testing the software

Brand Name:Sinuo

Model Number:SN1104-3

Place of Origin:China

...Testing Equipment Circuit 3 Impulse Test Generator Complied Standards & Clauses This surge test generator conforms to IEC 62368-1:2018 clause 5.4.2, 5.5.8 and Annex D, circuit 3 of Table D.1, Annex G.10, etc., IEC 60950-1:2013 clause 7.4.2, reference 3 of table N.1, IEC60065:2014 clause 10.2, 13.3.4 a). Equipments Overview 7-inch touch LCD interface, rich in functions, easy to operate, easy to upgrade software...

Model Number:SNB02D-2kN

Brand Name:Sinuo

Place of Origin:China

...testing standards including IEC 62196-3:2026 Clause 9, IEC 62196-1:2025 Clauses 9, 13.3.2, 16.9, 26.7.3, Table 6, and BS 1363-2 Clauses 11.10.7 and 13.11.4. Controlled by dedicated computer software, it is widely used for mechanical performance testing of

Brand Name:PEGO

Model Number:EMI

Place of Origin:China

...Test Equipment 9KHz~300MHz EMI Conducted Interference Test System EMI Receiver 1. Configuration Name Model Description EMI Conducted Interference Test System (Includes Artificial mains network (LISN), receiver, software) EMC500 Test range: 9K~300MHz. Among them, 30M~300MHz is radiation disturbance test...

Brand Name:AIP

Model Number:AIP89XX

Place of Origin:China

...Testing Machine For Factory acceptance Test 1. Tested motor picture 2. Machine introduction 2.1 Linux operating system, professional software, clear interface 2.2 The power supply of the testing machine accepts customization as national power grid required. 2.3 Standard equipped with yellow, green and red indicating light. Yellow-in test, green-pass, red-fail. 2.4 Test...

Brand Name:AIP

Model Number:AIP89XX

Place of Origin:China

...Testing Machine For Factory acceptance Test, Electric Motor Test 1. Product description High performance: compatible to test Hipot, insulation resistance, surge, winding resistance, rotation, no-load and stall. Easy-to-maintain: support intelligent self-diagnose, remote control failure diagnosis and online software upgrading. Modular design: independent test module design, all the test...

Brand Name:AIP

Model Number:AIP89XX

Place of Origin:China

...: Test object Squirrel-Cage Rotor Display mode 19” LCD display Parameter save Software Test mode Continuous / single step mode Diameter range Outer diameter: 20-100mm Inner diameter: 4-29mm Lamination height: 100mm (Max) Customized Test The quantity of

Brand Name:AIP

Model Number:AIP89XX

Place of Origin:China

... The conducting bar and end ring Display mode 19” LCD Parameter save Software save Test mode Continuous mode / single mode Dimension range Outer diameter: 20-100mm Inner diameter: 4-29mm Lamination ...

Brand Name:HAIDA

Model Number:HD-B616

Place of Origin:Guangdong, China (Mainland)

...h different grips: tensile, bend, compression, shear test. Software can issue report with results for max. force, elongation, tensile strength, compression strength, bend strength, etc. Steel bar tensile testing machine can perform tensile, compression,

Brand Name:JZHY

Model Number:JZ-2000

Place of Origin:China

...Test Bench Standard Functions: Can test stress Gear flow sensor Can test pulse width Test piezo fuel injectors Test common rail injectors Flow sensor linear calibration Fuel tank oil level lower limit alarm High pressure flushing of injectors Remote software upgrade, data update Test oil automatic heating /cooling control Real-time display oil injection/return curves Test...

Brand Name:JZHY

Model Number:JZ-2000

Place of Origin:China

...Test Bench Standard Functions: Can test stress Gear flow sensor Can test pulse width Test piezo fuel injectors Test common rail injectors Flow sensor linear calibration Fuel tank oil level lower limit alarm High pressure flushing of injectors Remote software upgrade, data update Test oil automatic heating /cooling control Real-time display oil injection/return curves Test...

Model Number:LR-A006

Place of Origin:China

Brand Name:Lonroy

...Test Machine Plastic Test UL 817 Wire Swing Bending Machine Cable Bending Test Machine 1.Use The test machine is in accordance with UL817 and other relevant standards "general safety requirements for software components and power supply cord".Applicable for bending test of power cord and DC line by related manufacturer and quality inspection department. 2.Specification Test...

Brand Name:LONROY

Place of Origin:Guangdong, China

Model Number:LR-PWS-10

...tester Summarize Electro-hydraulic servo dynamic and static universal testing machine is composed of main machine, constant pressure servo pump station, full digital servo controller, control software, Advantech industrial control computer, accessories and

Model Number:ZL-6041

Place of Origin:China

Brand Name:ZL

...high-precision battery tester with a high-temperature test chamber. Parameters can be configured via controller or computer software to perform charging and discharging tests on various batteries. This system tests battery capacity, voltage, and current,

Model Number:UP-2001

Place of Origin:CHINA

Brand Name:YOUBI

... desktop universal material testing equipment. Equipped with precision servo motor and ball screw transmission, controlled by professional computer testing software, it performs tensile, compression, peeling, tearing, bending and shear tests. The system

Brand Name:iqualitrol

Model Number:PCHVT-10Z

...Software Download Technical Data: iqualitrol Touch Screen Digital Vickers Hardness Tester Brief Introduction: iqualitrol Integrated intelligent visual hardness tester, only need to operate a touch panel computer, easy to get the measurement! And all the parameters required for the test...

Brand Name:iqualitrol

Model Number:VHB-3000

Touch Controller Vision Brinell Hardness Tester VHB-3000 with Auto Measurement Software Download Technical Data: iqualitrol Brinell Tester VHB-3000 Technical Specifications: Model VHB-3000 Test force 612.9, 980.7, 1226, 1839, 2452, 4903, 7355, 9807, 14710...

Brand Name:KeJian

Model Number:KJ-1065B

Place of Origin:Dongguan China

...products 90 degree peel strength and stripping strength 180 degree, mold testing Interface to allow for tape adhesion performance of products.And can test tensile strength of base material.Other: this instrument can be operated through the software editor,

Brand Name:KINSGEO

Model Number:KJ-1065

Place of Origin:China

...Testing Machine Manufacture Uses This machine is designed specially for the adhesive,tape,plastic film,BOPP,PET industry. Used to test peeling strength with different methods. It can perform the 180&90 degree, T-shape peeling test and tensile,shearing&spliting strength test with different clamps. Character 1.Using the computer as the main control mathine plus the special testing software

Brand Name:PTE

Model Number:Touch Screen Pendulum Electronic Impact Testing Machines, User-Friendly Operation

Place of Origin:China

...Testing Machines, User-Friendly Operation Features:Support for automatic/manual printing. Impact energy displayed intuitively on the LED screen in a large font size. Capable of communications with a computer, enabling computer software controlled operations. Software...