plug force test

Brand Name:LY

Model Number:LY-C01

Place of Origin:Guangdong, China

...Force Package Testing Equipment For Clamp Compression Testing Clamp Compression Testing Method of Large Products 1.Before placing the packaged product between platens, verify that the clamp force using the clamp indicator. The indicator should be placed between the axes of the platen articulation points approximately 1/2 way up the platens. 2.Each time the product is clamped, the force...

Place of Origin:China

Brand Name:HongCe

Model Number:FL-1

... of IEC 60884-1 figure 21 which calls for 10,000 flexing at a rate of 60 flexing per minute. Six cables or cords fitted with plugs can be tested simultaneously. The cables are connected to a socket and the tail of the cable is connected to the

Place of Origin:China

Brand Name:HongCe

Model Number:FL-1

... of IEC 60884-1 figure 21 which calls for 10,000 flexing at a rate of 60 flexing per minute. Six cables or cords fitted with plugs can be tested simultaneously. The cables are connected to a socket and the tail of the cable is connected to the

Place of Origin:China

Brand Name:HongCe

Model Number:FL-1

... of IEC 60884-1 figure 21 which calls for 10,000 flexing at a rate of 60 flexing per minute. Six cables or cords fitted with plugs can be tested simultaneously. The cables are connected to a socket and the tail of the cable is connected to the

Brand Name:HongCe

Model Number:HC9914

Place of Origin:China

... socket-outlets and plugs with pins which are not solid, by means of an appropriate test apparatus. During the test, no sustained arcing shall occur. After the test, the specimens shall show no damage impairing their further use and the entry holes for

Brand Name:HongCe

Model Number:HC9919

Place of Origin:China

... requirement of IEC 60884-1 figure 21, which is used to process the bending test for the power cord of non rewirable plugs, appliances and similar electrical appliances (electric tools). The device can be preset test times (up to 999999), it can carry out

Brand Name:HongCe

Model Number:HC9910C

Place of Origin:China

... rise under normal operation of electrical appliances. Test sample: Household plugs and sockets Plug Socket Tester Feature: External type, thermocouple wire directly connected to the sample. PLC control and touch screen operation, ...

Place of Origin:China

Model Number:HC9915

Brand Name:HongCe

Plug Socket Tester for 30A 300V Making & Breaking Capacity and Normal Operation Load Testing Equipment Product Description The HC9915 Plug Socket Tester is a professionally engineered single-station power load cabinet designed for making and breaking capacity testing, normal operation testing, and load endurance verification of plugs...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-F762

...Force Furniture Testing Machines for Pounding Foam Dynamic Fatigue Testing Introduction : Single-seat sofa Durability Tester Overview : Can a sofa seat surface , backrest and armrests for alternating endurance test , each equipped with a pressure force point sensor reads pressure . Single-seat sofa Durability Tester design standards : EN4875 Main function : This test method is to simulate the daily use conditions , the test...

Brand Name:LONROY

Place of Origin:Guangdong, China

...Force Gauge High-Precision Force Calibrator Intelligent Force Standard Measuring Equipment Lab Test Machi Smart Standard Force Gauge High-Precision Force Calibrator Intelligent Force Standard Measuring Equipment Product Description Product Introduction The Smart Standard Force Gauge is developed and manufactured in accordance with the specifications of various standards, including "JJG144-2007 Standard Force...

Brand Name:Sinuo

Model Number:SN2104

Place of Origin:China

..." clause 23.3, 23.6.2, 23.6.3, figure 9 and table 12 and table 13. Product Information: Sample and limitations: connectors/plug connectors and appliance input sockets with ratings greater than 0.2A, and appliance input and

Brand Name:Pego

Place of Origin:China

Model Number:PG-CRT

...Testing Equipment IEC60320-1 Pull Test Equipment for Connectors and Plug Connectors 1. Introduction The pull test apparatus designs to meet the test requirements of IEC60320-1 clause 22.2.3 and figure 6, for testing the cord (cable) anchorage of connectors / plug connectors relieve from strain and twist. Fix the test sample in the test apparatus, so that the axis of the cord is vertical where it enters the connector / plug

Brand Name:LABTONE

Model Number:EV203

Place of Origin:Dongguang, China

...Force Vibration Test Equipment for Car Audio Testing Meet ISO 16750 Test requirements and model selection guide To choose a suitable vibration test system, the most important thing is to know the exciting force required to perform the vibration test. To evaluate and calculate the exciting force, the following test specifications should be known: Clear Testing...

Brand Name:Haida

Model Number:HD-F743

Place of Origin:China

...Force Lab Furniture Fatigue Testing equipment Product Description: Chair Base Vertical Force Tester is used for the vertical pressure testing, destructive testing and fatigue testing of the office chair Ipomoea base (Star Base), repeated pressure loading in setting force and test cycle as the fatigue test. All holding pressure time and cycle number of tests...

Brand Name:Cartesysj

Model Number:CTJZMT-300B

Place of Origin:China

... for two wheels is specially designed to inspect the brake performance and axle-load value as well as speedometer of Motorcycle or Electric vehicle. Combined with the Brake Force tester & Axle load(weighting) tester & Wheel clamp testing mechanism,

Brand Name:Cartesysj

Model Number:CTJZMT-300B

Place of Origin:China

... for two wheels is specially designed to inspect the brake performance and axle-load value as well as speedometer of Motorcycle or Electric vehicle. Combined with the Brake Force tester & Axle load(weighting) tester & Wheel clamp testing mechanism,

Brand Name:Cartesysj

Model Number:CTJZMT-300B

Place of Origin:China

...Testing Line Include Brake Force Axle Load Speedometer Clamping Wheel Alignment Headlight Tester Noise Meter Test item/Features: Motorcycle (EV) tester for two wheels is specially designed to inspect the brake performance and axle-load value as well as speedometer of Motorcycle or Electric vehicle. Combined with the Brake Force tester & Axle load(weighting) tester & Wheel clamp testing

Brand Name:Zhongli

Model Number:ZL-8001B

Place of Origin:China

...Testing Machine Equipment summary: The machine is designed by mechanical-electrical integration, composition of the force-measuring sensor, transmitter, microprocessor, mechanism of load drive , computer and color inkjet printer. High-precision electronic motor can be set to five-speed, the components are connected by plug...

Brand Name:Zhongli

Model Number:ZL-8001B

Place of Origin:China

...Testing Machine Equipment summary: The machine is designed by mechanical-electrical integration, composition of the force-measuring sensor, transmitter, microprocessor, mechanism of load drive , computer and color inkjet printer. High-precision electronic motor can be set to five-speed, the components are connected by plug...

Brand Name:Sinuo

Model Number:SNQC1023A

Place of Origin:China

... devices such as electric vehicle charging interfaces, industrial plugs and sockets, and couplers can withstand the mechanical stress, electrical stress, and thermal stress that occur during normal use without excessive wear or other harmful ...