channel isolated 8 input rtd modules

Brand Name:ABB

Model Number:AI825

Place of Origin:China

.... Each channel can be either a voltage or current input. The module has a direct current input that withstand up to 6.3 V and a over voltage protected current input that withstand up to +30 V d.c. The current is limited by a PTC resistor. Power to the

Brand Name:ABB

Model Number:AI825

Place of Origin:China

.... Each channel can be either a voltage or current input. The module has a direct current input that withstand up to 6.3 V and a over voltage protected current input that withstand up to +30 V d.c. The current is limited by a PTC resistor. Power to the

Brand Name:MITSUBISHI

Model Number:A1S62PN

Place of Origin:Japan

... C1604-1989, DIN 43760-1980], JPt100 [JIS C1604-1981]), conversion speed: MITSUBISHI A1S62PN 40 ms/channel, 20-point terminal block. Product: Temperature input a1s62pn Module. Model:

Brand Name:Emerson

Model Number:DI 120 V AC Isolated

Place of Origin:America

DeltaV™ DI 120 V AC Isolated Plus CHARM Eliminate marshalling and add I/O anywhere in the plant Specifications Detection Level for On > 84 V AC Detection Level for Off < 34 V AC Wetting Current 10 mA at 120 V AC Input Impedance 12 kΩ (approximately) ...

Brand Name:Bently Nevada

Model Number:3500/65-01-01

Place of Origin:USA

... temperature detector (RTD) and isolated tip thermocouple (TC) temperature inputs. The monitor conditions these inputs and compares them against user-programmable alarm setpoints. The monitor is programmed using the 3500 Rack Configuration Software. You

Brand Name:AB

Model Number:1785-BCM

Place of Origin:USA

...module Description for 1794-IRT8 Flex I/O combination module: The AB 1794-IRT8 is a Flex I/O combination module. This module supports both RTD and Thermocouple sensors. It has Eight (8) channels in Two (2) groups of Four (4) with nominal input ranges of -40…100 mV dc for thermocouples for Thermocouple and 0…325 mV for RTDs for RTD. This module...

Brand Name:DECOWELL

Model Number:EX-300H

Place of Origin:China nanjing

...channel DO module,NPN EX-300H Product name EX-300H Current Consumption 72mA Number of Input Channel 16 Input Signal Type NPN Rated Input Voltage NPN:0V DC(±3%) Single-channel Rated Current Max:0.5A (Total Output Current of 8 Channels at the same time:2A) Load type Resistive load, inductive load, lamp load Isolated withstand voltage 500V Debounce time Configurable :1 ～ 10ms, Default :3ms Isolated withstand voltage 500V Isolation...

Brand Name:DECOWELL

Model Number:EX-4154

Place of Origin:China nanjing

...Input Module 4-channel AI module ±10V 16bit accuracy 0.02% EX-4154 Product name 4-channel 16-bit voltage analog input (±10V/±5V) Current Consumption 82mA Number of Input Channel 4 Analog range ±10V/±5V Filtering grade Configurable:0-3,Default:1 Input resistance > 500KΩ Resolution 16bit Precision 0.05% Isolated withstand voltage The 500V channels on the field side and the digital side are not isolated...

Categories:IGBT Module

Country/Region:china

...Hole Number of Outputs: 1 Output Output Power: 600 W Input Voltage, Nominal: 375 V Input Voltage - Min: 250 V Input Voltage - Max: 425 V Output Voltage-Channel 1: 48 V Output Current-Channel 1: 12.5 A Output Voltage-Channel 2: - Output Current-Channel 2: -

Brand Name:MITSUBISHI

Model Number:AJ65SBT2B-64RD3

Place of Origin:Japan

...-64RD3 Model: AJ65SBT2B-64DA 4-channel MITSUBISHI Analog Temperature input module . voltage/current output . D/A conversion module (analog output module). Screw MITSUBISHI Analog Temperature input module terminal block type Model: AJ65SBT2B-64TD 4-channel.

Categories:PLC Spare Parts

Country/Region:china

...ISOLATED CONTROL A/D AutoMax Multibus system 2-Channel Analog Input Module Made in USA Product description: Attribute Description Brand Reliance Electric Model Number 57C409 Function 2-Channel Analog Input Module Input Channels 2 analog input channels Input Type Analog Input Voltage Range Typically compatible with standard analog signal levels (e.g., 0-10VDC, 4-20mA) The Reliance Electric 57C409 2-Channel...

Brand Name:DECOWELL

Model Number:EX-3008

Place of Origin:China nanjing

Product name EX-3008 Current Consumption 50mA Number of Input Channel 8 Input Signal Type NPN Rated Input Voltage NPN:0V DC(±3%) Single-channel Rated Current Max:0.5A (Total Output Current of 8 Channels at the same time:2A) Load type Resistive load, ...

Brand Name:Honeywell

Model Number:CC-PDIL01

Place of Origin:USA

...Module 24V Digital Input CC-PDIL01 51308386-175 Circuit Card QUICK DETAILS Digital Input Module Voltage :24V 51308386-175 DESCRIPTION Digital Input Module PWA Module MEASUREX Manufacturer’s Declared Parameters Input / Output Model CC-PDIL01 – 24Volt Digital Input Input Channels 32 Galvanic Isolation (any input terminal voltage referenced to common) 1500 VAC RMS or ±1500 VDC Isolation...

Brand Name:ABB

Model Number:DI802

Place of Origin:China

...Module DI802-eA 3BSE022364R2 Digital Input Module Description of DI802: The DI802 is an 8 channel 120 V a.c./d.c.digital input module for the S800 I/O. This module has 8 digital inputs. The a.c. input voltage range is 77 - 130 volt and the input current is 10 mA at 120 V a.c. The d.c. input range is 75 - 145 V and the input current is 2.8 mA at 110 V. The inputs are individually isolated. Every input channel

Brand Name:ABB

Model Number:DI803

Place of Origin:China

...Input Module DI803 3BSE022362R1 S800L I/O Module DI803-eA 3BSE022362R2 Description of DI803: The DI803 is an 8 channel 230 V a.c./d.c.digital input module for the S800 I/O. This module has 8 digital inputs. The a.c. input voltage range is 164 - 264 volt and the input current is 7.6 mA at 230 V a.c. The d.c. input range is 175 - 275 V and the input current is 1.6 mA at 220 V. The inputs are individually isolated. Every input channel

Brand Name:ABB

Model Number:DI828

Place of Origin:USA / FI etc

...Module 3BSE069054R1 DIGITAL INPUT MODULE DI828 120 V a.c. / d.c 16CH Description of DI828: The DI828 is an 16 channel 120 V a.c/d.c. digital input module for the S800 I/O. The module has 16 digital inputs. The AC input voltage range is 77 - 130 V and the input current is 8.5 mA at 120V AC. The DC input voltage range is 75 - 130 V and the input current is 2.4 mA at 120V DC. The inputs are individually isolated. Every input channel

Brand Name:ABB

Model Number:DI802

Place of Origin:China

...Module DI802-eA 3BSE022364R2 Digital Input Module Description of DI802: The DI802 is an 8 channel 120 V a.c./d.c.digital input module for the S800 I/O. This module has 8 digital inputs. The a.c. input voltage range is 77 - 130 volt and the input current is 10 mA at 120 V a.c. The d.c. input range is 75 - 145 V and the input current is 2.8 mA at 110 V. The inputs are individually isolated. Every input channel

Brand Name:Emerson Spare Parts

Model Number:FBM207C P0917GY

Place of Origin:USA

...ISOLATED Fast shipping Product Description: Hardware Channel Isolated, Voltage Monitor/Contact Sense Input Interface Module (FBM207/FBM207b/FBM207c) GENERAL DESCRIPTION The Channel Isolated, Voltage Monitor/Contact Sense Input Interface Module (FBM207/FBM207b/FBM207c) functions as a 16-channel dc voltage monitor or 16-channel contact sensor. Each channel accepts a 2-wire input...

Brand Name:LS

Model Number:LS-TD4015

Place of Origin:China

... standard RTD acquisition product that supports PT100, PT1000, Cu50, Cu100, Ge53, BA1, BA2, R5000 and R500 6-channel three-wire RTD inputs. RS485 interface is optoelectronic isolated. AD acquisition part is also modulus optoelectronic isolated. It adopts...

Brand Name:ABB

Model Number:AI893

Place of Origin:China

...Input Module AI893 PR:C New Original Description of AI893 : The AI893 Analog Input Module has 8 channels. The module includes Intrinsic Safety protection components on each channel for connection to process equipment in hazardous areas without the need for additional external devices. The module can be configured for either 2 or 3-wire RTD sensors or for TC sensors. In TC mode, channel...