transformer core adjustable stacking table

Place of Origin:JiangSu,China

Brand Name:HengTong

Model Number:Customer settings

...Transformer Laminations Core Cold Rolled EI Lamination Silicon Steel Transformer Core The iron core is the main magnetic circuit part in the transformer. It is usually formed by stacking hot-rolled or cold-rolled silicon steel sheets with high silicon content and coated with insulating paint on the surface. The iron core...

Brand Name:CENTERSKY

Model Number:Single Phase EI 114, EI 126, EI 133.2, EI 152.4. EI 192, EI 240

Place of Origin:Jiangyin, Jiangsu, China

... grain-oriented electrical steel that are later stacked to create the core. The primary and secondary windings are wound on bobbins. Multiple bobbins are placed on spindles and spun in order to apply the windings. This method of using ...

Brand Name:STT

Model Number:HJX400-LLB

Place of Origin:China

... transformer iron core. The transformer core cutting machine adopts single-side locating and can adjust the core width manually. Servo motors are used to drive punch and cut action. The transformer core cutting machine’s feeding system is also driven by

Brand Name:CENTERSKY

Model Number:EI-120

Place of Origin:JIANGYIN,CHNA

... applied to the primary winding. When a transformer is used to increase the voltage on its secondary winding with respect to the primary, it is called a step-up transformer. When it is used to decrease the voltage on the secondary winding with respect to

Brand Name:LIANGUI

Model Number:EI-133

Place of Origin:CHINA

I. Product Overview The Semi-Automatic EI Laminator is a dedicated device specifically designed for the production of low-frequency EI-type transformer cores. It is primarily used to accurately insert EI-type silicon steel laminations into the transformer ...

Place of Origin:Guangdong, China

...transformer core is a widely used magnetic core structure composed of E-shaped and I-shaped laminated silicon steel sheets. Designed for efficient magnetic flux conduction, it is commonly employed in power transformers, inductors, and various electrical equipment. Its stacked...

Brand Name:CENTERSKY

Model Number:3PEI 20---3PEI 120

Place of Origin:JIANGYIN

..., W470, W400 etc, all of the grades mentioned in the technical data. at the same time, we can match Chinese steel according to your steel data. About the quality, the bur of the core is from 0-0

Brand Name:CENTERSKY

Model Number:EI 30---EI 600

Place of Origin:JIANGYIN

... and spun in order to apply the windings. This method of using bobbins allows for automation that reduces the manufacturing times and also provides insulation between the windings and the core. The E-I core laminations are stacked inside the bobbins to

Brand Name:King Magnetics

Model Number:KMAC-20

Place of Origin:Zhuhai Guangdong China

...transformer core c type finemet nanocrystalline core Product Description Features Material: Fe-based amorphous core Saturation flux density induction: 1.56T Curie temperature(℃): 410 Stacking factor: >0.8 Saturation magnetostriction(*10^-6): <30 Resistivity (μΩ.cm): 110 Ribbon thickness: 25μm Core shape: C core Applications >> Solar inverter filter >> PFC choke >> Midium frequency transformer...

Brand Name:Qiancheng

Model Number:H567#

Place of Origin:Guandong,China

...adjustable coffee tables The Coffee table and side table collection is inspired by a traditional Japanese system of construction. The units are stacked on top of each other to create an overlapping effect that forms a beautiful and unique design. The stacked...

Brand Name:CENTERSKY

Model Number:Three Phase EI100 EI150 EI200 EI300 EI400

Place of Origin:JIANGYIN

...Transformer Construction In an E-I structure, the matching “E” and “I” components are stamped from sheets of thin grain-oriented electrical steel that are later stacked to create the core. The primary and secondary windings are wound on bobbins. Multiple bobbins are placed on spindles and spun in order to apply the windings. Introduction: Three phase EI core...

Brand Name:CENTERSKY

Model Number:EI 114. EI 126, EI 133.2, EI 152.4, EI 162, EI 168, EI 180, EI 192

Place of Origin:Jiangyin, Jiangsu, China

...Transformer Construction In an E-I structure, the matching “E” and “I” components are stamped from sheets of thin grain-oriented electrical steel that are later stacked to create the core. The primary and secondary windings are wound on bobbins. Multiple bobbins are placed on spindles and spun in order to apply the windings. Introduction: Single phase EI core...

Brand Name:STT

Model Number:HJX400-LL

Place of Origin:China

...Transformer Core Description of cutting machine HJX400-LL Two cutting and two punching cutting machine HJX400-LL is for cutting silicon steel strip to make transformer iron core. The cutting machine ‘s transverse shear line adopts single-side location and the cutting width can be adjusted...

Brand Name:CENTERSKY

Model Number:3PEI 20---3PEI 120

Place of Origin:JIANGYIN

... (CRGO), the thickness is from 0.23mm-0.5mm in our factory. We are offering a variety of different specifications to meet your requirements, or customized according to your needs. EI Core high-speed punch Lamination Table TYPE a b c d e

Brand Name:CENTERSKY

Model Number:3PEI 20---3PEI 120

Place of Origin:JIANGYIN

... of the transformer lamination core can be customized. Catalog: EI Core high-speed punch Lamination Table TYPE a b c d e holes aperture EI_28 28 4 6 8 17 EI_35 35 5 7.5 10 19.5 EI_41 41 6 8 13 21 EI_42 ...

Brand Name:STT

Model Number:ZJX1250

Place of Origin:China

...Transformer Core Slitting Machine Making Steel Strip Description of core slitting machine ZJX1250 Automatic transformer core slitting machine ZJX1250 is for cutting coiled silicon steel into several silicon steel strips with a set width. The cut strips can be wound into coils. The slitting speed of the core slitting machine can be adjusted as requested. The machine is very easy to be operated. Quick details of core...

Brand Name:STT

Model Number:ZJX1250

Place of Origin:China

Transformer core making equipment Silicon Steel Coil Slitting Machine Description of core slitting machine ZJX1250 Core slitting machine ZJX1250 is a special equipment for slitting silicon steel coil, which can be used to make different width of strips. These strips can be cut to make outer legs, center legs and VN yoke of transformer core. The slitting speed of the core slitting machine can be adjusted...

Brand Name:LIANGUI

Model Number:EI28-133

I. Equipment Overview The Hand-Cranked EI Laminator is a manually operated laminating device primarily used to neatly and quickly insert EI-type silicon steel sheets into coil bobbins. It is suitable for the mass production of electronic components such as...

Brand Name:LIANGUI

Model Number:LG2-08A

Place of Origin:CHINA

Semi-automatic inserting machine for EI sheet of low frequency transformer Product description: The semi-automatic transformer inserting machine is an improved product developed on the basis of the "hand-operated inserting machine". The new product is an ...

Brand Name:AUTOFOR

Model Number:ATF

Place of Origin:China

abrasive waterjet cutting machine for transformer cores Application: silicon steel, silicon steel, amorphous, nanocrystalline, transformer, ultrafine crystal, permolloy, iron silicon aluminum, iron silicon, ferrite, denture dental, spring steel, stainless ...