loranger test socket

Place of Origin:China

Brand Name:HongCe

Model Number:PI-1

... heating resistance and burning resistance of bolt and plug with insulation sleeve. It can imitate the insulated parts of which the plug-and-socket device’s safety performance may be damaged by electric heat stress. It should not be over damaged for

Place of Origin:China

Brand Name:HongCe

Model Number:IN-1

Insulation Sleeves of Plug Pins Abrasion Test Apparatus Product details: The test apparatus is designed and manufactured according to the standard requirement of IEC884 Figure 28. It is used to test the abrasion resistance of the insulating bushing of the ...

Brand Name:HongCe

Model Number:HO6503

Place of Origin:China

IEC60320-1 Clause 18.2 Figure13 Coupler Heating Device In Hot Conditions Standard:Confirm to the IEC60320-1, clause 18.2 figure13 standard requirement. Application:It is used for testing the heat resistance of coupler in hot conditions and very hot ...

Brand Name:HongCe

Model Number:HC9902

Place of Origin:China

IEC60884 Clause 10.1 300N Plug Compression Mechanical Strength Test Equipment Product information: The specimens are subjected to a compression test as shown in figure 8, the temperature of the pressure plate, of the base and of the specimens being (23±2)...

Brand Name:HongCe

Model Number:CK-5

Place of Origin:China

...test card,Shortest Path Between Two Conductive Parts Standard: IEC 60884-1 'Plugs and socket-outlets for household and similar purposes – Part 1: General requirements' clause 27.1. Creepage distances, clearances and distances through sealing compound shall be not less than the values shown in table 23. Test...

Brand Name:HongCe

Model Number:HC9924

Place of Origin:China

...Test At Low Temperature Mechanical Release Standard: IEC 60884-1 'Plugs and socket-outlets for household and similar purposes – Part 1: General requirements' clause 24.4, clause 30.4, figure 27 and figure 42. Standard description: Clause 24.4: The specimens are subjected to an impact test...

Brand Name:HongCe

Model Number:HC9922

Place of Origin:China

..., procedure 2 of IEC 60068-2-31, the number of falls being – 1 000 if the mass of the specimen without flexible cable does not exceed 100 g, Plug Socket Tester – 500 if the mass of the specimen without flexible cable exceeds 100 g,

Model Number:HC9919

Brand Name:HongCe

Place of Origin:China

Power Cord Bending Tester for Non-Rewirable Plugs and Portable Socket-Outlets | IEC 60884-1 Cord Flexing Fatigue Strength Testing Equipment Product Overview When electrical products are used every day, power cords are repeatedly bent, twisted, and ...

Brand Name:Kinte

Model Number:WH-8818CD

Place of Origin:Guangdong,China (Mainland)

...Socket Plug Tester 200 mm / Min Servo Motor Drive WH-8818CD computer automatic insertion force testing machine This machine is suitable for a variety of connector insertion force and pull-out test, with the patented design of the automatic seeking heart device, will be fully accurate plug power test, the use of WINDOWS, (Test...

Brand Name:SHC

Model Number:SC-ASCL2.13

Place of Origin:China

...Test AS / NZS 3112 Plug Socket gauge Standard Product Name AS/NZS3112 FigureA1 Rating and Dimensions of low voltage plugs gauge Fig A1 (10A, 15A, 20A) AS/NZS3112 Figure B1 Rating and Dimensions of low voltage plugs gauge Fig B1 AS/NZS3112 Figure C1 During normal insertion test plug in Fig C1(10A,15A,20A) AS/NZS3112 Figure D1 During normal insertion test...

Brand Name:SHC

Model Number:SC-ASCL2.13

Place of Origin:China

...Test AS / NZS 3112 Plug Socket gauge Standard Product Name AS/NZS3112 FigureA1 Rating and Dimensions of low voltage plugs gauge Fig A1 (10A, 15A, 20A) AS/NZS3112 Figure B1 Rating and Dimensions of low voltage plugs gauge Fig B1 AS/NZS3112 Figure C1 During normal insertion test plug in Fig C1(10A,15A,20A) AS/NZS3112 Figure D1 During normal insertion test...

Brand Name:PEGO GROUP

Model Number:PG-PTA

Place of Origin:China

...Test Apparatus for Insulating Sleeves Plug Socket Tester 1. Introduction: The high temperature pressure test apparatus conforms to the standard of IEC60884-1 clause 30.1 figure 41, IEC60598-2-20 clause 20.15, EN60811-3-1 and GB2099.1-2008 clause 30.1 figure 41 etc.. It’s used to the high temperature resistance test...

Brand Name:PEGO GROUP

Model Number:PG-TP884

Place of Origin:China

... is for checking non-accessibility live part through shutters, 1N test probe is for checking non-accessibility live part through shutters and live parts of socket-outlets with increased protection. 2. Parameter 20N Push force Rigid steel wire Diameter:

Brand Name:Pego

Model Number:PG-CPA

Place of Origin:China

Cover-Plates Test Apparatus 1. Introduction The cover-plates test apparatus meets the requirements of IEC60884-1 clause 24.14.2 figure 31 and IEC60669-1 clause 20.5.2 figure13. It’s used to verify the removability of covers or cover-plates. ​2. Parameters...

Brand Name:Sinuo

Model Number:SN2142

Place of Origin:China

...household and similar purposes- Part1: General requirements” clause 13.4 and figure46 Sample: Household sockets without screw terminals Test purpose: Used to detect the socket structure of the screwless terminal During or after the socket is installed on

Place of Origin:Guangdong, China (Mainland)

Brand Name:HABOTEST

Model Number:HT106B

...Socket Tester Pro Features: GFCI (US) / RCD check button Home Improvement Assistance LCD Display Voltage Measurement Easy to use 12 months warranty (1 to 1 exchange) Function HT105 HT106 HT105B HT106B HT105D HT106D HT105E HT106E Voltage range AC 48~250V GFCI test >5mA >5mA RCD test >30mA >30mA >30mA >30mA >30mA >30mA Voltage measurement (48V~250V/45~65Hz) √ √ √ √ LCD display √ √ √ √ Backlight √ √ √ √ Socket

Place of Origin:Guangdong, China (Mainland)

Brand Name:HABOTEST

Model Number:HT106B

...Socket Tester Pro Features: GFCI (US) / RCD check button Home Improvement Assistance LCD Display Voltage Measurement Easy to use 12 months warranty (1 to 1 exchange) Function HT105 HT106 HT105B HT106B HT105D HT106D HT105E HT106E Voltage range AC 48~250V GFCI test >5mA >5mA RCD test >30mA >30mA >30mA >30mA >30mA >30mA Voltage measurement (48V~250V/45~65Hz) √ √ √ √ LCD display √ √ √ √ Backlight √ √ √ √ Socket

Place of Origin:China

Brand Name:KeRang

Test Apparatus for lateral stress LS-1 Product overview: The appliance conforms to the standard of IEC884 figure 13. It is suitable for checking socket of rated current is not bigger than 16A and the voltage is not bigger than 250V. Its principle is to see whether there will be any damage to the socket in the standard sense when the electrical appliances insert to the socket...

Brand Name:PEGO

Model Number:PG-PL

Place of Origin:China

... the electrical appliance in charged state, then to do the aging test and on-off ability test, the load current and surge current can be customized according to the user’s demand. This equipment adopts cabinet type, the shell is made by iron plates with

Brand Name:PEGO

Model Number:PG-TB

Place of Origin:China

...socket Tester Conforms to IEC60884 and VDE0620 Introduction The TB series tumbling barrel test machine meets the requirements of GB2099.1-2008 clause 24.2, GB2423.8, GB7000, GB13140, VDE0620, IEC68-2-32, BS1363.1, EN50075, UL60730 and etc., tumbling barrel test...