socket tester

Brand Name:HongCe

Model Number:CL-4

Place of Origin:China

UL486A - 486B and UL498 SD5.3 Test Method B Conductor Damage Degree Test Machine Product overview: This testing machine is also called the test apparatus for checking damage degree of wire which confirms to standards UL486A-486B and UL498 SD5.3 test method...

Brand Name:HongCe

Model Number:HO6502

Place of Origin:China

Coupler Withdrawal Testing Apparatus Used To Ascertain The Maximum And Min. Force Standard:Confirm to the IEC60320-1 clause 16 figure12 standard requirement. Application:This device is mainly used to ascertain the maximum force necessary to withdraw the ...

Brand Name:HongCe

Model Number:HC9907

Place of Origin:China

IEC60884 Clause 24 Measuring Non-Solid Pins Mechanical Strength Stainless Steel Testing Machine Product information:The appliance is checked by the test of IEC60884-1clause 24, figure 14, for pins which are not solid, by the following test which is mad...

Brand Name:HongCe

Model Number:HC9936

Place of Origin:China

IEC60884 Clause 30.1figure 41 Testing Equipment Of 3 Working Station High Temperature Indentation Device Standard: IEC 60884-1 2013 clause 30.1 and figure 41, IEC 60598- 2-20 clause 20.15 and EN 60811-3-1 Application: This device is use for testing ...

Brand Name:HongCe

Model Number:HC9903

Place of Origin:China

IEC60884 Clause 12.2.2 Single Working Station Conductor Damage Degree IEC Testing Device Standard: IEC60884-1 2013 clause 12.2.2, 12.3.10 and figure 11, IEC60669-1, UL486A-B Application: This device is use to check whether the terminals with screw and ...

Brand Name:HongCe

Model Number:HC9926

Place of Origin:China

IEC60884 Clause 24.7 Insulation Sleeves Of Plug Pins Abrasion Test Apparatus Of IEC Testing Equipment Standard: IEC 60884-1 2013 clause 24.7 and figure 28, BS1363-1 figure 9 Application: This device is use for test the abrasion resistance strength of ...

Brand Name:HongCe

Model Number:HC9915F

Place of Origin:China

IEC60669 Clause 18.3 Halogen Filament Lamp Load Bank For switches Of Overload Test Standard UL1054,UL943, IEC 60669-1 :2017 Clause 18.3 Application it is suitable for the overload test with filament lamps for switches, supply 1.2 times rated current of ...

Brand Name:HongCe

Model Number:HT-I07

Place of Origin:China

IEC60884-1 Straight Unjointed Test Finger, Diameter 12mm, Protection Against Electric Shock Test During this additional test the accessories are subjected for 1 min to a force of 75 N, applied through the tip of a straight unjointed test finger, test probe...

Model Number:HT250-1

... connectors. The tester pin and socket tips are aluminum. All tips are replaceable. A nylon hand protector is provided with each tool. Features of Aviation Parts: Brand: Daniels Manuf Corp For Use With: Pins or Sockets (AWG 12, 16, 20, 22, 23) Type:

Model Number:HT250-1

... connectors. The tester pin and socket tips are aluminum. All tips are replaceable. A nylon hand protector is provided with each tool. Features of Aviation Parts: Brand: Daniels Manuf Corp For Use With: Pins or Sockets (AWG 12, 16, 20, 22, 23) Type:

Brand Name:Pego Electronics

Model Number:PG-FVA

Place of Origin:China

Plug Pins Fixation Verifying Test Apparatus for Torque and Pull Force Tests on Pins 1. Introduction The plug pins fixation verifying test apparatus is designed according to IEC60335-1 clause 22.3 and IEC60065 clause 15.4.3 (b and c) , it can perform both ...

Brand Name:Pego Electronics

Model Number:PG-FVA884

Place of Origin:China

IEC60884-1 Figure 30 Plug Pins Fixation Verifying Test Apparatus (by a Pull Force) 1. Introduction The apparatus is designed according to IEC60884-1:2013 figure 30 and clause 24.10 for verifying the fixation of pins in the body of the plug. The apparatus...

Brand Name:Pego Electronics

Model Number:PG-AHR

Place of Origin:China

IEC 60884-1 Figure 40 Apparatus for Testing Resistance to Abnormal Heat of Insulating Sleeves of Plug Pins 1. Introduction Apparatus for testing resistance to abnormal heat of insulating sleeves is designed according to IEC6884-1 figure 40 and clause 28...

Brand Name:Pego Electronics

Model Number:PG-PTA

Place of Origin:China

IEC 60884-1 Figure 41 Apparatus for Pressure Test at High Temperature for Testing Pin-Insulating Sleeves 1. Introduction The high temperature pressure test apparatus conforms to the standard of IEC60884-1 clause 30.1 figure 41, IEC60598-2-20 clause 20.15, ...

Brand Name:Pego Electronics

Model Number:PG-DFA

Place of Origin:China

IEC60884-1 Figure 12 Test Apparatus for Deflection on Screwless Terminals 1. Introduction The test apparatus for deflection on screwless terminals is to meet the test requirements of IEC60884-1 clause 12.3.12 and figure 12 for conducting deflection test...

Brand Name:Pego Electronics

Model Number:PG-AHR

Place of Origin:China

IEC60884-1 figure 40 Apparatus for Testing Resistance to Abnormal Heat of Insulating Sleeves of Plug Pins 1. Introduction Apparatus for testing resistance to abnormal heat of insulating sleeves is designed according to IEC6884-1 figure 40 and clause 28...

Brand Name:Pego Electronics

Model Number:PG-GPA

Place of Origin:China

IEC60884-1 Annex C Test Apparatus for Plug Gripping Test 1. Introduction The test apparatus for plug gripping test is designed to meet the test requirements of IEC60884-1:2013 annex C. The test apparatus consists of a force gauge with a means to securely ...

Brand Name:Pego Electronics

Model Number:PG-ATA

Place of Origin:China

IEC60884-1 figure 28 Apparatus for Abrasion Test on Insulating Sleeves of Plug Pin 1. Introduction Apparatus for abrasion test on insulating sleeve of plug pin is designed according to IEC60884-1 figure 28 and BS1363 figure 9, it is applied to test ...

Brand Name:Pego Electronics

Model Number:PG-WDFA2

Place of Origin:China

IEC60320-1 Appliance Couplers Maximum and Minimum Withdrawal Force Testing Equipment / Apparatus for Checking Withdrawal Force of Appliance Couplers 1. Introduction he appliance couplers withdrawal force testing equipment is designed according to IEC60320...

Brand Name:Sinuo

Model Number:SN2111

Place of Origin:China

IEC 60884-1 Figure 11 Conductors Undue Damage Checking Test Apparatus Standard: IEC60884-1 clause 12.2.5, figure 11. Application: It is used to check terminals with screw clamping shall be so designed and constructed that they clamp the conductor...