galvanized test plug

Brand Name:kingpo

Model Number:KP-8825

Place of Origin:china

...;Plug,socket-outlets,vehicle couplers and vehicle inlets–Conductive charging of electric vehicle-Part1:Charging of electric vehicles up to 250A a.c and 400A d.c" clause 7.11 and clause 7.15 IEC 60309-1:2012 "Plug,socket-outlets and couplers for

Brand Name:HongCe

Model Number:HC9902

Place of Origin:China

...-1 Figure 8 Purpose: Suitable for pressure testing of plugs to check whether the mechanical strength of the plug meets standard requirements. Sample range: plug Structure and function: Use weights to apply force, 150N and 300N are superimposed forces. The

Brand Name:HongCe

Model Number:HC9908

Place of Origin:China

... requirements' clause 14.23.2 Standard description with Plug Socket Tester: The plug socket tester torque test device is inserted into a fixed socket-outlet complying with this standard, the socket-outlet is pivoted about a horizontal axis through the

Brand Name:HongCe

Model Number:HC9902

Place of Origin:China

...-1 Figure 8 Purpose: Suitable for pressure testing of plugs to check whether the mechanical strength of the plug meets standard requirements. Sample range: plug Structure and function: Use weights to apply force, 150N and 300N are superimposed forces. The

Brand Name:PEGO

Model Number:AN/NZS3112

Place of Origin:China

...Plug Socket Tester Stainless Steel Plug Socket Gauge 1 years warranty Figure number Description Figure 2.5 Pressure test apparatus for insulation on insulated plug pins at high temperature Figure 2.6 Impact test apparatus for insulation on insulated plug pins at low temperature Figure 2.9 Mounting of plug for temperature rise test Figure 2.10 Pin clamping unit for the temperature rise test...

Brand Name:HeJin

Model Number:HC9933

Place of Origin:China

...’ clause 25.2, 25.3 and figure 37 Application: This device is use for heat resistance test to verify the heat resistant performance of insulating material covers and outer parts of the electric appliance . Plug Socket Test Equipment Test sample:

Brand Name:kingpo

Place of Origin:china

... for testing the firmness of the plug and the plug pin. The plug is placed on a rigid steel plate provided with holes suitable for the pins of the plug. The distance between the centers of the holes shall be the same as the distances between the centers of

Place of Origin:China

Brand Name:HongCe

Model Number:FL-1

... of IEC 60884-1 figure 21 which calls for 10,000 flexing at a rate of 60 flexing per minute. Six cables or cords fitted with plugs can be tested simultaneously. The cables are connected to a socket and the tail of the cable is connected to the

Place of Origin:China

Brand Name:HongCe

Model Number:FL-1

... of IEC 60884-1 figure 21 which calls for 10,000 flexing at a rate of 60 flexing per minute. Six cables or cords fitted with plugs can be tested simultaneously. The cables are connected to a socket and the tail of the cable is connected to the

Place of Origin:China

Brand Name:HongCe

Model Number:FL-1

... of IEC 60884-1 figure 21 which calls for 10,000 flexing at a rate of 60 flexing per minute. Six cables or cords fitted with plugs can be tested simultaneously. The cables are connected to a socket and the tail of the cable is connected to the

Brand Name:HongCe

Model Number:HC9914

Place of Origin:China

... socket-outlets and plugs with pins which are not solid, by means of an appropriate test apparatus. During the test, no sustained arcing shall occur. After the test, the specimens shall show no damage impairing their further use and the entry holes for

Brand Name:HongCe

Model Number:HC9919

Place of Origin:China

... requirement of IEC 60884-1 figure 21, which is used to process the bending test for the power cord of non rewirable plugs, appliances and similar electrical appliances (electric tools). The device can be preset test times (up to 999999), it can carry out

Brand Name:HongCe

Model Number:HC9910C

Place of Origin:China

... rise under normal operation of electrical appliances. Test sample: Household plugs and sockets Plug Socket Tester Feature: External type, thermocouple wire directly connected to the sample. PLC control and touch screen operation, ...

Brand Name:Pego

Place of Origin:China

Model Number:PG-CRT

...Testing Equipment IEC60320-1 Pull Test Equipment for Connectors and Plug Connectors 1. Introduction The pull test apparatus designs to meet the test requirements of IEC60320-1 clause 22.2.3 and figure 6, for testing the cord (cable) anchorage of connectors / plug connectors relieve from strain and twist. Fix the test sample in the test apparatus, so that the axis of the cord is vertical where it enters the connector / plug

Brand Name:Sinuo

Model Number:SNQC1023A

Place of Origin:China

... devices such as electric vehicle charging interfaces, industrial plugs and sockets, and couplers can withstand the mechanical stress, electrical stress, and thermal stress that occur during normal use without excessive wear or other harmful ...

Brand Name:SKYLINE

Place of Origin:China

... of the plug-in device with plug-in pin on the socket during normal use is within the specified range. Compliance: It is suitable for testing the torque exerted on the output socket by the device which is to be inserted into the fixed output socket and is

Brand Name:KingPo

Place of Origin:China

... IEC60335 -2- 15 which is used to test the cordless kettle plug life. Test principle and product feature: Test principle:The device is driven by the motor and crank connecting link. And the kettle is pulled out for 10000 times at the rate of 10 times per

Brand Name:kingpo

Place of Origin:china

... plug component parts without overmold shall be tested using the mechanical wrenching test fixture, as illustrated in Figure E-1. The fixture substitutes machined metal parts for the receptacle. For plug component part testing, the supplier shall provide a

Brand Name:Gaoxin

Model Number:GX-4022

Place of Origin:China

... Electric drive Weight 310kg Volume 91×55×99cm Test standard IEC884-1, BS1363 2.Product Summary: Cut off the cord with 100mm behind plug as being a test specimen. Put it into Tumbling barrel,then preset the tumbling numbers according to the weight of

Brand Name:PEGO

Model Number:BS1363-1

Place of Origin:China

...Test Apparatus Figure number Description BS1363-1 Fig.1 Test pin BS1363-1 Fig.2a. Apparatus for mechanical strength test on resilient covers BS1363-1 Fig.2b Hardwood block for figure 2a BS1363-1 Fig.5 BS1363-1 Fig5 BS1363-1 Fig.7 Mounting plate BS1363-1 Fig.8 Plug pin deflection test apparatus for resilient plugs BS1363-1 Fig.9 Apparatus for abrasion test on insulating sleeves of plug...