sample test

Place of Origin:China

Brand Name:GC

Model Number:GC-QK-E

...Sample Impact Notch Machine Product Description Model: GC-QK-E Product introduction The plastic electric notch prototype machine(BST-QK-D) is a sample making equipment used in the impact toughness test of non-metallic materials by IZOD and simply supported beam impact testing machine. Laboratories of scientific research institutions, colleges and universities, non-metallic materials manufacturers and other units to make notched samples

Brand Name:GC

Model Number:GC-QK-A

Place of Origin:China

...Sample Impact Notch Machine Product Description Model: GC-QK-A Product introduction The plastic electric notch prototype machine(BST-QK-D) is a sample making equipment used in the impact toughness test of non-metallic materials by IZOD and simply supported beam impact testing machine. Laboratories of scientific research institutions, colleges and universities, non-metallic materials manufacturers and other units to make notched samples

Brand Name:Sinuo

Model Number:SN889-512L

Place of Origin:China

...Testing Constant Temperature Test Chamber IEC60068-2-2 512L Complied Standards & Clauses It conforms to standards: IEC60068-2-2:2007 “Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT” Equipment Overview Specimen Limitations: This test equipment prohibits: 1.Testing or storage of flammable, explosive and volatile substance samples 2.Testing or storage of corrosive substance samples 3.Testing...

Brand Name:PERFECT

Model Number:PT-6030

Place of Origin:China

...adhesive tape test sample cohere on tilt plate and the viscous face up, the tilt plate with 30° angle, taken sequentially from the largest to the smallest steel ball make the ball rolling on the sample free, and recording adhesive on the sample more than

Brand Name:Btutest

Model Number:BTU-LCSS

Place of Origin:Made in China

... very sturdily constructed with cadmium coated plated for rust protection. It is designed for the reduction of test sample which are too large in volume. It handles any material from size up to 108 mm. Each chute bar is 1/2" wide. The opening start from 1

Brand Name:ZL

Model Number:ZL-2701

Place of Origin:China

...Samples Voltage Tester for Corona-Resistant Magnet Wire It can test three samples at the same time. Applying voltage to the three samples at the same time, and it will time them respectively. • Voltage output can be set. • Frequency output can be set. • It displays voltage,frequency,rising time and testing time. • It has operating instructions and cut-through instruction. • Test results of the three samples...

Model Number:LR-A008

Place of Origin:China

Brand Name:Lonroy

.../T1043-93,GB/T1843-1996. 2.Specifications Knife stroke 24mm Knife-entering max speed 4mm/min Sample mode 1

Brand Name:LONROY

Place of Origin:Guangdong, China

Model Number:LR-A009

... to do non metal material impact toughness test with notched specimen preparation equipment, notched impact of prototype equipment can be for scientific research institutes, tertiary institutions, non metal ...

Brand Name:HongCe

Model Number:SBD-2

Place of Origin:China

.... Choose the corresponding steel ball according to related standard requirements, then adjust it to be a certain height, and then make it fall freely to impact the test sample. After that, judge the quality of the test sample according to the

Brand Name:SKYLINE

Model Number:SL-L17

Place of Origin:CN

...relative to each other.When the two fixtures are close, the sample bends. During the test, the fixture moves at a uniform speed, and the sample repeatedly bends. Observe the damage of the sample. Product information To primarily intended to determine the

Brand Name:DAXIAN

Model Number:DX8616A

Place of Origin:China

...samples via a gas radiant plate and calibrate with a heat flow meter. Test sample is placed in a vertical position, near the radiation plate, exposed in a clear area calibrated radiation flux. Close to the pilot flame is assembled with the test sample, but not in contact with the test sample

Brand Name:INVBIO

Model Number:card

Place of Origin:China

... drops of sample into the sample well of the cassette. 3.Read results within 15 minutes. Do not read results after 20 minutes. INTERPRETATION OF RESULTS Negative: Only one pink band appears on test region of the Cassette. This indicates that there is no

Brand Name:SKYLINE

Model Number:SL-C50A

Place of Origin:Dongguan, China

... cut the sample of given size, and is an ideal auxiliary appliance for departments of production, scientific research and quality supervision and inspection of corrugated boards and cartons. Test Standards BS EN ISO 3037 ISO 3037, Fefco T8, Tappi T

Brand Name:ZL

Model Number:ZL-3040

Place of Origin:China

...Sample Cutting Machine For Izod Charpy Impact Test Product Overview The plastic electric notch sample making machine is specialized equipment for preparing notched samples used in impact toughness testing of non-metallic materials. This precision instrument is designed for use with cantilever beam and simply supported beam impact testing...

Brand Name:Lonroy

Model Number:LR-A174

Place of Origin:China

... that are not suitable for cutting into 16mm abrasion test samples for the heel and upper surface. Usage Grind and prepare the samples for the face abrasion test. Meet the standards GB/T 9867-2008, ISO 4649:2002 "Determination of abrasion resistance of

Brand Name:DAXIAN

Model Number:DX8616A

Place of Origin:China

...samples via a gas radiant plate and calibrate with a heat flow meter. Test sample is placed in a vertical position, near the radiation plate, exposed in a clear area calibrated radiation flux. Close to the pilot flame is assembled with the test sample, but not in contact with the test sample

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-B617-S

...plastic films, leather, rubber & plastic, paper, fiber, etc. Different test with different grips: tensile, peel, tear, heat seal, adhesive, bend and open force. Deformation under defined load: Test deformation under defined load of tested sample Load under

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-P307

...Testing Machine , Abrasion Resistance Test Machine Product Description: Rubber DIN Abrasion Test Machine is used to test abrasion resistance of elastic material, rubber, tire, conveyor belt, solo, soft synthetic leather and other materials. Principle Under specified touched pressure and given area, when the sample and the abrasive paper get an angle, testthe abrasion resistance of the sample...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-B617-S

...Testing Machines/Compressive Tensile Strength Tester QB/T 1053 Application: Tested sample: plastic films, laminated materials, adhesive tapes, adhesive bandage (plaster), release paper, plastic films, leather, rubber & plastic, paper, fiber, etc. Different test with different grips: tensile, peel, tear, heat seal, adhesive, bend and open force. Deformation under defined load: Test deformation under defined load of tested sample

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-C524-1

...Testing Machine TEM Adhesion Tape Retentively testing Parameters: Thickness of the sample 1.5~2.0 mm, Width 40~50 mm, Length 60~125 mm Roller 2 000 g±50 g Load panel+ weight+ connect rod 100g±10g Sample size 5mm×100mm Counter 10 groups,99999.9 hours Steel testing panel 10 pieces Steel loading panel 10 pieces Outer size (L×W×H) 1060×250×650 mm Weight 65kg Accessories Outer material: advanced coating + aluminum alloy Testing...