iec testing and report

Brand Name:kingpo

Model Number:Model KP9280

Place of Origin:china

...IEC 60065, Clause 4.2 and 4.3 and IEC 62368-1, Annex E. It is especially developed for all types of tone frequency amplifiers,when you need 2 channels/phase 90° Technical Specification •Pink noise or sine wave 1000 Hz (not at the same time) •Two output channels when testing...

Brand Name:kingpo

Model Number:IP-IK1200

Place of Origin:china

Pendulum Hammer ,IEC 60068-2-75 Test Eha: Pendulum hammer 1. Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) 2. IEC 62262:2002 /IEC 60068-2-75 3. IK code IK07-IK20 With 2J,5J,10J,20J,50J ...

Brand Name:KingPo

Model Number:KP-601A

Place of Origin:China

IEC 60601-1 Spark Ignition Tester to check the RISK of fire in an OXYGEN RICH ENVIRONMENT for ME EQUIPMENT & ME SYSTEMS 1.According to standard: IEC 60601-1-Figure 34-figure37(clause 11.2.2) 2.Specifications Power Supply AC220V 50HZ According to the standard: IEC 60601-1-Figure 34-37 Test speed: 0-30 times/min (PLC control) Test...

Brand Name:kingpo

Model Number:KP62680

Place of Origin:china

IEC 62680- 1-2/ IEC 62680- 1-3 USB TYPE-C Compliance Testing Plan The EU officially issued the revised directive on universal chargers Directive (EU) in the Official communique 0J on 7 December 2022/...

Brand Name:kingpo

Model Number:KP-35B2A

Place of Origin:CHINA

IEC 60335-2-120 Electronic cigarette battery enclosure tester Compliant with standards and clauses: IEC 60335-1: 2020-Appendix BB-20.1.,IEC 60335-2-120-Appendix B-20.1 Purpose of the test: For the measurement of the pressure generated when the enclosure of a battery-operated appliance containing a monolithic battery using metal ion chemistry withstands the battery during a fault, and to verify the enclosure strength of the battery case. Test

Brand Name:kingpo

Model Number:IEC60335-2-64

Place of Origin:china

IEC 60335-2-64 Test Probe B Of IEC 61032 With Circular Stop Face With A Diameter Of 56 Mm Parameter: 1,Jointed Finger Length:120mm(30/30/60mm); 2,Dam-board Diameter:56mm; 3,Standard:IEC60335-2-14|EN60335-2-14|GB4706.30 IEC60335-2-14|EN60335-2-14

Brand Name:HJ

Model Number:HC9914B/HC9915A

Place of Origin:China

Two Test Stations IEC 60884-1 Plug Socket Test Equipment For Breaking Capacity Standard: IEC 60884-1 ‘Plugs and socket-outlets for household and similar purposes – Part 1: General requirements’ clause 20, clause 21 and figure 16; IEC 60669-1 ‘...

Brand Name:kingpo

Model Number:IEC 60335-2-49 figure 101

Place of Origin:china

Kingpo Splash Test Apparatus Iec 60335-2-49 Figure 101 Long Using Life Splash test apparatus IEC 60335-2-49 figure 101 The apparatus shown in Figure 101 is used. During the test, the water pressure is so regulated that the water splashes up 150 mm abo...

Brand Name:kingpo

Place of Origin:china

IEC 60598-1 Clause 8.15 Arrangement For Impact Test For Handlamps With a Handle Or Shell Of Flexible Material Product information: This test device is designed and manufactured according to the standard requirements of IEC 60598-1 clause 8.15.1 for handlamps having a handle or shell of flexible material, such as rubber or polychloroprene, compliance shall be checked by the following test...

Brand Name:kingpo

Model Number:IEC 60598-1 clause 9.2

Place of Origin:china

IEC 60598-1 clause 9.2 expanded metal spacer , Tests for ingress of moisture Conform to IEC 60598-1 clause 9.2 Where connection is made by a plug or a similar device, then this shall be regarded as part of the complete luminaire and shall be included in the tests and similarly for any separate controlgear. For tests of 9.2.3 to 9.2.11, a fixed luminaire intended for mounting with its body in contact with a surface shall be tested...

Brand Name:DAXIAN

Model Number:DX8817

Place of Origin:China

IEC 60227 Cord Load Breaking Strength Testing Machine for Cable and Wire ​ Product description: Equipment use: Mainly used for core breaking test of cords. Conforms to the standard: It meets the test requirements of the load breaking test in GB/T5023.1-2008 and GB/T5023.2-2008 , IEC 60227 Technical parameters: 1. Overall dimensions: length x width x height: 50x 50x 150cm 2, heavy hammer: 0.5kg 3, test height: 0.8M 4, test current: 0.1A 5, test

Brand Name:Infinity Machine

Model Number:IN-IP56X-512L

Place of Origin:Made in China

IEC60529 IP5X & IP6X Dust Chamber for IEC Testing I Dustproof Environmental Chamber for Lab IP5X IP6X 512L Dustproof Environmental Tester Purpose: Dustproof resistant testing machine is to test the physical and other related properties of products such as ...

Brand Name:OEM/ODM

Model Number:GT620

Place of Origin:Changzhou, China

...-proof standard GB3836 series documents, passed the national explosion-proof agency test and obtained the explosion-proof certificate and test report; Adopt high-density aluminum alloy high pressure die -casting forming, high strength, impact resistance,

Brand Name:HongCe

Model Number:LT-3

Place of Origin:China

IEC 60112 solid insulating materials, IEC 60695 leakage tracking tester Standard: IEC 60112, IEC60695 and etc product introduction The test machine is designed and manufactured according to the requirements of the relevant standards, such as IEC60695. It...

Brand Name:Sinuo

Model Number:SN441

Place of Origin:China

... 22.1 Equipment Overview The test device is suitable for sealing parts and enclosure’s sand and dust resistance capacity testing of the electrical and electronic products, car and motorcycles spare parts and seals. In order to detect the use, storage,

Brand Name:Sinuo

Model Number:SN2210-84

Place of Origin:China

..., and For Electric Vehicles" clause 26.6. Equipment Overview This 75N test rod is required by Conforms to IEC 62196-1Ed.4CDV 2020 clause 26.6. Test principle: One plug contact of the same system is applied for 1 min with a force of 75 N against the

Brand Name:Sinuo

Model Number:SN1101

Place of Origin:China

IEC 61851 Electric Vehicle EVSE Marking Durability Testing Equipment Complied Standards & Clauses IEC/CDV 61851-1 "Electric vehicle conductive charging system - Part 1: General requirements" clause 16. Equipment Overview This marking durability test apparatus is suitable for abrasion testing of all kinds of plastic injection, silk screen surface,etc. The testing...

Brand Name:Sinuo

Model Number:SN1012

Place of Origin:China

IEC 62196 Fig12 Electric Vehicle Charging Gun Terminal Testing Equipment Complied Standards & Clauses This testing machine conforms to IEC 62196-1:2020 clause 13.3.1 fig12, table 3, and UL486A-B:2009clause 9.3.2.1,clause 9.3.2.3,clause 9.3.2.4 and table 26 and figure 6 etc. Technical Parameters Parameter Name Parameter Data Power Supply According to customer requirements Test Station Single Test...

Brand Name:Sinuo

Model Number:SNQC1010

Place of Origin:China

... Product Overview The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle unless it is provided with a cable ...