mini module fiber optic plc splitter

Brand Name:yingda

Model Number:YDPLC-LGX-208LU

Place of Origin:china

The LGX Optical Splitter is a high-performance fiber optic splitter specifically designed to meet the demanding requirements of the Russian market. Engineered to operate in extreme conditions, this splitter can withstand temperatures as low as -50°C, ...

Brand Name:DAWNERGY

Model Number:DA-PLC-1XN-900-NC-M

Place of Origin:CHINA

... waveguide technology. It has small size, high reliability, wide operating wavelength range. It is widely used in PON networks and realizes optical signal power splitting. Features: Low insertion loss Low PDL Good channel uniformity High-reliability and

Brand Name:DAWNERGY

Model Number:DA-PLC-1(2)XN-SCA-M

Place of Origin:CHINA

... waveguide technology. It has small size, high reliability, wide operating wavelength range. It is widely used in PON networks and realizes optical signal power splitting. Features: Low insertion loss Low PDL Good channel uniformity High-reliability and

Brand Name:New Light

Model Number:Mini Type

Place of Origin:China

... inputs and multiple outputs. Especially suitable for connecting central office and terminal in passive optical network (EPON, GPON, BPON, etc.). The device also implements the splitting of the optical signal.Box splitter is designed to be installed in a

Brand Name:KEXINT

Model Number:PLC-1*2-SC/APC

Place of Origin:SHENZHEN

... power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations. MINI type PLC splitter has stronger fiber protection than bare fiber splitter,

Brand Name:KEXINT

Model Number:PLC-1*4-SC/APC

Place of Origin:SHENZHEN

... management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations. MINI type PLC splitter has stronger fiber protection than bare fiber splitter, which is

Brand Name:YINGDA

Model Number:1x32 plc splitter

Place of Origin:china

...Optical splitter divides light from a single fiber into two or more fiber channels. Fiber PLC splitter Sepcification: Parameter Sepcification Operating Wavelength(nm) 1260~1620 Type 1*2 1*4 1*8 1*16 2*4 2*8 2*16 1*32 2*32 1*64 2*64 ...

Brand Name:YINGDA

Model Number:1x32 plc splitter

Place of Origin:china

...type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations. With the features of small size, wide range of operating wavelength,

Brand Name:Seacent

Model Number:1x64 mini module

Place of Origin:Guangdong , China

Fiber Optic PLC Splitter mini module 1x64 with SC/APC connector Fiber optic PLC splitter is a low cost fiber distribution solution in passive optical networks. PLC splitter design is based on planar waveguide circuit technology, and the key component PLC splitter chip offers high optical performance. The splitting ratios of PLC splitters...

Brand Name:KEXINT

Model Number:PLC-1*8-SC/UPC

Place of Origin:SHENZHEN

...Fiber Optical PLC Splitter 1*8 0.9 SC/UPC Mini Module 0.9 G657A1 Hytrel Color of cable PLC 1×8 Single Mode Fiber Optical Splitter SC/UPC Connector splitter plc Neutral package or Customzied packing way. then put into a carton.KEXINT provides a various of 1×N and 2×N PLC splitters, They are all with superior optical performance, high stability and high reliability to meet various application requirements. PLC 1×8 Single Mode Fiber Optical

Brand Name:Seacent

Model Number:1x12 mini module

Place of Origin:Guangdong , China

...Mini Fiber Optic PLC Splitter 1x12 With SC APC Connector Fiber Optic PLC Splitter mini module 1x12 with SC/APC connector Fiber optic splitter is passive optical device that enables a light signal on an optical fiber to be distributed among two or more fibers. Whenever the light beam transmitted in a network needs to be divided into two or more light beams, fiber optic splitters...

Brand Name:YINGDA

Model Number:1x64 PLC Splitter

Place of Origin:china

... that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting.

Brand Name:Seacent

Model Number:2x8 mini module

Place of Origin:Guangdong , China

Fiber Optic PLC Splitter mini module 2x8 with SC/APC connector​ PLCs are manufactured using silica glass waveguide circuits that are aligned with a v-groove fiber array chip that uses ribbon fiber. Once everything is aligned and bonded, it is then packaged inside a miniature housing. PLC splitters have high quality performance, such as low insertion loss, low PDL, high return loss, etc. Seacent Photonics offers excellent performance PLC splitter

Brand Name:Begate

Model Number:1x8

Place of Origin:China

... , input is bare fiber and output is ribbon fiber . The mini steel tube type , both input and output are 0.9mm tight buffer . ABS module is with 2.0mm or 3.0mm cable as input and output . The LGX box is with mini stainless tube inside so it is also with 0

Brand Name:OEM

Model Number:PLCM-1*8-0.9-SCU-1M

Place of Origin:CHINA

Fiber optic PLC splitter 1x8 mini module type fiber splitter 0.9mm loose tube cable with SC / UPC connectors Mini module type Planar Light wave Circuit (PLC) Splitter, widely used in the PON network, utilizes the PLC photonic chip, allows light signal ...

Brand Name:OEM

Model Number:PLCM-1*8-0.9-SCU-1M

Place of Origin:CHINA

Fiber optic PLC splitter 1x8 mini module type fiber splitter 0.9mm loose tube cable with SC / UPC connectors Mini module type Planar Light wave Circuit (PLC) Splitter, widely used in the PON network, utilizes the PLC photonic chip, allows light signal ...

Brand Name:Seacent

Model Number:1x12 mini module

Place of Origin:Guangdong , China

...more fibers. Whenever the light beam transmitted in a network needs to be divided into two or more light beams, fiber optic splitters are used. When the light signal is transmitted in a single-mode fiber, the light energy cannot entirely concentrate in the

Brand Name:DAWNERGY

Model Number:DA-PLC-132-NC-M

Place of Origin:china

...m one or two input fibers to multiple output fibers, which are based on PLC (planar light wave circuit) technology and provide cost effective light distribution solution with small form factor. Dawnergy PLC splitters feature superior optical performance,

Brand Name:DF/Takfly/Neutral

Model Number:TK-PLC-1x32-SA-1M

Place of Origin:Shenzhen, China

...Fiber Optic PLC Splitter SMF-28e fiber with 0.9mm Mini Steel Tube , SC/APC Fiber Optic PLC Splitter Description Takfly's high quality 1x32 Fiber Optic PLC Splitter SMF-28e fiber with 0.9mm Mini Steel Tube and SC/APC connector, it is widely used in FTTH/FTTX/GPON/EPON application. Except 0.9mm mini steel tube package, Takfly also offers 250μm bare fiber mini steel tube, 2.0/3.0mm ABS Box, Termination Box and Rack Mount Packages for our Fiber

Brand Name:OEM and ODM

Model Number:Mini PLC splitter SC APC

Place of Origin:Made in China

...Mini Fiber Optic PLC Splitter Overview of Mini Fiber Optic PLC Splitter As a professional plc splitter manufacturer, Begate produces a planar optical waveguide chip on its own and manufactures PLC splitter with self-developed PLC aligning equipment for automatic coupling. PLC splitter has a good consistency and stable quality. Begate PLC splitter factory offers premium PLC splitters...