plug force test

Brand Name:kingpo

Place of Origin:china

...plug and socket gauge Figure number Project name Number DIN-VDE0620-1-Lehre1 Socket R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum pull out force of contact jack 2 DIN-VDE0620-1-Lehre3 Bipolar plug force 1 DIN-VDE0620-1-Lehre4 Bipolar plug with earthing contact insertion flanking force 1 DIN-VDE0620-1-Lehre5 To test...

Brand Name:kingpo

Model Number:Bild 16

Place of Origin:china

... R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum pull out force of contact jack 2 DIN-VDE0620-1-Lehre3 Bipolar plug force 1 DIN-VDE0620-1-Lehre4 Bipolar plug with earthing contact insertion flanking force 1 DIN-VDE0620-1

Brand Name:kingpo

Model Number:KP-CG97

Place of Origin:china

...​: This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque. It is designed and manufactured according to IEC62196-1: 2020 clause 25.3 Figure 17 and

Brand Name:SKYLINE

Model Number:SL-PL31

Place of Origin:China

...Force Test Machine Product introduction Insertion Force Testing Machine is suitable for connectors insertion and withdrawal force tests, the use of unique device automatically matched to find the heart of a variety of special fixture connector, the plug can be completely accurate force results. All the testing informations are setting by the computer and it can automatically store testing condition,test...

Brand Name:HongCe

Model Number:MF-1

Place of Origin:China

... details: This plug pin force verification tester is designed to meet the exacting requirements of major international standards such as IEC 60884-1 Fig 18 and Fig 19. It is used to test whether the maximum force of pulling the plug from the socket and the

Brand Name:Pego Tester

Model Number:PG-PIT

Place of Origin:China

Plug Torque Test Device (plug-in Test Apparatus) 1. Introduction Plug torque test device is designed according to IEC60065 figure 11, it is applied to check the socket outlet mechanical strength of direct plug-in equipment. 2. Specification ● Distance between contact surface and axis surface: 8mm ● Force arm: 0-200mm ● Weights: 1 piece of 2.5N, 1 piece of 1N ● Configuration: 1 piece of all-purpose plug (apply to GB and BS plugs...

Brand Name:kingpo

Place of Origin:china

...plug and socket gauge Figure number Project name Number DIN-VDE0620-1-Lehre1 Socket R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum pull out force of contact jack 2 DIN-VDE0620-1-Lehre3 Bipolar plug force 1 DIN-VDE0620-1-Lehre4 Bipolar plug with earthing contact insertion flanking force 1 DIN-VDE0620-1-Lehre5 To test...

Brand Name:ZONSKY

Model Number:ZY6007

Place of Origin:DONGGUAN CHINA

.... Mainly used for detecting the plug is pulled out the maximum force and unipolar bolt from the plug bush assembly pull out the required minimum force. Main to test diode triode 10A, 10A and 16A test, 16A test and 10A pin plug. The test device has the

Brand Name:ZL

Model Number:ZL-2809

Place of Origin:China

...Force Mobile Phone Test Equipment Application: Connector Push Pull Strength Test Equipment used in various kinds of connectors for plug in and plug out force test, equip with automatic device for adjustment centre site and special grips so that it can get the precision insert force; Adopt Chinese Windows version software frames setting which is easy for operation and can storage for test data's (test...

Brand Name:kingpo

Model Number:DIN VDE 0620-2-1 :2021-Bild 16a

Place of Origin:china

...Test plug for temperature rise According to DIN VDE 0620-2-1 (VDE 0620-2-1):2021-Bild 16a DIN-VDE0620-1 plug and socket gauge Figure number Project name Number DIN-VDE0620-1-Lehre1 Socket R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum pull out force of contact jack 2 DIN-VDE0620-1-Lehre3 Bipolar plug force 1 DIN-VDE0620-1-Lehre4 Bipolar plug...

Brand Name:kingpo

Place of Origin:china

Model Number:AS/NZS 3112:2011 Clause 2.13.7.2

... plugs not subjected to any previous tests shall be tested as follows: Pins of assembled plugs shall be tested by clamping the plug in a rigid holding block and applying a bending force, as shown in Figure 2.8, to the pin under test. The pins shall be

Brand Name:kingpo

Place of Origin:china

...plug and socket gauge Figure number Project name Number DIN-VDE0620-1-Lehre1 Socket R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum pull out force of contact jack 2 DIN-VDE0620-1-Lehre3 Bipolar plug force 1 DIN-VDE0620-1-Lehre4 Bipolar plug with earthing contact insertion flanking force 1 DIN-VDE0620-1-Lehre5 To test...

Brand Name:Infinity Machine

Model Number:IF5112

Place of Origin:Made In China

... Force Tester Model:IF5112 Application: This equipment is used to test the plug-in and pull-out force and pressing force of USB interfaces of various electronic products. The results of the friction force and applied force pressing test during plug-in and...

Brand Name:kingpo

Model Number:KP-BCL03

Place of Origin:china

...Force Plug Socket Tester Apparatus Product details: This Tester is designed to meet the exacting requirements of major international standards such as IEC 60884-1 Fig 18 and Fig 19. It is used to test whether the maximum force of pulling the plug from the socket and the minimum force of pulling the single plug pin from the plug...

Brand Name:kingpo

Place of Origin:china

...plug and socket gauge Figure number Project name Number DIN-VDE0620-1-Lehre1 Socket R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum pull out force of contact jack 2 DIN-VDE0620-1-Lehre3 Bipolar plug force 1 DIN-VDE0620-1-Lehre4 Bipolar plug with earthing contact insertion flanking force 1 DIN-VDE0620-1-Lehre5 To test...

Brand Name:kingpo

Place of Origin:china

...plug and socket gauge Figure number Project name Number DIN-VDE0620-1-Lehre1 Socket R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum pull out force of contact jack 2 DIN-VDE0620-1-Lehre3 Bipolar plug force 1 DIN-VDE0620-1-Lehre4 Bipolar plug with earthing contact insertion flanking force 1 DIN-VDE0620-1-Lehre5 To test...

Brand Name:kingpo

Place of Origin:china

...plug and socket gauge Figure number Project name Number DIN-VDE0620-1-Lehre1 Socket R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum pull out force of contact jack 2 DIN-VDE0620-1-Lehre3 Bipolar plug force 1 DIN-VDE0620-1-Lehre4 Bipolar plug with earthing contact insertion flanking force 1 DIN-VDE0620-1-Lehre5 To test...

Brand Name:kingpo

Place of Origin:china

...plug and socket gauge Figure number Project name Number DIN-VDE0620-1-Lehre1 Socket R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum pull out force of contact jack 2 DIN-VDE0620-1-Lehre3 Bipolar plug force 1 DIN-VDE0620-1-Lehre4 Bipolar plug with earthing contact insertion flanking force 1 DIN-VDE0620-1-Lehre5 To test...

Brand Name:Sinuo

Model Number:SNQC1007

Place of Origin:China

...​: This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque. It is designed and manufactured according to IEC62196-1: 2020 clause 25.3 Figure 17 and