ul1581 flame test equipment

Brand Name:kingpo

Model Number:KP-FT02

Place of Origin:china

...Flame Tester, IEC60695-11-5 Flammability Testing Equipment Introduction Needle Flame Tester is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695 -11-5,GB/T5169.5-2008,GB4706.1-2005 ,etc. Needle Flame...

Brand Name:Haida

Model Number:6010-HD

Place of Origin:China

... test instruments. During measurement, the copper block is positioned 6±0.5mm above the needle flame burner. The flame is ignited, and the time required for the copper block temperature to rise from 100°C±5°C to 700°C±3°C must be within 23.5±1.0

Brand Name:AI

Model Number:BMS

Place of Origin:China

... that controls the heat flux, flame distribution and duration of the flame test manikin. The Instrumented Manikin Flame Engulfment Test Equipment can be used to analyze the burn range and measure the time of 2nd and 3rd degree burn using this system."

Brand Name:DAXIAN

Model Number:DX8485

Place of Origin:China

... line with UL758, UL1581, UL62, ASTM, GB-1690, IEC811 test standards. Scope of application: It is mainly applicable to the PVC sheath insulation and sheath test of wire and cable. Technical Parameters: 1, the temperature range: room temperature ~ 250 °C

Brand Name:HJ

Model Number:NF-2

Place of Origin:China

... test method – Apparatus, confirmatory test arrangement and guidance. Test sample: It is applicable to electrotechnical equipment, its sub-assemblies and components and to solid electrical insulating materials or other combustible materials. Feature: The

Brand Name:PEGO GROUP

Model Number:PG-NF

Place of Origin:China

...Flame Tester for electronic Appliance with CNAS Certificate 1. Introduction Needle flame tester is designed according to IEC60695-11-5(IEC60695-2-2). It is applicable to ignition hazard test, combustibility test of electronic industry and home electronic appliance. The equipment specifies a needle-flame test to simulate the effect of a small flame...

Place of Origin:China

Brand Name:HongCe

Model Number:NF-1

... it with butane gas. The fire hazard of the equipment when there is flammule inside the equipment that caused due to the fault condition is assessed by whether the specimen can be ignited or the combustion time and length. This tester conforms to the

Brand Name:AI

Model Number:GVF

Place of Origin:CHINA

...flame resistance test equipment, developed according to GB/T17622-2008 and EN 60903, the insulation gloves standard, suitable for live working insulation gloves flame resistance test. Performance characteristics 1. The standard stainless steel box is equipped with a transparent observation window, which can detect the flame spread rate in time; 2. Insulating gloves flame resistance test equipment is equipped

Brand Name:HongCe

Model Number:NF-2

Place of Origin:China

... wire test equipment, hot wire ignition test machine and etc.. The new version PLC control 7 inch needle-flame tester is designed and manufactured according to the standard requirement of IEC60695-11-5,IEC60335-1, GB4706.1-2005, GB5169.5-2008 and etc.. It

Brand Name:DAXIAN

Model Number:DX8369

Place of Origin:China

...Test Single Flame Source Flammability Testing Equipment Description: Ignitability test, also called single-flame source test.Test apparatus corresponds to standard EN ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 45°-tilted burner is advanced horizontally until the flame...

Brand Name:DAXIAN

Model Number:DX8220

Place of Origin:China

... Parameters: 1. Ambient temperature: -5 °C -30 °C 2. Relative humidity: ≤85% 3. Supply voltage and power: 220V ± 10%, 50HZ, 100W; 4. The burner flame 250mm temperature of 950 °C ± 50 °C 5. Adjustable flame time steplessly adjustable 6.

Brand Name:DAXIAN

Model Number:DX8651

Place of Origin:China

... a test specimen. - Following ignition, any flame front which develops is noted and a record is made of the progression of the flame front horizontally along the length of the specimen in terms of the time it takes to travel to various distances. - The

Brand Name:lixian

Model Number:HZ-8108

Place of Origin:China

...Testing Equipment Helmet Flame Retardant Tester HZ-8108 GB/T 2812－2006 Ambient Temperature -10 ℃ -30 ℃. Equipment Description: Flame retardant used to test helmets. Main characteristics: 1, the electronic ignition. 2, burner automatic timing positioning. 3, the ignition time 0-99.9 seconds arbitrary, continued burning time, smoldering times are automatically recorded, the digital display. 4, flame height adjustable, with flame height flame

Brand Name:HJ

Model Number:VF-1

Place of Origin:China

...Testing Equipment For Vertical Flame Propagation For Single Insulated Cable Standard: IEC 60332-1-1 Tests on electric and optical fibre cables under fire conditions –Part 1-1: Test for vertical flame propagation for a single insulated wire or cable – Apparatus; IEC 60332-1-2 Tests on electric and optical fibre cables under fire conditions –Part 1-2: Test for vertical flame...

Brand Name:YUYANG

Model Number:YY101

Place of Origin:China

...Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 45°-tilted burner is advanced horizontally until the flame (length 20 mm) reaches the

Brand Name:PRECISION

Model Number:SBB20

Place of Origin:CHINA

... of materials is of utmost importance. The Vertical And Horizontal Flame Test Chamber is a cutting-edge apparatus designed specifically to meet the stringent requirements of these sectors, providing accurate and reliable assessment of the flammability and

Brand Name:PRECISION

Model Number:VHFC20

Place of Origin:CHINA

... And Horizontal Flame Test Chamber for Textiles and Apparel In the textile and apparel industry, where consumer safety and regulatory compliance are of paramount importance, the Flammability Resistance Tester UL94 Vertical And Horizontal Flame Test Chamber...

Brand Name:HongCe

Model Number:NF-2

Place of Origin:China

...Flame Tester Plc Control The New IEC60695 Flammability Test Machine Products Introduction This part of IEC 60695 specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess the fire hazard by a simulation technique. It is applicable to electrotechnical equipment...

Brand Name:AI

Model Number:VF-1

Place of Origin:China

... used in upholstered furniture. Meet CFR 1615/1616, ASTM D6413 and CALIF TB117.​ Features: ASTM D6413 Vertical Flame Spread Test Equipment uses stainless steel test cabinet with glass observation panel. Back wall painted black for easy test viewing.

Brand Name:PEGO Group

Model Number:HVR-4H

Place of Origin:China

... test includes V-0, V-1, V-2, horizontal flame tester HB, and 500W vertical flame test includes 5VA, 5VB, HF-1, HF-2 and HBF. It is widely used in the R&D department, QC department and production department of lighting equipment, low-voltage apparatus,