uat testing tools

Brand Name:HongCe

Model Number:HT-I04T

Place of Origin:China

...codes. It is used to verify the protection of persons against access to hazardous parts. Also it is used to verify the protection against access with a tool. The handle and stop face are made of nylon. The rod is made of stainless steel, with dynamometer.

Brand Name:PEGO

Model Number:PG-TPC

Place of Origin:China

... and etc. This rod is intended to verify the protection of persons against access to hazardous parts. It is used to verify protection against access with a tool. Specification: Length of test rod: 100mm Diameter of test rod: 2.5mm Dimater of stop sphere:

Brand Name:PEGO

Model Number:PG-FNP

Place of Origin:China

... to verify adequate clearance from hazardous parts. Object probe: a test probe simulating a solid foreign object to verify the possibility of ingress into an enclosure. IP code probe: a test probe to verify the degrees of protection specified in IEC60529.

Brand Name:BOTO

Model Number:B-TH-225

Place of Origin:China

... tests. It is an ideal tool for product research and development, quality control, reliability testing and accelerated life test. This test chamber is featured with power source of AC:220V/380V 50/60Hz, temperature range of -70°C To +150°C (180℃),

Brand Name:Fanke High-voltage

Model Number:FK-CT1A desk type

Place of Origin:Wuhan ,China

Insulator Salt Density Tester , Desk Type Salt Density Tester , Digital Display I. Product Description: FK-CT1A digital salt density tester is designed to test the equivalent salt deposit density of insulators, with a easy reading of formula. Rotating ...

Brand Name:Fanke High-voltage

Model Number:FK-CT1A desk type

Place of Origin:Wuhan ,China

Insulator Salt Density Tester , Desk Type Salt Density Tester , Digital Display I. Product Description: FK-CT1A digital salt density tester is designed to test the equivalent salt deposit density of insulators, with a easy reading of formula. Rotating ...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-W802

...Testing Machine Introduction: Seam fatigue testing machine is mainly used to test the fabric or leather , car inner decoration material seam fatigue ( dynamic or static ) Standard : JASO M403 , TSL2100G Toyota Corporation engineering standards . Parameters: the moving distance 150mm the sample number of groups group 2 ( 50mm*100mm ) rotary speed 30r . p . m the specimen holder tool...

Brand Name:AIP

Model Number:AIP886X

Place of Origin:China

..., power tool etc, are able to test electrical performance of FCT accurately. The testing system is composed of test stand, IPC, test unit, system software and functional modules. Start the system, all set tests will be performed and displayed test data,

Brand Name:SAMYON

Model Number:JW-225

Place of Origin:CN

...Tool Steel Test Anvil Used To Calibrate The Test Hammer JW-225 Test Anvil Used To Calibrate The Test Hammer Application: It is used to calibrate the test hammer. Parameters: Item Names Details 1 Steel core hardness 60+/-2HRC 2 Rebound value fall range 80+/-2 3 Rebound value fall range (Test hammer impact energy 0.735J and 0.196J) 74+/-2 4 Weight 16kg Features: 1. Test anvil must be located on horizontal ground, take test...

Brand Name:Pootab

Model Number:PT-1100-100

Place of Origin:Guangdong

...Testing Machine is a computer-controlled testing machine designed for versatile material testing applications. It offers precise and accurate measurements of various parameters, making it an essential tool in the field of materials testing. Features: Maximum Testing Force: 100 kN Testing Force Measurement Range: 0.4% - 100% Testing...

Brand Name:HIGHLAND

Model Number:YST450

Place of Origin:China Dezhou

... used in excavators. With a flow rate of 450L/min and a pressure capacity of 42 Mpa, this hydraulic test bench is built to handle high pressure testing for excavator hydraulic systems. The YST450 Hydraulic Test Benches is an essential tool for ensuring the

Brand Name:Sinuo

Model Number:SN991

Place of Origin:China

...Test Caps Set Bending Test Shafts for Lamp Socket Testing Product Description This Lampholder Test Cap Set is engineered for conducting mechanical bending tests on common light socket types, including E14, E27, and GU10. These test caps are essential tools for verifying the structural integrity and compliance of lamp holders during quality inspection and certification procedures. Each test...

Brand Name:KM

Model Number:KM-342-32L-8

Place of Origin:Shaanxi, China

0-0.8mm Six Jewels Dial Test Indicator Measuring Tool with 0.01mm Graduation Quick Detail: 1. Metric measurement. 2. Dovetails on top and back for all-around positioning. 3. Six Jewels inner wear-resist bearing housings. 4. 180° swiveling and two ...

Brand Name:KM

Model Number:KM-342-38B-8

Place of Origin:Shaanxi, China

0-0.8mm Dial Test Indicator with Ruby Contact Point Measuring Tools Quick Detail: 1. Metric measurement. 2. Dovetails on top and back for all-around positioning. 3. Jeweled movement. 4. 180° swiveling and two directional functions. 5. Ruby contact point...

Brand Name:KM

Model Number:KM-342-15-3

Place of Origin:Shaanxi, China

High Precision 0-0.03′′ Inch Dial Test Indicator Lathe Tools Quick Detail: 1. Inch measurement. 2. Dovetails on top and back for all-around positioning. 3. Jeweled movement. 4. 180° swiveling and two directional functions. 5. Steel contact point. 6. ...

Brand Name:kingpo

Model Number:IEC62368-1-Annex P

Place of Origin:china

Terminal probe Reference Standard: IEC62368-1-Figure V.5 Technical Parameters: 1, Test Probe Length :13mm 2, Test Probe Diameter:1.0 (0, +0.005)mm 3, Dam- sphere Diameter:35mm 4, Handle Diameter:10mm 5, Handle Length :100mm 6, According to IEC61032 figure...

Brand Name:kingpo

Place of Origin:china

... Series Partial Discharge Tester is a state-of-the-art high voltage partial discharge tester designed for rigorous testing of insulation integrity in devices such as high voltage isolation ICs (e.g., optocouplers, magnetic couplers, isolation amplifiers,

Brand Name:HUATEC

Model Number:HT-6520N

Place of Origin:CHINA

...testing. The ideal and necessary tool for production of precise screen and steel mesh. Features * Suitable for general wire mesh tension and steel mesh tension measurement. * Suitable for screen printing and screen stencil measurement, high accuracy. The ideal and necessary tool for production

Place of Origin:Zhejiang, China (Mainland)

Brand Name:LE

Model Number:LE-2468B

Network cable tester for RJ45 / BNC Features: *Available for RJ45(UTP/STP), USB, RJ11/RJ12 BNC Coaxial. RCA and modular cables *Operate with Auto Scan or step by step(TEST)mod Our Advantages 1. 100% Manufacturer. 2. Our steel is from Shanghai ShouGang ...