density test method

Brand Name:kingpo

Place of Origin:china

...the live parts of the lamp string becoming accessible which are caused by the frictions. Technical parameters: The test device is conform to the IEC60598-2-20 clause 113,Fig 2. It is made of stainless steel. Weights: one 15 N and one 30 N Test method: The

Brand Name:kingpo

Place of Origin:china

... compliance; through the tester current measurement, it can determine whether the test conditions meet the "standard". Test Methods 1.1. According to the IEC 61347-1:2012 standard, clause 14.6 a requires that the circuit be connected, as shown in

Brand Name:kingpo

Model Number:ISO 16750-4-figure4

Place of Origin:china

ISO 16750-4 Figure 4 Stainless Steel Test Set - Up For Splash Water Test Jet 5.4.2 Splash water test 5.4.2.1 Test method Heat the DUT in a hot air oven at Tmax for the specified holding time,th. Then splash the DUT with ice water for 3 s. If the DUT is ...

Brand Name:kingpo

Model Number:CAN/CSA-C358-03-Figure 1

Place of Origin:china

...test methods for household electric ranges Oven and Cooktop Test Blocks Cooktop test blocks Oven test block* Small Large Diameter(mm) 158±1.3 158±1.3 228.6±1.3 Appropriate height (mm) 71 71 76 Weight (kg) 3.85±0.05 3.85±0.05 8.62±0.05 Surface roughness(µm) rms 0.8 0.8 0.8 *The oven test...

Brand Name:kingpo

Model Number:IEC62368-1-cl.8.5.5.2

Place of Origin:china

...test is performed as follows: – lamp assemblies considered MS3 parts during field replacement are tested separate from the equipment; – lamp assemblies only considered MS3 parts during operation, may be tested separately,or as normally installed in the

Brand Name:SANWOOD

Model Number:SM-KS-Series

Place of Origin:GUANGDONG,CHINA

... testing equipments for electric and electronic products-Temperature testing equipments GB/T2423.1-2008(IEC60068-2-1:2007)Environmental testing - Part 2: Test methods - Tests A: Cold GB/T2423.2-2008(IEC60068-2-2:2007)Environmental testing for electric and

Brand Name:Kenton

Model Number:WGD-100

Place of Origin:China

...Test Chambers Stability Test Chamber For Laboratory WGD High&low temperature test chamber(WGD series): suitable for basic environmental regulations to electrical and electronic products. Test A: Low temperature test method, Test B: High temperature test method. Conduct low temperature and high temperature tests on products. test...

Brand Name:HAIDA

Model Number:HD-B604B-S

Place of Origin:Guangdong, China (Mainland)

... Test ASTM D3574 Test B1, ISO 2439: IFD Test ASTM D3574 Test H: Resilience (Ball Rebound) Test ASTM D3574 Test I3: Dynamic Fatigue Test by Constant Force Applications: Tested sample: laminated materials, wood, leather, rubber & plastic, metal material,

Brand Name:HongCe

Model Number:NF-2

Place of Origin:China

...Testing Equipment Needle Flame Test Standard: IEC 60695-11-5 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance Application: This part of IEC 60695 specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess the fire hazard by a simulation technique. The results of this test

Brand Name:LONROY

Place of Origin:Guangdong, China

... Wheat Hardness Index Analyzer Product Description Brief Introduction The wheat hardness index tester uses high-density, high-performance imported surface-mount components to replace traditional electronic components, improving product performance and

Brand Name:YUYANG

Model Number:YY218

Place of Origin:China

... of the foam plastic by horizontal combustion test method. For the determination of density of less than 250kg / m³ foam small sample combustion performance levels in a small flame. The PLC and touch screen can realize the intelligent measuring and

Brand Name:Infinity Machine

Model Number:RS-8000P

Place of Origin:Made in China

...Testing Machine For Concrete , Hardness Testing Machine Model: RS-8000P Application: This tester is suitable for the compression testing, the hardness testing and the fatigue testing of polyfoam, sponge of seats, because of using the programmable software for the control, and the servo motor for the driving, the tester can satisfy the A,B,C three type of testing methods...

Brand Name:Infinity Machine

Model Number:RS-1000-DA

Place of Origin:Made in China

...Test Chamber, Large Three-integrated Test Chamber Model: RS-1000-DA Purpose: This equipment applies to environmental simulation reliability tests such as high and low temperature constant and gradual, abrupt, damp heat test of all kinds of electrical and electronic products and other products, parts and materials. Test standard: ● GB/T2423.1-2008 (IEC60068-2-1:2007) Low temperature test method...

Brand Name:Infinity Machine

Model Number:ID6001

Place of Origin:Made In China

...Testing Machine Model Number:ID6001 Application of equipment: It is suitable for product packaging boxes to simulate the slope impact test caused by the package tilting and sliding during transportation or dock handling to test the reliability of the packaging. Testing standard: =ASTM D880 Standard Test Method for Impact Testing...

Brand Name:AI

Model Number:SCT-I

Place of Origin:China

...Content Tester Lamp Method Summary The sulphur content tester is designed and made as per the national standard of People's Republic of China GB/T380 Standard Test Method for Sulfur Content in Petroleum Products (Lamp Method). It is used to determine the ...

Brand Name:AI

Model Number:WTM

Place of Origin:China

...-2011 “Bituminous Mixtures Sample Making Method (Wheel-grind Method)” in the Industry Standard of People’s Republic of China JTG E20-2011 Standard Test Methods for Bitumen and Bituminous Mixtures for Highway Engineering. It is suitable to mill ...

Brand Name:Advanced Instruments

Model Number:AIC-30011

Place of Origin:China

...Method) is designed and manufactured according to the requirements specified in the industry standard SH/T 0170 of the People's Republic of China, "Determination of Carbon Residue in Petroleum Products (Electric Furnace Method)". It is suitable for determining the carbon residue of lubricating oils, heavy liquid fuels, or other petroleum products using the test method

Brand Name:Advanced Instruments

Model Number:AIC-0193

Place of Origin:China

... of oxidation stability-Rotating pressure vessel method and ASTM D2272 Standard test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel. The Automatic Lubricating Oil Oxidation Stability Tester is used to ...

Brand Name:Advanced Instruments

Model Number:AIC-0059B

Place of Origin:China

... test method for evaporation loss of lubricating oils by the Noack B method.It's suitable to determine lubricating oil. Product Advantages 1. Intelligent Interactive Interface 1).Equipped with a 7-inch full-color high-...

Brand Name:HongCe

Model Number:HT-I25

Place of Origin:China

....102 Test Finger Probe 75mm±5mm Spheroid Probe Test Standard of Test Finger Probe: IEC60335-2-24 This test probe conforms to IEC60335-2-24 Clause 21.102. It is used for protection test on the lamps of household appliances. Test method of Test Finger Probe...