max specimen weight 5kg drop test equipment

Brand Name:GAOXIN

Model Number:GX-6052

Place of Origin:China

...Testing Equipment for the drop test machine for phone tester battery and cell test equipment GX-6052 is special designed for small electronics and small battery drop test. Drop height: 300~1500mm in this range adjustable, higher drop is available, for example, 1800mm, over 2000mm. Max testable specimen weight with GX-6052 is 5kg...

Brand Name:LABTONE

Model Number:DT275

Place of Origin:CHINA

... guided drop, payload is up to 5kg. Max specimen size is 450mm Wx 450mm L. It can be used for drop testing in a broad variety of in-dustrial products, including electronic devices such as note-book PC and HDDS, medical products, cosmetic and food ...

Brand Name:ASLi

Model Number:AS-DT-150

Place of Origin:China

... Fall Zones: Two Timer: 1~999999 adjustable Max. Load: 5Kg Power:AC220V External dimension: 1500*1300*1150mm Weight: about 200Kg Testing Standards: GB/T2423.8-1995,IEC60068-2-32:Ed2 configuration List: (1) Machine: 1set (2) Gear Reducer Motor: 1 set (3)

Brand Name:YUYANG

Model Number:YY1403

Place of Origin:China

...Drop Tester Package Carton Box Drop Impact Testing Equipment Description: This tester can determine the ultimate dimension in drop testing and incline impact testing for product and package performance which uses as reference to improve the packing. Special fixtures are available to allow for corner and edge drops. Specifications: Drop Height 300 - 1500mm Max Weight of Specimen 65 kg Test...

Brand Name:Infinity Machine

Model Number:DT2000

Place of Origin:Made in China

...Test Telephone Controlled Free Drop Test Machine, Mobile Device Contolled Drop Test Equipment Model: DT2000 Standard: IEC 60068-2-32 Specification: Model DT2000 Drop height 300~2000mm Max sample weight 2kg Drop height setting Touch panel setting and display Min release height 300mm Counter 0~999,999 (settable) Air source ≥0.5MPa Tester size W1000xD1180xH2415mm Weight About 420kg Power supply AC220V 50Hz 3A or 110V 60Hz 6A Drop

Brand Name:HTI

Model Number:TNT-07

Place of Origin:Dongguan china (mainland)

...Drop Height Electronic Falling Weight / Professional Package Testing Equipment Description: This tester can determine the ultimate dimension in drop testing and incline impact testing for product and package performance which uses as reference to improve the packing. Special fixtures are available to allow for corner and edge drops. Standard: GB4757.5-84 JISZ0202-87 ISO2248-1972(E) Specifications: Drop Height 300 - 1500mm Max Weight

Brand Name:LONROY

Place of Origin:Guangdong, China

...Drop Test Machine/ Phone Tumbling Barrel Tester/Roller drop tester Equipment use Mobile phone drum drop tester is suitable for mobile phone, PDA, electronic dictionary, CD/MP3 continuous rotary (drop) test. IEC60068-2-32, GB/T2324.8 are applicable standards for drop test machine. Cellphone Double Drum Drop Test Machine/ Phone Tumbling Barrel Tester/Roller drop tester Specification Roller Qty 1pcs Max specimen weight 5kg Drop

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-A520-2

...-2 Display Method Digital height indicator (optional) Drop Height 400~1300 mm Single-wing Area (W×L) 350×760 mm Drop Panel Area (W×L) 1200×1400 mm Specimen Max. Size (L×W×H) 1000×1000×800 mm Specimen Max. Weight 640 Kg Outside Dimension (L×W×H)

Brand Name:SKYLINE

Model Number:SL-M006

Place of Origin:China

...Drop Test Machine Application It is suitable for mobile telephone, telephone receiver, handle intercom, MP3, CD, electronic dictionary, all small electronic consumer products in fall testing repeat. Technical parameters Test station 2pcs Allow specimen weight 2kg(max) Height of drop 30~50mm The range of test...

Brand Name:Kinte

Model Number:WH-8808

Place of Origin:Guangdong,China (Mainland)

... with 100mm back-end power cord at the cut, as a specimen, into the drum, according to the provisions of the specimen weight set the number of scrolling, so that the test piece falling impact, and then check the extent of damage. The main parameters: 1,

Place of Origin:China

Brand Name:CHENGFENG

...electronic dictionaries, etc Technical parameters: 1. Drop mobile phones at the same time: 2 units 2. Allowable specimen weight: 2kg(max) 3. Drop height: 60-200mm 4. Test speed range: 6~20 times/min5, PLC controller and touch screen: 1 set 6. Machine size:

Brand Name:LIYI

Model Number:LY-7072

Place of Origin:China

...) Test space: 800mm wide (can customize) Height adjustment: electric 1/3HP Height Display modes: LED Uses: LED Display Carton Box Drop Test Machine with Three Fitting Modes can determine the ultimate dimension in drop testing and incline impact testing for

Brand Name:JINHAIHU

Model Number:XJL-300C

Place of Origin:BEIJING, CHINA

XJL-300C Pipe drop hammer impact test instrument Applicability: XJL-300C Pipe drop hammer impact test instrument is used for the impact test of non-metallic materials, such as plastic, glass, pottery, etc. At the same time, it can also carry out the impact...

Brand Name:Lixian

Model Number:HZ-7014

Place of Origin:China

Drop Ball Testing Machine Equipment overview: Drop ball impact test machine provided the machine is the weight of steel ball, adjust to a certain height, so that free-fall against the specimen, depending on the extent of the damage determine the quality. For plastic, ceramic, acrylic, glass fiber coating materials and testing of fastness. To meet the standard: Reference JIS test...

Brand Name:Haida

Model Number:HD-A534

Place of Origin:China

...Testing Equipment For Clamp Force Testing​ Clamp force test machine.pdf Safety Protection Overload protection, overvoltage protection & limited position protection device The Usage: Specimen shape Parallelepiped transport package Max. Specimen weight 500kg Clamping pressure force According to the transport diagram on the test...

Brand Name:Btutest

Model Number:BTU-CICMF100

Place of Origin:Made in China

...Testing Equipment Standard: EN 12390-1, ASTM C39/C192, AASHTO T23/T126, BS 1881:108 Description: We provide wide range of high quality concrete specimens mould.Concrete Testing Equipment Specification: Items Description Dimension (LxWxH) mm Approx. Weight Cast iron cube mould four part 100 x 100 x 100 8.5kg...

Brand Name:Aoxing

Model Number:18", 24", 457mm, 610mm

Place of Origin:China

... Trip Hammer is designed for driving the split tube sampler or cone assembly required for the Standard Penetration Test (SPT) or Cone Penetration Test (CPT). The hammer consists of a weight of 63.5 kg complete with pick-up and self-tripping mechanism that

Place of Origin:China

Brand Name:KeRang

Vertical Hammer Test Apparatus SH-9 Parameters: Model SH-9 SH-9A SH-9B Release mode Electromagnet release Electromagnet release Electromagnet release Drop floor Nylon base 600mm*600mm; thickness 8mm; hardness HRR85-100. Nylon base 1000mm*1000mm; thickness ...

Brand Name:MITECH

Model Number:MT-1A

Place of Origin:China

Mitech professional manufacturer of Magnetic Particle Flaw Detector MT-1A with higher quality Technical Parameters Lifting ≥45N(no less than 5kg) Integrative sensitivity type A 15/100 standard specimen, artificial notch clearly showed Working voltage DC15V...

Brand Name:TESTEX

Model Number:TF110

Place of Origin:China

5Kg Manual Crease Recovery Tester , To Determine The Recovery Properties Of Fabrics Application Crease Recovery Tester & Loading Device, to determine the recovery properties of fabrics by creasing in a loading device for a pre-determined time using a ...