smoke density sensor

Brand Name:HOOHA

Place of Origin:China

...Smoke Density Tester Part 1 Three Cube Meter 3m3 Cable Introduction: 3 Meter Smoke Density Tester is the testing equipment measuring the smoke generated when the cable or optical cable is placed horizontally and burn under definite fire resource in the specified condition (3m3 chamber required by IEC61034). This equipment is important to measure the smoke generation from the value of light source penetration through the smoke

Brand Name:HOOHA

Place of Origin:China

... the box body is in the open fire, Smoke density test chamber can measure the smoke density. This instrument is suitable for E ASTM 662, BS6401, ISO5659, NES 711, NEPA258 and other standards. This test is more and more used for the internal material of

Brand Name:YUYANG

Model Number:YY714

Place of Origin:China

... that measures smoke from burning materials. The unit can be fitted to several instruments such as the Room Corner Test, (ISO 9705), Single Burning Item (SBI), (EN ...

Brand Name:YUYANG

Model Number:YYF011

Place of Origin:China

... D2843 Smoke Density Tester For Building Materials 0 ~ 100% Application: It is applicable to the determination of static smoke content when building materials and its products are burned. It can also be used for the determination of static smoke content...

Brand Name:vouch

Model Number:5920

Place of Origin:CHINA

... Smoke Density Test Apparatus , Ftt Fire Testing Nbs Smoke Chamber Standard ISO5659-2 Test Result: • Laboratory Information • User’s CI • Specimen Conditions • Time from start of test, t(s) • Transmission(%) and specific optical density, Ds...

Brand Name:YUYANG

Model Number:YY712

Place of Origin:China

Laboratory Smoke Density Tester for Industrial Material Noxious Gas Analysis Introduction: The smoke toxicity test apparatus of the material is heated by heating to release harmful gas and then observe the reaction of the mice to carry out the test. This ...

Brand Name:ZL

Model Number:ZL-1049

Place of Origin:China

ASTM E662 Burning Smoke Density test Chamber / Materials Smoke Density Testing Machine Temperature Measuring Device: A temperature sensor is installed on the inner surface of the door at a height of 1.5M from the ground and 0.5M from the wall. Monitor the ...

Brand Name:GOLD

Model Number:GD-ISO 5659

Place of Origin:China

...Smoke Density Chamber ASTM E662 Flammability Tester ISO 5659 NBS Plastic Smoke Density Chamber Product Introduction: The test method of the NBS smoke density test box originated from the National Institute of Standards and Technology (NIST, formerly NBS) and is now widely used in multiple testing fields. This test method is suitable for evaluating the smoke density...

Brand Name:YUYANG

Model Number:YY703

Place of Origin:China

...Smoke Generation Optical Density Tester Description: ISO 5659-2 Plastics Smoke Generation Optical Density Test Apparatus by Single Chamber Test is widely used in assessing characteristics of vehicle interior and inflammable cable. Measure the optical density of smoke...

Brand Name:YUYANG

Model Number:YY702

Place of Origin:China

Micro-computer Plastic Burning or Decomposition Smoke Density Tester Application: The test apparatus is used for measuring the somke-producing characteristic of plastics under controlled condition of combustion or decomposition, and also can be used for ...

Brand Name:HOOHA

Place of Origin:China

GB / T 20285 - 2006 Laboratory Smoke Density Tester Industrial Noxious Gas Analysis Introduction: The smoke toxicity test apparatus of the material is heated by heating to release harmful gas and then observe the reaction of the mice to carry out the test...

Brand Name:HOOHA

Model Number:ZY6282-GBJ

Place of Origin:China

ZY6282-GBJ Testing The Smoke Density Toxicity Index Test Box Standard: Compliance with GJB1916-1994 standard requirements for the test of toxic index in section 4.5.37 of the general specification for low-smoke cable and soft line of ships. Scope of ...

Brand Name:HAIDA

Model Number:HD-R909

Place of Origin:Guangdong, China (Mainland)

... products. It evaluates the density of smoke by measuring the loss of light flux in the test chamber, thereby helping to evaluate the combustion performance of the material. Technical Parameters Model HD-R909 Measuring range 0.0001-100%; (Smoke density)

Model Number:MP-2

...Smoke Gas Sensor Good Sensitivity To LPG Smoke In Wide Range Small Size For Domestic Smoke Leakage Alarm Industrial Smoke Gas Alarm And Portable Smoke Detector MP-2 model with advanced planar construction is comprised of heater and metal oxide semiconductor material of subminiature Al2O3 ceramic plate, fetch out electrode down-lead, encapsulation in metal base and cap. When the target gas exists , the sensor...

Brand Name:HOOHA

Model Number:ZY6014J-BS

Place of Origin:China

ZY6014J - BS Smoke Density Tester For Fire- Resistant Cable Line Integrity Combustion Scope of application: It is suitable for fire resistant cable with no more than 600/1000v and 20mm in diameter, and whether the line integrity is maintained under fire ...

Brand Name:VOUCH

Model Number:5910

Place of Origin:CHINA

Vertical Smoke Density Measurement Unit Fire Chimney Test Standard ASTM D2843 Feature: advanced industrial appearance and control design, consider the ...

Brand Name:vouch

Model Number:5920

Place of Origin:China

Wire Cable Smoke Density Test Apparatus , NBS Chamber Fire Propagation Test Laboratory Testing Suzhou Yangyi Vouch Testing Technology Co.,ltd is a professional ...

Brand Name:YUYANG

Model Number:YY907

Place of Origin:China

...Smoke Density Tester Application: Limited Oxygen Index with Smoke Density Tester is designed according to ISO4589.1-2006, it applies to analysis the minimum oxygen concentration needed to maintain combustion of the sample when the sample is under the test conditions specified in oxygen and nitrogen mixed gas; This tester is installed with England imported oxygen sensor...

Brand Name:YUYANG

Model Number:YYC012

Place of Origin:CHINA

... and cables Test index: Optical density(OD) and specific optical density(DS) of the smoke Measuring principle: Lambert-beer Law Measuring method: Measure the smoke light transmission percent of original light transmission to represent smoke density, and

Brand Name:Haida

Model Number:HD-R909

Place of Origin:China

... products. It evaluates the density of smoke by measuring the loss of light flux in the test chamber, thereby helping to evaluate the combustion performance of the material. Technical Parameters Model HD-R909 Measuring range 0.0001-100%; (Smoke density)