uniform splitting fbt coupler splitters

Brand Name:Gezhi or OEM

Model Number:1X2 FBT Coupler Splitter

Place of Origin:China

... using Fused Biconical Tape technology. 2. It features small size, high reliability, cheap cost and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting. 3.It provides whole

Brand Name:Geehe

Model Number:GH-AS-1×2

Place of Origin:Wuhan China

...FBT Coupler Splitters with ABS Box Optic Coupler Brief Introduces: Fiber Optic Couplers have been developed using fused fiber technology. The optical fiber couplers allow bi-directional coupling and can be used to either split or combine signals. 1×2 Fiber Splitter Singlemode FBT Type SPTF12 is designed to splitting fiber signals to a certain ratio with different fiber cable and connectors. The splitter...

Brand Name:UNIFIBER-OEM

Model Number:1x2 fbt coupler splitter steel tube 0.9mm FC/APC

Place of Origin:CHINA

...fbt coupler splitter steel tube 0.9mm FC/APC Singlemode coupler 1X2 2X2 offer very low insertion loss, low polarization dependence and excellent environmental stability Accurate coupling ratio from 50/50 to 1/99 and fiber type 250um bare fiber, 3mm and 900um loose tube fiber are available with very tight uniformity. Singlemode standard coupler and wideband coupler components find extensive application to perform power splitting...

Brand Name:CFO

Model Number:1*2 FBT coupler/splitter

Place of Origin:China

... products. 1. Features: - Good uniformity and low insertion loss - Low Polarization Dependent Loss - Excellent Environmental Stability - Stability Telcordia GR-1221 and GR-...

Categories:FTTH Products

Country/Region:china

... the light power. The key parameters include center wavelength, bandwidth, and excess loss, coupling ratio, PDL and so on. All-optical fused couplers which employ FBT technique are proved to have

Brand Name:KCO, Kocent Optec Limited

Model Number:FBT-Dual-FCU-3.0

Place of Origin:China

...Windows 1*2 FBT Coupler Splitter Description: Dual Window Wideband Couplers are high quality components designed to divide or combine optical signal in optical fiber system. These devices are fabricated by using the fused bi-conical taper (FBT) process...

Brand Name:KCO, Kocent Optec Limited

Model Number:FBT-Dual-FCU-3.0

Place of Origin:China

... fiber system. These devices are fabricated by using the fused bi-conical taper (FBT) process are reliable over wide range of temperature. The operating wavelength is 1310nm and 1550nm and the passband is 80nm. The coupling ratio can range from 1:99 to

Brand Name:SLR

Model Number:SL-FBT-1:2 APC

Place of Origin:GUANGDONG CHINA

...FBT Coupler Splitter Fiber Optic Coupler FBT Splitter is the short form for Fused Biconical Taper . FBT splitter is common used for splitting or combining optical signals. The splitting or coupling ratio can be OEM upon costumer request as well as the amount of splitting ports. The FBT Splitter coupler supports dicrete wavelength window. Features: 1: Mature Production technolody for FBT...

Place of Origin:China

Brand Name:JIE TAI XIN

Model Number:JT-4005-FBTFU-01

...FBT Optical Coupler 10/90 1310/1490/1550Nm Uniform Power Splitting Description FBT OPTICAL Coupler is a splitter which based on fused biconical taper technology. It is widely accepted and used in passive optical networks (PON) solution. FBT coupler is a traditional technology that two fibers are typically twisted and fused together while the assembly is being elongated and tapered. a wide breadth of FBT Coupler splitters...

Brand Name:DYS/OEM

Model Number:FBT Coupler

Place of Origin:shenzhen

FBT Optical Fiber Splitter 1x2 PON FBT Copler Splitter Fiber Optic Coupler SC / APC Connector 1x16 Fiber Optic PLC Splitter / Coupler 1. fbt splitter is a type of optical power management device that is fabricated using Fused Biconical Tape technology. 2. It features small size, high reliability, cheap cost and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting...

Brand Name:SUNET/OEM

Model Number:Sc/Apc

Place of Origin:Qingdao, China

...Fbt Coupler FBT Description Fiber Optic FBT splitter is a type of optical power management device that is fabricated using Fused Biconical Tape Technology. It features small size, high reliability, cheap cost and good channel-to-channel uniformity,and is widely used in PON networks to realize optical signal power splitting. SUNET provide a reliable solution to split/combine signals.The splitting

Brand Name:Geehe,OEM

Model Number:Single Mode FBT Coupler

Place of Origin:Hubei,China

... technology. It features small size, high reliability, cheap cost and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting. Rollball provides whole series of 1xN and 2xN splitter products that are

Place of Origin:China

...Fbt Splitter Coupler (0) 1X2 1*2 fiber optic FBT splitter coupler 1. Description fbt splitter is a type of optical power management device that is fabricated using Fused Biconical Tape technology. It features small size, high reliability, cheap cost and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting. hongking provides whole series of 1xN and 2xN splitter

Model Number:FBT SC/APC

Place of Origin:China

...FBT 1×48 Splitter/Coupler Single Mode With Plastic Box SC/APC Connectors 2mm 3mm Introduction: Optical coupler is an optical device that combines or splits power from optical fibers. Optical splitter divides light from a single fiber into two or more fiber channels. Compliance : Telcordia GR-1209-CORE Telcordia GR-1221-CORE RoHS Features: Low Insertion loss Low PDL Compact Design Good channel-to-channel uniformity...

Brand Name:GAPHO

Model Number:coupler

Place of Origin:China

... Fused Biconical Tape technology. It features small size, high reliability, cheap cost and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting. 1x2 multi mode FBT coupler with some features,such

Categories:Fiber Optic Splitter

Country/Region:china

...Fbt Coupler 1*2 Fbt Splitter with Sc/APC Connector Product Parameters Technical parameters Type 1x2 single mode FBT splitter Operating Wavelength(nm) 1310/1550nm Split Ratio from 50/50 to 5/95 Polarization Dependent Loss(dB) <0.2 Directivity(dB) APC>55,UPC>50 Order information Code Splitter...

Brand Name:FOCABLE

Model Number:Multimode FBT Coupler

Place of Origin:China

FBT Fiber Splitter, ABS Module Type Multimode Fiber Splitter with 3.0mm Tube Fused Biconical Taper (FBT) Coupler is a kind of coupler fused by taper machine through fusing two or several pieces of optical fiber bundle. It has the advantages of small volume, high reliability, excellent uniformity. FOC COMMUNICATION CO., LTD provides 1*N and 2*N fiber optic couplers. And these fiber optic couplers...

Brand Name:KNOFC or OEM

Model Number:FBT Splitter 1*2 SC/APC

Place of Origin:China

...FBT Splitter Coupler SC/APC 1310/1550nm 50/50 Ratio Type Description: Planar light wave circuit (PLC) splitters is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting...

Brand Name:monoluxtecs

Model Number:TS00589

Place of Origin:CHINA

...Splitter Coupling Ratio LC/UPC 1x2 FBT Coupler 1*2 FBT Multimode 850/1310nm 50/125 MM 50/50 About this item: Multimode Coupler are fabricated from graded index fibers with core diameters of 50um or 62.5um. Standard multimode couplers are commonly used in short distance communications with LED sources operating at 1310nm or 850nm. Multimode couplers are wavelength independent over a broad range of wavelengths with uniform...

Brand Name:KEXINT

Model Number:KXT-FBT-1x2-LC/UPC

Place of Origin:SHENZHEN

... Tape technology . KEXINT offers both tree and star type inline couplers/splitters. They provide a reliable solution to split/combine signals. The splitting ratio ranges from 1x2 to 1x32 ports for tree couplers, and from 2x2 up to 2x32 for star couplers.