minimum withdrawal force testing equipment

Brand Name:Pego

Model Number:PG-WDFA2

Place of Origin:China

...-1 figure 3 and figure 4 and clause 16, for verification of the maximum and minimum withdrawal force of connector/appliance outlet. The minimum withdrawal force is verified by inserting the test pin gauge to each individual connector/appliance outlet. The

Brand Name:Sinuo

Model Number:SNQC1013A

Place of Origin:China

EV Charging Gun Connector Withdrawal Force Test Equipment IEC 62196-1 Equipment Overview The force of inserting the charging gun into the socket: vertically downward the charging gun, place the main weight required by the standard on the charging gun, and...

Brand Name:Sinuo

Model Number:SN2118A

Place of Origin:China

... 14.1.6, fig13, fig14, table 5.It is used to check the maximum force required when the plug is pulled out of the socket-outlet or connector. Technical parameters: 1. The frame is composed of a bottom plate, a column, a sample installation fixture, and a

Brand Name:SKYLINE

Model Number:SL-PL31

Place of Origin:China

...Force Test Machine Product introduction Insertion Force Testing Machine is suitable for connectors insertion and withdrawal force tests, the use of unique device automatically matched to find the heart of a variety of special fixture connector, the plug can be completely accurate force results. All the testing informations are setting by the computer and it can automatically store testing condition,test...

Brand Name:kingpo

Model Number:KP-BCL04

Place of Origin:china

...Withdrawal Force Test Apparatus Application: This device complies with the requirements of IEC60884 Figure 18/19, VDE0620, etc. It is suitable for checking the maximum force required to pull the plug out of the socket and the single pole pin pulled out from the socket assembly. Whether the minimum force...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-A534

...Testing Machines , Large Products Package Clamp Force Testing Equipment 1. Before placing the packaged product between platens, verify that the clamp force using the clamp indicator. The indicator should be placed between the axes of the platen articulation points approximately 1/2 way up the platens. 2. Each time the product is clamped, the force should be applied for a minimum...

Brand Name:AI

Model Number:AIC-61241

Place of Origin:CHINA

Minimum Ignition Temperature Testing Equipment Introduction Minimum Ignition Temperature Testing Equipment is a way of testing the sensitivity of the ignition that the dust cloud is in the heated environment. When a lot of dust is exposed in heating the air and the air temperature is high enough, it may lead to spontaneous combustion. This method can test the minimum...

Brand Name:KeJian

Model Number:KJ-1065C

Place of Origin:China

...Force Testing Equipment With 200KG,500KG Optional Capacity Uses KJ-1068 is used in the industry of siliceous material,solar energy panel,solar energy material,electric wire and electron.It can be used to test all kinds of physical properties of finished or semi-finished products.Choose different clamps,you can do the test of tensile,resist compression,bending, shear, peel, loop tack and fatigue force...

Brand Name:INFINITY

Model Number:IF5112

Place of Origin:MADE IN CHINA

0.5KN Dual-Station Insertion And Extraction Force Testing Machine For Plug And Pull Force Testing Insertion Extraction Force Test Machine IF5112 *, *::before, *::after {box-sizing: border-box;}* {margin: 0;}html, body {height: 100%;}body {line-height...

Brand Name:DAXIAN

Model Number:DX8347

Place of Origin:China

.... Test load: 50Kg. Unit switching: Kgf, Nf, Lbf. Test stroke: 0 ~ 60mm (without clamps). Test speed: 5~30 times/min adjustable. The machine can measure tensile, tearing, peeling, splicing resistance, etc. of various materials; resistance ...

Brand Name:Liyi

Model Number:LY-1065/LY-1068

Place of Origin:Guangdong, China

...Instrument Pulling Force Testing Equipment Tension Machine Product information This machine also known as a materials testing machine , it is applicable to testing tensile stress, compressive stress, shearing force, peeling force, and elongation of ...

Brand Name:SAMYON

Model Number:SY

Place of Origin:CN

SY-10T/20T/30T Anchorage Force Tester For Checking Strengthening Concrete Structure SY-10T/20T/30T Anchorage Force Tester Application: It is suitable for testing the anchorage force of several of anchor shank, rebar and expansion bolts, also the pull force...

Brand Name:YUYANG

Model Number:YYT012C

Place of Origin:China

... Toys Testing Equipment Electrical Sharp Edge Bite Force Tester Toys Testing Equipment Product information: It conforms to the stand requirement of 16CFR 1500.51, ASTM F963 and EN-71. It stimulates the children’s teeth which is used to test the inherit...

Place of Origin:China

Brand Name:KeRang

6 Medical forceps pinching force tester customization 5.7 inch (120 × 90) single color LCD touch screen and Chinese menu display are adopted. Nominal specification, classification, setting load, printing, testing, uplink, downlink, time, calibration. The ...

Brand Name:ruijia

Model Number:RJ-6512

Place of Origin:china

Hot sell Micro Load Cells half Bridge For Force Test equipment What is Micro Load Cell? Load cell is the heart of electronic weighing apparatus. As the rapid development of sensor technology, electronic weighing ...

Brand Name:MIYU

Model Number:MY-NQ-DL

Place of Origin:China

High quality Torsion Test for Tablet PC ( MY-NQ-DL) with competitive price, customized design is acceptable. Description This Torsion tester is widely used for all kinds of Electronics, Aerospace, Communication electronics, Auto parts, New energy batteries...

Brand Name:SHC

Model Number:SC-BC02

Place of Origin:China

... pulled out from the socket assembly. Whether the minimum force required is within the range specified by the standard. Parameter: 1. Standard one-pole 10A, three-pole 10A and 16A test standard plugs each, 10A 16A test standard plugs each, adjustable: 1)

Place of Origin:China

Brand Name:HongCe

Model Number:KP-1

Kettle Insert-withdraw Endurance Test Device Product information: The kettle insert-withdraw endurance test device is designed and manufactured according to the standard IEC60335 -2- 15 which is used to test the cordless kettle plug life. Test principle...

Brand Name:Kinte

Model Number:WH-8818CY

Place of Origin:Guangdong,China (Mainland)

... force and pull-out test, with the patented design of the automatic seeking heart device, will be fully accurate plug test, The main parameters: 1, the determination of the maximum load: 50,20,5,2 kg 2, the minimum decomposition: 0.01kg or 1g 3, the