lamp diffuser

Brand Name:Luxtronic

Model Number:BPL-36

Place of Origin:China

... lamp 36W /SMD Panel Lamp LED Light 1. Housing for LED panel light: ---- Frame is made of high quality Aluminium, rust and oil removed, under anti-rust treated and rust proof 2. Diffuser for LED panel light: ---- Polycarbonate, Acrylic LED Diffuser ...

Brand Name:Luxtronic

Model Number:BPL-36

Place of Origin:China

... lamp 36W /SMD Panel Lamp LED Light 1. Housing for LED panel light: ---- Frame is made of high quality Aluminium, rust and oil removed, under anti-rust treated and rust proof 2. Diffuser for LED panel light: ---- Polycarbonate, Acrylic LED Diffuser ...

Brand Name:JYLIGHTIING/HEKEYLT

Model Number:HEKEYLT-9213

Place of Origin:CHINA GUANGDONG

...soft and warm tones. Wall lamps and floor lamps can be used to replace the ceiling lamps in the center of the room. The wall lamps should be made of diffused materials with low surface brightness. The wall above the head of the bed is equipped with a brown

Brand Name:CADYSUN

Model Number:CWP-ZA

Place of Origin:China

...Lamp Stainless Clip Opal PC Diffuser ◆Product introduction: The CWP-ZA product has a simple appearance, uniform light output, and is more economical and practical; no hasp, inner locking design, preventing easy opening and increasing safety; more stable waterproof performance, lamps are Class II lamps, with higher safety performance; lamps...

Brand Name:ChenMu

Model Number:CM-SZ9107-A170D-12H1

Place of Origin:Zhejiang,China

...Lamp Lensens Quick detai Product Name: CM-SZ9107-A170D-12H1 Beam Angle: 170° Efficiency: 92% Material: PC LED Chips: 3030/2835 Size: Ø91*H7 mm Application: Ceiling Lighting Lamp.panel Lighting Lamp Description 170 Degree 12H1 Led 2835/3030 PC Material Ceiling Lamp Lensens The "170 °" specification refers to the beam angle of the lens, which is relatively wide and diffuse...

Brand Name:HEKEYLT

Model Number:JYL-PFF8503

Place of Origin:China-Guangdong

...Lamp Simple Creative Showroom Living Room Model Room Bedroom Floor Lamp The poskrisi lampshade consists of two hemispheres. The light of the lamp is emitted through a transparent lampshade. Through the gap between the two halves of the hood, the light is extra distributed. poskrisi lamps are made of moulded fiberglass, and diffusers...

Brand Name:BEISU

Model Number:BS-T5

Place of Origin:China

...lamp shade PC led tube production line for lighting profiles making Application: PC lamp production line mainly produces: T5/T8/T10 fluorescent tube, LED tube (LED fluorescent tube), PC tube, transparent two-color tube, frosted tube and fluorescent lamp. The types of lamp include smooth surface, two-color, frosted, sandblasting, Light diffusion...

Place of Origin:China

Model Number:GPL-C18012-02

...diffuser design, the light transmittance rate is high, and it also solves the LED lighting problems of transmittance, glare and diffuser. •We import super light poscap LED light source, which has a long working life and consume less power (save more than

Brand Name:ANXIN

Model Number:AX-SPA 6654

Place of Origin:GuangDong CHINA

....No matter what the original design of the distribution curve was,As long as the light passes through the diffuser plate it changes the beam Angle to 160~176°,so look from the side, the board face of lamps and lanterns has the feeling of layer fog fog.

Brand Name:ANXIN

Model Number:AX-SPA1122

Place of Origin:GuangDong CHINA

... matter what the original design of the distribution curve was,As long as the light passes through the diffuser plate it changes the beam Angle to 160~176°,So look from the side, the board face of lamps and lanterns has the feeling of layer fog fog.The

Brand Name:ANXIN

Model Number:AX-SPA8876

Place of Origin:GuangDong CHINA

...t the original design of the distribution curve was,As long as the light passes through the diffuser plate it changes the beam Angle to 160~176°,so look from the side, the board face of lamps and lanterns has the feeling of layer fog fog.. The greater the

Brand Name:ANXIN

Model Number:AX-SPA7895

Place of Origin:GuangDong CHINA

... what the original design of the distribution curve was, As long as the light passes through the diffuser plate it changes the beam Angle to 160~176°,so look from the side, the board face of lamps and lanterns has the feeling of layer fog fog. B. The

Brand Name:ANXIN

Model Number:AX-PSS3001

Place of Origin:GuangDong CHINA

... with light.No matter what the original design of the distribution curve was,As long as the light passes through the diffuser plate it changes the beam Angle to 160~176°,so look from the side, the board face of lamps and lanterns has the feeling of

Brand Name:ANXIN

Model Number:AX-SPA 6654

Place of Origin:GuangDong CHINA

....No matter what the original design of the distribution curve was,As long as the light passes through the diffuser plate it changes the beam Angle to 160~176°,so look from the side, the board face of lamps and lanterns has the feeling of layer fog fog.

Brand Name:ANXIN

Model Number:AX-SPP3808

Place of Origin:GuangDong CHINA

... with light.No matter what the original design of the distribution curve was,As long as the light passes through the diffuser plate it changes the beam Angle to 160~176°,so look from the side, the board face of lamps and lanterns has the feeling of

Brand Name:ANXIN

Model Number:AX-SPA1122

Place of Origin:GuangDong CHINA

... matter what the original design of the distribution curve was,As long as the light passes through the diffuser plate it changes the beam Angle to 160~176°,So look from the side, the board face of lamps and lanterns has the feeling of layer fog fog.The

Brand Name:ANXIN

Model Number:AX-SPA8876

Place of Origin:GuangDong CHINA

...t the original design of the distribution curve was,As long as the light passes through the diffuser plate it changes the beam Angle to 160~176°,so look from the side, the board face of lamps and lanterns has the feeling of layer fog fog.. The greater the

Brand Name:ANXIN

Model Number:AX-SPA7895

Place of Origin:GuangDong CHINA

... what the original design of the distribution curve was, As long as the light passes through the diffuser plate it changes the beam Angle to 160~176°,so look from the side, the board face of lamps and lanterns has the feeling of layer fog fog. B. The

Brand Name:ANXIN

Model Number:AX-SPP3810

Place of Origin:GuangDong CHINA

... great interference with light.No matter what the original design of the distribution curve was,As long as the light passes through the diffuser plate it changes the beam Angle to 160~176°,so look from the side, the board face of lamps and lanterns has