plc plug socket tester

Brand Name:kingpo

Place of Origin:china

IEC60884clause 12.14 testing equipment of Lateral Strain for socket-outlets with 5N weight​ Standard: IEC 60884-1 2013 clause 13.14 figure 13 Application: This device is use to check whether any damage to the socket-outlets ratings up to 16A and 250V whe...

Brand Name:kingpo

Model Number:KP-BCL04

Place of Origin:china

... It is suitable for checking the maximum force required to pull the plug out of the socket and the single pole pin pulled out from the socket assembly. Whether the minimum force required is within the range specified by the standard. Parameter: Standard

Place of Origin:China

Brand Name:KeRang

... for 10,000 flexing at a rate of 60 flexing per minute. Six cables or cords fitted with plugs can be tested simultaneously. The cables are connected to a socket and the tail of the cable is connected to the tester to detect if an internal fault occurs with

Brand Name:HongCe

Model Number:HC9906

Place of Origin:China

IEC60884clause 12.14 testing equipment of Lateral Strain for socket-outlets with 5N weight​ Standard: IEC 60884-1 2013 clause 13.14 figure 13 Application: This device is use to check whether any damage to the socket-outlets ratings up to 16A and 250V whe...

Brand Name:HongCe

Model Number:HC9910A

Place of Origin:Chnia

... requirements clause 19 and figure 44. Application: It is mainly used to test the plug device and its accessories around, such as dimmers, fuses, switches, power regulators, etc., and it cannot reach excessive temperatures during normal use. Test sample:

Brand Name:HongCe

Model Number:HC9906

Place of Origin:China

IEC60884clause 12.14 testing equipment of Lateral Strain for socket-outlets with 5N weight​ Standard: IEC 60884-1 2013 clause 13.14 figure 13 Application: This device is use to check whether any damage to the socket-outlets ratings up to 16A and 250V whe...

Place of Origin:China

Brand Name:HongCe

Model Number:FP-1

Apparatus To Verify The Fixation Of Pins In The Body Of The Plug Product details: This device conforms to the standard of IEC 60884-1 Fig30. It is used for testing the firmness of the plug and the plug pin. The plug is placed on a rigid steel plate ...

Place of Origin:China

Brand Name:KeRang

...Tester FCT-1 Product details: This tester conforms to IEC60884-1 clause 23.2.After testing cord retention. the flexible cable is subjected for 1 min to a torque as specified in the following table: Torque test values for cord anchorages Rating of plug or portable socket...

Brand Name:kingpo

Model Number:KP-CG95

Place of Origin:china

IEC 62196 Vehicle Drive Over Testing Apparatus For Charging Plug Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is ...

Place of Origin:China

Brand Name:HongCe

Model Number:LP-3

... and the normal operation lifespan test of the Switches for household and similar fixed-electrical installations. Besides, it is also applied in the test of breaking volume of plug and socket, and mechanical action of normal operation lifespan. This device

Brand Name:HongCe

Model Number:HC9914B

Place of Origin:China

...normal operation life test of household and similar fixed electrical installations, also suitable for plugs and sockets’ breaking capacity and normal operation life testing of the household and similar purposes. The test equipment simulates the switches,

Brand Name:HongCe

Model Number:HC9931

Place of Origin:China

IEC60884-1 clause 24.18 figure 35. Verification of groove hole and reverse taper gauge Standard: IEC 60884-1 'Plugs and socket-outlets for household and similar purposes – Part 1: General requirements' clause 24.18, figure 35. Application: It is used to ...

Brand Name:HongCe

Model Number:HO6508

Place of Origin:China

Performance Tester For Proximity Switches With Integrally Connected Cables Pull Force 160N Torque Test 0.1Nm (360°) Product Introduction The performance tester for proximity switches with integrally connected cables is special designed and manufactured as ...

Brand Name:kingpo

Model Number:IEC 60884-1-Figure 20

Place of Origin:china

IEC 60884-1-Figure 20 Clamping unit for solid pins, plug Temperature rise Conforms to IEC 60884-1-Figure 20,clause 19 It can be manufactured and produced according to plugs of different countries.

Brand Name:HongCe

Model Number:HC9902

Place of Origin:China

IEC60884 Clause 10.1 300N Plug Compression Mechanical Strength Test Equipment Product information: The specimens are subjected to a compression test as shown in figure 8, the temperature of the pressure plate, of the base and of the specimens being (23±2)...

Brand Name:KingPo

Place of Origin:China

...Plug Socket Tester For Dimensional Measurement VDE 0620 Germany Plug Socket Tester For Dimensional Measurement And Verification Of Plug Socket Of Household Appliance Product information: These measuring gauges confirm to the standard of VDE0620, which are used for the dimensional measurement and verification of the plug socket...

Place of Origin:China

Brand Name:HongCe

Model Number:SG-1

Screwed Glands Tester Product details: The device is used to check screwed glands, and conform to the IEC60598-1 clause 4.12.5. Screwed glands shall be fitted with a cylindrical metal rod having a diameter equal to the nearest whole number of millimetres...

Place of Origin:China

Brand Name:HongCe

Model Number:IN-1

Insulation Sleeves of Plug Pins Abrasion Test Apparatus Product details: The test apparatus is designed and manufactured according to the standard requirement of IEC884 Figure 28. It is used to test the abrasion resistance of the insulating bushing of the ...

Place of Origin:China

Brand Name:KeRang

Apparatus to verify the fixation of pins in the body of the plug FP-1 Product details: This device conforms to the standard of IEC 60884-1 Fig30. It is used for testing the firmness of the plug and the plug pin. The plug is placed on a rigid steel plate ...

Brand Name:KingPo

Place of Origin:China

... Plug Socket Tester GOST 7396.1-89 IEC 83-75 Group C Socket Measure Product information: This testing device conforms to GOST 7396.1-89 (IEC 83-75), Group C figure 1 and figure 2. The gauge in figure 1 is used for verify the interchangeability of plugs,