exploitation cable testing machine

Brand Name:ZL

Model Number:ZL-1018

Place of Origin:China

... of bearing deformation of metal wires and other wire ropes with diameters of φ6~φ20mm during reversing. The test can reveal surface defects of wire during the testing process. ZL-1018 Wire Torsion Testing Machine.pdf Technical Parameters Range of

Brand Name:AI

Model Number:CFRTM

Place of Origin:CHINA

...Testing Machine with Shock and Water Introduction This cable fire resistance testing machine to be used for testing cables required to maintain circuit integrity when subject to fire alone or fire with shock where the test condition is based upon flame with a controlled heat output corresponding to a temperature of at least 750˚C or fire with shock at a temperature of at least 830 °C. ​IEC 60331 Test for electric cables...

Brand Name:ZL

Model Number:ZL-1018

Place of Origin:China

...Cable Torsion Testing Machine Wire Cable Torsion Testing Machine is primarily used to test the deformation capacity of metal wires and wire ropes with diameters ranging from φ6mm to φ20mm during reversing operations. The testing process effectively reveals surface defects in the wire. ZL-1018 Wire Torsion Testing Machine.pdf Technical Parameters Range of Specimen Diameter 0.1-1mm 1-3mm 3-10mm Test...

Brand Name:ZL

Model Number:ZL-1027

Place of Origin:China

... at the cable, then to swing the jig right and leftwith the setting angle. after rotating to required cycles then stop to check the cable; or check the rotation cycles after cable broken while the cable is tested by connecting to the electricity. While the

Brand Name:ZL

Model Number:ZL-1027B

Place of Origin:China

...Cable Plug Bend Testing Machine With 6 Groups Test Stations This advanced testing equipment is designed for comprehensive cable and plug bending tests, featuring six simultaneous test stations for efficient quality assessment. Application & Standards Compliance This testing machine...

Brand Name:ZL

Model Number:ZL-1018

Place of Origin:China

... capacity of metal wires and wire ropes with diameters ranging from φ6mm to φ20mm during reversing operations. The testing process effectively reveals surface defects in the wire. Technical Specifications Range of Specimen Diameter 0.1-1mm 1-3mm 3

Brand Name:ZL

Model Number:ZL-1048

Place of Origin:China

... under fire conditions, ensuring compliance with international safety standards. Compliance Standards BS 6387-2013 - Performance requirements for cables to maintain circuit integrity under fire conditions IEC60331 - Line integrity tests for cables under

Brand Name:ZL

Model Number:ZL-1012

Place of Origin:China

...mm thickness for testing purposes. Specifications The machine consists of two parallel rollers with positive drive and a front-mounted blade. The sample passes through the rollers and is sliced by the blade. The distance between the roller and ...

Brand Name:AI

Model Number:AIC6223A

Place of Origin:China

...Test Machine is suitable for repeated U-shaped bending fatigue testing of high flexible cables such as TUV, VDE, UL, etc., in applications that require continuous bending and high-speed movement, such as internal wiring of machines, high-speed drag chain system cables, connecting cables of machine moving parts, internal wiring of machines, as well as repeated bending fatigue testing...

Brand Name:ZL

Model Number:ZL-2112

Place of Origin:China

...Cable Torsion Strength Testing Machine, Automatic Cable Tester Product Overview Automatic Wire and Cable Torsion Tester is designed for determining the plastic deformation ability and detecting surface and internal defects in metal wires with diameters ranging from 0.1-10.0mm, supporting both one-way and two-way torsion testing. Technical Specifications Parameter Specification Product Name Automatic Wire and Cable...

Brand Name:I-SUNTOP

Model Number:is-4578PO

Place of Origin:china

... electronic universal testing machine is a high-precision, multi-purpose material testing machine that tests the mechanical properties of various metal materials, non-metal materials, composite materials, and polymer materials in the state of tension,

Brand Name:Herrman

Model Number:GLW-30

Place of Origin:China

...cable tension testing machine tension tester Description The equipment is used to test optical cable tensile properties within the prescribed tensile load (that is usually tensile properties during installation), that means optical fiber attenuation, optical fiber strain, and function relation of optical cable...

Brand Name:Infinity Machine Inc.

Model Number:C5092

Place of Origin:Made In China

...Cable Cycle Tester Cables Conductor Cyclic Bending Test Machine IS0 19642-2:2023(E) SFF 8417 Multi-core Cable Bending Cycle Testing Machine Test Speed 13rpm Model:C5092 Purpose: Cable bending test machine is suitable for the bending testing of the multi-wires cable, communication cable, earphone cable etc. The testing method is short -circuit connecting one end cable...

Brand Name:AI

Model Number:FIPEC

Place of Origin:CHINA

...Cable Vertical Flame Spread Testing Machine Introduction EN 50399 specifies the tester and methods of test for the assessment of vertical flame spread, heat release and smoke production of vertically-mounted bunched wires or cables, electrical or optical, under defined conditions. EN 50399 details the test machine...

Brand Name:ZL

Model Number:ZL-1009

Place of Origin:China

...Cable And Wire Elongation Test Machine Used For Aluminum Copper Iron The ZL-1009 wire and cable tester is designed for measuring elongation in aluminum, copper, iron, and other metal materials. This advanced testing equipment utilizes sophisticated electronic sensing technology and software programming to automatically calculate and display elongation percentages with high precision. Tester Overview This elongation testing machine...

Brand Name:Infinity Machine

Model Number:C5092

Place of Origin:Made In China

... cable, earphone cable etc. The testing method is short -circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rotation, to check the cable if conducting after some

Brand Name:Infinity Machine

Model Number:C5092

Place of Origin:Made In China

...Cable 90° Bending Testing Cable Flex Cycle Test Machine Model:C5092 Purpose: Cable bending test machine is suitable for the bending testing of the multi-wires cable, communication cable, earphone cable etc. The testing method is short -circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rotation, to check the cable...

Brand Name:Infinity Machine

Model Number:C5092

Place of Origin:Made In China

...Cables Flex Cyclic Testing Machines Model: C5092 Purpose Road vehicles automotive cables cyclic cable bending test machines are designed for bending testing of multi-wire cables, communication cables, earphone cables, and similar products. The testing method involves short-circuit connecting one end of the cable and fixing it on the rotation plate, applying weight to the cable...

Brand Name:Infinity Machine Inc.

Model Number:C5092

Place of Origin:Made In China

...Cable Cyclic Bending Test Machine IS0 19642-2:2023(E) SFF 8417 Multi-core Cable Bending Cycle Testing Machine Model:C5092 Purpose: Cable bending test machine is suitable for the bending testing of the multi-wires cable, communication cable, earphone cable etc. The testing method is short -circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable...

Brand Name:Infinity Machine

Model Number:C5092

Place of Origin:Made In China

...Cables Cyclic Test Machine Model: C5092 Purpose This automotive cable bending test machine is designed for cyclic bending testing of multi-wire cables, communication cables, earphone cables, and similar products. The testing method involves short-circuit connecting one end of the cable, fixing it on the rotation plate, applying weights, and performing left-right rotation cycles to evaluate cable...