check plug socket tester

Brand Name:PEGO

Model Number:BS1363-1

Place of Origin:China

...Socket Tester Temperature Rise Test Apparatus Figure number Description BS1363-1 Fig.1 Test pin BS1363-1 Fig.2a. Apparatus for mechanical strength test on resilient covers BS1363-1 Fig.2b Hardwood block for figure 2a BS1363-1 Fig.5 BS1363-1 Fig5 BS1363-1 Fig.7 Mounting plate BS1363-1 Fig.8 Plug pin deflection test apparatus for resilient plugs BS1363-1 Fig.9 Apparatus for abrasion test on insulating sleeves of plug...

Brand Name:PEGO

Model Number:PG-WDF

Place of Origin:China

Plug Socket Withdrawal Force Testing Equipment According to IEC60884-1 and VDE620 1. Introduction Maximum and minimum withdrawal force testing equipment is designed according to IEC60884 figure 18/19 and VDE0620, it is applied to evaluate the maximum and minimum pull-out force of the socket. The apparatus is suitable for plugs and sockets with rated voltage not exceeding 250V and rated current less than 16A. 2. Parameters Standard test plugs...

Brand Name:CHX

Model Number:CHX-ST001

Place of Origin:CHINA

... the wiring status of the socket quickly and accurately. 5. Widely used in the school, laboratory, factory and other social fields. Specifications: Plug standard: US plug Operate voltage: 90- 250V/45 - 65Hz Measure voltage:90 - 250V/45 - 65Hz Accuracy:

Brand Name:CHX

Model Number:CHX-ST001

Place of Origin:CHINA

... the wiring status of the socket quickly and accurately. 5. Widely used in the school, laboratory, factory and other social fields. Specifications: Plug standard: US plug Operate voltage: 90- 250V/45 - 65Hz Measure voltage:90 - 250V/45 - 65Hz Accuracy:

Brand Name:KingPo

Place of Origin:China

... Plug Socket Tester GOST 7396.1-89 IEC 83-75 Group C Socket Measure Product information: This testing device conforms to GOST 7396.1-89 (IEC 83-75), Group C figure 1 and figure 2. The gauge in figure 1 is used for verify the interchangeability of plugs,

Place of Origin:China

Brand Name:HongCe

...Plug and Socket Product information: Some measuring gauges are designed and manufactured by Hongtong Electromechanical Co., Ltd. These measuring gauge confirm to the standard of GB2099.1-2008 clause9,GB1002-2008 and GB1003-2008 which are used for the dimensional measurement and verification of the plug socket...

Place of Origin:China

Brand Name:KeRang

... for checking socket of rated current is not bigger than 16A and the voltage is not bigger than 250V. Its principle is to see whether there will be any damage to the socket in the standard sense when the electrical appliances insert to the socket and ...

Place of Origin:China

Brand Name:KeRang

Clamping Device Test Machine CL-2 Product overview: This testing machine is also called the test apparatus for checking damage degree of wire which confirms to many standards such as IEC884,IEC60947 and so on. This compliance is used for judging whether...

Brand Name:HongCe

Place of Origin:China

...Plug And Socket Gauge For Measuring German Standard Plug And Socket Product information: The gauges conforms to the standard of DIN-VDE0620-1.It is measuring German standard plug and socket. Figure number Project name Number DIN-VDE0620-1-Lehre1 Socket R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum pull out force of contact jack 2 DIN-VDE0620-1-Lehre3 Bipolar plug...

Place of Origin:China

Brand Name:KeRang

...Plug-Socket Endurance Tester SLT-2 Product overview: This device complies with standard terms of 20, 21 in IEC884-1(figure 16) and IEC60669-1 as well as IEC61058-1. It is used for the on-off ability test and the normal operation lifespan test of the Switches for household and similar fixed-electrical installations. Besides, it is also applied in the test of breaking volume of plug and socket...

Brand Name:PEGO GROUP

Model Number:PG-TB3

Place of Origin:China

BS1363-1 Figure 20 Plug Socket-Outlet Tumbling Barrel Made by Thick Plywood 1. Introduction Tumbling barrel is designed according to BS1363.1 figure 20 for plug ballast, transformers and socket outlet. The tumbling barrel is turned at a rate of five ...

Place of Origin:China

Brand Name:HongCe

Model Number:CR-1

IEC60884 Figure 20 Apparatus For Cord Retention Testing Product details: This device conforms to the standard requirement of IEC60884 figure 20. It is for testing cord retention is for check the effectiveness of the retention of the cable of the cord ...

Place of Origin:China

Brand Name:HongCe

Model Number:MG-1

IEC60884-1 Figure 32 Measure Gauge For Covering Plate Product information: This device conforms to the standard of IEC60884-1 figure 32. It is used to check the contour line of the cover or the cover plate, Technical parameters: Material: stainless steel ...

Brand Name:HongCe

Model Number:CR-6

Place of Origin:China

Flexible Cable Cord Retention Force Test Apparatus IEC60884 Figure 20 , VDE0620 Product details: HongTong has customzied a 6 workstations flexible cable cord retention test apparatus, it well meets our customer's special testing requirements. The cord ...

Brand Name:PEGO

Model Number:PG-PL

Place of Origin:China

IEC60884-1 30A Power Load Cabinet used for Plug Socket Life Tester 1. Introduction: Power Load cabinet is a support equipment designed according to IEC60884-1 and UL1054, it is applied to simulate the electrical appliance in charged state, then to do the ...

Brand Name:kingpo

Place of Origin:china

...plug and socket gauge Figure number Project name Number DIN-VDE0620-1-Lehre1 Socket R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum pull out force of contact jack 2 DIN-VDE0620-1-Lehre3 Bipolar plug force 1 DIN-VDE0620-1-Lehre4 Bipolar plug...

Brand Name:kingpo

Place of Origin:china

...plug and socket gauge Figure number Project name Number DIN-VDE0620-1-Lehre1 Socket R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum pull out force of contact jack 2 DIN-VDE0620-1-Lehre3 Bipolar plug force 1 DIN-VDE0620-1-Lehre4 Bipolar plug...

Brand Name:kingpo

Place of Origin:china

...plug and socket gauge Figure number Project name Number DIN-VDE0620-1-Lehre1 Socket R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum pull out force of contact jack 2 DIN-VDE0620-1-Lehre3 Bipolar plug force 1 DIN-VDE0620-1-Lehre4 Bipolar plug...

Brand Name:kingpo

Place of Origin:china

...plug and socket gauge Figure number Project name Number DIN-VDE0620-1-Lehre1 Socket R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum pull out force of contact jack 2 DIN-VDE0620-1-Lehre3 Bipolar plug force 1 DIN-VDE0620-1-Lehre4 Bipolar plug...

Brand Name:PEGO GROUP

Model Number:PG-SEV1011

Place of Origin:China

... B and Gauge C are used to verify the contact making of socket-oulets and plugs with plug pins with sleeves 2. Introduction The plug and Socket test gauge is completely designed according to SEV1011, they are made of high-hardness alloy, and handle with