rf components

Brand Name:Texas Instruments

Model Number:CC1310F128RGZR

Place of Origin:China

...™ Package Tape & Reel (TR) Product Status Active Digi-Key Programmable Not Verified Type TxRx + MCU RF Family/Standard General ISM < 1GHz Protocol - Modulation DSSS, GFSK Frequency 300MHz ~ 930MHz Data Rate (Max) ...

Place of Origin:Jiangsu, China

Brand Name:HZ

Model Number:HZ 1.2m

... components that are tied to a true ground. The EMI/RFID shielding cans or lids are the last resort and can always be relied on if the circuit design cannot take care of the EMI/RFI noise. A ...

Brand Name:SHINHOM

Model Number:Waveguide Components

Place of Origin:China

...components are essential passive microwave devices used to guide electromagnetic waves with minimal loss and high reliability. Thanks to their inherent advantages — low insertion loss, high power handling, and excellent frequency response — they are widely applied in RF...

Brand Name:Analog Devices /Linear Technology

Model Number:LT1521CS8#PBF LT1521IST-3#PBF LT1521CST-3#PBF LT1521CS8-5#PBF LT1521CST-5#PBF LT1521CS8-5#TRPBF LT1521CS8-3.3#TRPBF LT1521IS8-3.3#TRPBF LT1521IST-3.3#TRPBF LT1521CMS8-3.3#TRPBF

...RF Amplifier IC LT1521 Surface Mount IC Electronics Components LT1521CS8#PBF LT1521IST-3#PBF LT1521CST-3#PBF LT1521CS8-5#PBF LT1521CST-5#PBF LT1521CS8-5#TRPBF integrated components LT1521CS8#PBF LT1521IST-3#PBF LT1521CST-3#PBF LT1521CS8-5#PBF LT1521CST-5#PBF LT1521CS8-5#TRPBF integrated components IC RF...

Brand Name:CP

Place of Origin:CHINA

DWDM Integrated device test system A DWDM system generally consists of five components: Optical Transmitters/Receivers, DWDM Mux/DeMux Filters, Optical Add/Drop Multiplexers (OADMs), Optical Amplifiers, Transponders (Wavelength Converters). Optical Power ...

Brand Name:Luowave

Model Number:LFTX/ LFRX-LW

Place of Origin:China

RF Daughterboards LFTX/ LFRX-LW Product introduction: The LFRX daughter board uses two high-speed operational amplifiers, and the operating frequency is 0-30MHz. Products are usually used to down-convert external RF front-end signals to their operating frequency range. With proper components, LFRX can also operate USRP in the HF band. The board has no adjustable components...

Brand Name:SHINHOM

Model Number:RF terminations and attenuators

Place of Origin:China

... support broadband frequency ranges and offer low VSWR, high power handling, and minimal signal distortion. These components are ideal for laboratory testing, wireless communication systems, radar, and aerospace applications. Available in standard and

Brand Name:SHINHOM

Model Number:LTCC Filters

Place of Origin:China

...RF and microwave filtering components built using advanced multilayer ceramic technology. By co-firing ceramic with conductive materials at low temperatures, LTCC filters achieve compact size, low insertion loss, high attenuation, and excellent temperature stability — making them ideal for size-constrained and high-performance RF...

Brand Name:SHINHOM

Model Number:Bi-Directional Couplers

Place of Origin:China

Overview Our Bi-Directional Couplers are precision RF passive components designed to enable accurate sampling of both forward and reflected signals in RF and microwave systems. These couplers allow simultaneous measurement of incident and reflected power, ...

Model Number:customized

Brand Name:KAIYAN

Place of Origin:CHINA

... components from electromagnetic and radio frequency interference. Made from high-quality nickel silver alloy (Cu-Ni-Zn), this RF shield offers a balanced combination of electrical conductivity, mechanical strength, and corrosion resistance, making it an

Brand Name:Omron Electronics Inc-EMC Div

Model Number:G6K-2F-RF DC5

Place of Origin:China

...distributed by Stjk. As one of the leading distributors of electronic products, we carry many electronic components from the world's top manufacturers. For more information on G6K-2F-RF DC5 detailed specifications, quotations, lead times, payment terms and

Model Number:HZ-150SN

Place of Origin:China

Brand Name:N/A

... is improperly shielded from EMI, it will not work. EMI can be the result of man made or natural occurrences. In order to protect electronic devices and components from electromagnetic radiation, all electronics must be shielded. EMI shielding is used to

Brand Name:Sinoscite

Model Number:SNSD

Place of Origin:Sichuan, China

Passive Components Available CDMA DCS GSM WCDMA Duplexer RF Cavity Duplexer Quick Details Place of Origin:Sichuan, China Brand Name:rf cavity Duplexer Model Number:rf cavity Duplexer Product name:Available CDMA DCS GSM WCDMA Duplexer rf cavity wireless ...

Brand Name:Terui

Model Number:SMA-50JR

Place of Origin:China

RF Coaxial Terminations SMA RF Termination Load is a threaded RF coaxial connector with an outer conductor inner diameter of 4.13 mm (0.163 inch) and a characteristic impedance of 50 Ω. It is usually considered to be a component mounted on the cable or installed on the instrument, as a transmission line electrical connection or separation of the components, mainly as a bridge. SMA interface standard: SMA RF...

Brand Name:Terui

Model Number:SMA-50KR

Place of Origin:China

RF Coaxial Terminations SMA RF Termination Load is a threaded RF coaxial connector with an outer conductor inner diameter of 4.13 mm (0.163 inch) and a characteristic impedance of 50 Ω. It is usually considered to be a component mounted on the cable or installed on the instrument, as a transmission line electrical connection or separation of the components, mainly as a bridge. SMA interface standard: SMA RF...

Brand Name:Terui

Model Number:QSMA-50JR-1W

Place of Origin:China

RF Coaxial Terminations SMA RF Termination Load is a threaded RF coaxial connector with an outer conductor inner diameter of 4.13 mm (0.163 inch) and a characteristic impedance of 50 Ω. It is usually considered to be a component mounted on the cable or installed on the instrument, as a transmission line electrical connection or separation of the components, mainly as a bridge. SMA interface standard: SMA RF...

Brand Name:Terui

Model Number:BMA-JR-0.5

Place of Origin:China

RF Coaxial Terminations SMA RF Termination Load is a threaded RF coaxial connector with an outer conductor inner diameter of 4.13 mm (0.163 inch) and a characteristic impedance of 50 Ω. It is usually considered to be a component mounted on the cable or installed on the instrument, as a transmission line electrical connection or separation of the components, mainly as a bridge. SMA interface standard: SMA RF...

Brand Name:Terui

Model Number:2.92-50JRCG

Place of Origin:China

RF Coaxial Terminations SMA RF Termination Load is a threaded RF coaxial connector with an outer conductor inner diameter of 4.13 mm (0.163 inch) and a characteristic impedance of 50 Ω. It is usually considered to be a component mounted on the cable or installed on the instrument, as a transmission line electrical connection or separation of the components, mainly as a bridge. SMA interface standard: SMA RF...

Brand Name:Terui

Model Number:SMA-50JR-5W

Place of Origin:China

RF Coaxial Terminations SMA RF Termination Load is a threaded RF coaxial connector with an outer conductor inner diameter of 4.13 mm (0.163 inch) and a characteristic impedance of 50 Ω. It is usually considered to be a component mounted on the cable or installed on the instrument, as a transmission line electrical connection or separation of the components, mainly as a bridge. SMA interface standard: SMA RF...

Brand Name:Terui

Model Number:N-50JR-4-50

Place of Origin:China

RF Coaxial Terminations SMA RF Termination Load is a threaded RF coaxial connector with an outer conductor inner diameter of 4.13 mm (0.163 inch) and a characteristic impedance of 50 Ω. It is usually considered to be a component mounted on the cable or installed on the instrument, as a transmission line electrical connection or separation of the components, mainly as a bridge. SMA interface standard: SMA RF...