glow wire needle flame test chamber

Brand Name:kingpo

Model Number:KP-GWT01

Place of Origin:china

Glow Wire Tester , glow wire tester without test chamber , IEC 60695-2-10 Glow Wire Tester Introduction Glow wire test is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695-2-10,UL 746A .It makes required material(＞77%Ni/20±1%Cr) and heating wire in required shape(Φ4mm-chromel-filament)heated up to test...

Place of Origin:China

Brand Name:GC

Glow Wire Combusting Test Machine for Plastic Material Product Description Parts of electrical and electronic equipment may be exposed to overheating stress due to the action of electricity, and their deterioration may reduce the safety performance of the equipment. These parts should not be unduly affected by heat and fire generated inside the equipment. Parts of insulating materials or other solid combustible materials that are prone to flame

Brand Name:SKYLINE

Model Number:SL-SE03

Place of Origin:China

...leakage current in cable & wire and the like. It meets the requirements of Chinese GB4706.1, GB5169.5, and IEC60695-2-2 and IEC61347-1 standards. Application Electrical & electronic product Components and accessories of ...

Brand Name:Sinuo

Model Number:SN773A

Place of Origin:China

... result from fault conditions, in order to assess the fire hazard by a simulation technique. The results of this test may be used as elements of a fire hazard assessment which takes into account all of the factors which are pertinent to an assessment of

Brand Name:TONY

Model Number:HTE-009A

Place of Origin:China

...monitor the wire temperature 4.0 Input power: 220V/50Hz 5.0 The travel unit and the glow wire is enclosed by a steel chamber 6.0 The chamber shall include a level and adjustable feet Parameters: Needle-shaped burner Stainless steel,Inner bore: Φ 0.5mm ±

Brand Name:KINGPO

220V 50Hz Ф0.9mm Needle Flame Test Chamber With 45 Degree Angel IEC60695-11-5 Needle Flame Test Chamber Product information: The Needle Flame Tester consists of a Ф0.9mm needle-shaped burner that tilts with the angel of 45°and provide it with butane gas...

Brand Name:Sinuo

Model Number:SN772

Place of Origin:China

... 4.15.1, IEC60335-1 clause 30.2.3.2, Annex E, clause 13.3, etc. Equipment Overview The Needle Flame Tester consists of a Ф0.9mm needle-shaped burner that tilts with the angel of 45°and provide it with butane gas. The fire hazard of the equipment when

Brand Name:HeJin

Model Number:NF-2

Place of Origin:China

Flame Test Chamber Needle-Flame Test Apparatus PLC Control 4mm Coper Block Standard: IEC 60695-11-5 Fire hazard testing – Part 11 -5: Test flames – Needle-flame test method – Apparatus, confirmatory test arrangement and guidance. Application: The Needle-Flame Test Apparatus to simulate the effect of a small flame...

Brand Name:ZL

Model Number:ZL-3029

Place of Origin:CHINA

..., GB / T5169.10-2006, GB / T5169.13-2006 and GB4706.1 standards. It is suitable for electrician and electronics Fire hazard testing of products, appliances and their materials to simulate thermal stress caused by heat sources or

Brand Name:Haida

Model Number:6011-HD

Place of Origin:China

Needle Flame Testing Instrument Product Description This instrument simulates small flames generated under fault conditions (e.g., leakage currents, component overheating, poor contacts) to assess fire hazards. Needle Flame Testing Instrument is specifically designed for evaluating fire risks in small components where glow-wire or horizontal/vertical flame tests are unsuitable. If a sample ignites during glow-wire testing, the needle flame test

Brand Name:VOUCH

Model Number:5600

Place of Origin:CHINA

... the safety of the operator. The Needle Flame Tester consists of a diameter of 0.9mm needle burner that tilts to 45degree from the vertical and is fueled with butane gas. The test time for the temperature of the standard copper block to increase from

Brand Name:HongCe

Model Number:NF-2

Place of Origin:China

... wire test equipment, hot wire ignition test machine and etc.. The new version PLC control 7 inch needle-flame tester is designed and manufactured according to the standard requirement of IEC60695-11-5,IEC60335-1, GB4706.1-2005, GB5169.5-2008 and etc.. It

Brand Name:Gold

Model Number:GD-ISO9185

Place of Origin:CHINA

...Glow-Wire Test (IEC 60695-2-10/11) to assess ignition resistance under overheating, Flame Tests (50W/500W and Needle Flame) for material flammability, and Horizontal/Vertical Burning Tests (IEC 60695-11-10) to classify flame-retardant ratings (e.g., V-0,

Brand Name:Liyi

Place of Origin:Guangdong, China

Liyi IEC60695 Needle Flame Testing Machine Tester Flammability Chamber Product Description Needle flame tester is suitable for lighting, low voltage electrical appliances, household appliances, machine tool electrical appliances, motors, power ...

Brand Name:PRECISION

Model Number:SBB20

Place of Origin:CHINA

IEC 60695 Flammability Temperature Tester Glow Wire Combustion Resistance Testing Machine In the realm of electrical and electronic product safety testing, the IEC 60695 Flammability Temperature Tester Glow Wire Combustion Resistance Testing Machine is a ...

Brand Name:AI

Model Number:VW-N

Place of Origin:China

... near by of cable or flexible wire when it caught fire.The whole test is carried out in a sealed test chamber with a volume of 4.54m³. Main advantages 1, The vertical flame test chamber is electrolytic plate electrostatic spraying, elegant appearance,

Brand Name:YUYANG

Model Number:YY-UL1581

... conditions such as overheat and overcurrent.This sect will be manufactured strictly according to UL1581 sect 1080.1~1080.14., which fully meets the VW-1 Flame Test standard and is applicable to FT-1

Brand Name:BAXIT

Model Number:BXT-ZY

Place of Origin:Shanghai, China(mainland)

Needle Flame Testing Machine Combustion Test Equipment The needle flame testing machine is designed and manufactured according to the corresponding requirements of IEC60695-2-2, GB5169.5-97, GB4706.1-98, and is suitable for the flame resistance test of non-metallic materials. The instrument is easy to operate and uses imported instruments (Autonics). The combustion chamber...

Brand Name:DAXIAN

Model Number:DX8516

Place of Origin:China

DX8521 Needle flame testing machine Working principle: Due to fault conditions in the product, such as fault current flowing through the leakage path, overheating of components or parts, poor contact, etc., flames may be caused, which may then shoot onto ...