Brand Name:CHENGFENG

Model Number:CF8356

Place of Origin:China

Brief introduction The plastic impact embrittlement temperature tester is used to determine the highest temperature at which a sample of a material is damaged under specified conditions due to impact, which is the embrittlement temperature. It can be used...

Brand Name:CHENGFENG

Model Number:CF8352

Place of Origin:China

Basic principle: Under the influence of damp and impurity environments, electrical products may experience insulation leakage between live parts of different polarities or between live parts and grounded metals. The generated electric arcs can cause ...

Brand Name:CHENGFENG

Model Number:CF8353

Place of Origin:China

It is mainly used for the determination of impact toughness of hard plastics, thermoplastics and thermosetting plastics, filled and micro-reinforced plastics, as well as the plates of these plastics, including laminated plates and other materials. For ...

Brand Name:CHENGFENG

Model Number:CF8383

Place of Origin:China

I. Product Overview Assessment of fire hazard caused by thermal stress in a short period of time due to heat sources such as hot components or overloaded resistors using simulation technology Sure. This machine is also applicable to electrical equipment...

Brand Name:CHENGFENG

Model Number:CF8386

Place of Origin:China

It is applicable to the determination of impact toughness of non-metallic materials such as hard plastics, reinforced nylon, fiberglass reinforced plastics and electrical insulating materials. This product has a wide measurement range. The double-layer ...

Brand Name:CHENGFENG

Model Number:CF8534

Place of Origin:China

It is mainly used for the determination of heat deformation and Vicat softening point temperature of polymer materials (such as plastics, rubber, nylon, electrical insulating materials, etc.). Complies with the requirements of standards such as GB/T8802-...

Brand Name:CHENGFENG

Model Number:CF8544

Place of Origin:China

With the specified indenter, apply the initial test force first, then the main test force, and then return to the initial test force. Conduct two initial tests in sequence The value obtained from the difference in the depth of the indenter's ...

Brand Name:CHENGFENG

Model Number:CF8382

Place of Origin:China

This large combustion cabinet is produced strictly in accordance with UL1581 SECT1080.1-1080.14 standards and has been approved by Guangzhou meihua UL company. It fully complies with VW-1 (V-ertical-specimen) Flame Test combustion test standards. ...

Brand Name:CHENGFENG

Model Number:CF8304

Place of Origin:China

I. Usage: A device that tests the electrical resistivity of a conductor (such as wires and cables) per unit length by hand, usually used in laboratories and wires At the production site, there are departments in charge and wire and cable sellers. Conductor...

Brand Name:CHENGFENG

Model Number:CF8322

Place of Origin:China

I. Product Introduction This testing machine complies with GB/T4909.5-2009 and GB/T238-2002. It is mainly used for repeated bending tests of metal wires, including steel, aluminum and copper, to inspect the performance of metal wires under plastic ...

Brand Name:CHENGFENG

Model Number:CF8337

Place of Origin:China

This machine complies with GB8410, American standard FMVSS571.302 and DIN7520 "Combustion Characteristics of Automotive Interior Materials". Place the sample horizontally on the U-shaped bracket. In the combustion chamber, ignite the free end of ...

Brand Name:CHENGFENG

Model Number:CF8337

Place of Origin:China

Core definition and application Main application: To detect the thickness of fiberglass reinforced plastic (FRP) core rods or insulation layers of composite insulators (such as line insulators, electrical equipment insulation tie rods, etc.) during ...

Brand Name:CHENGFENG

Model Number:CF8347

Place of Origin:China

This testing machine is used to detect the insertion force and extraction force of various connectors. It has a continuous insertion and extraction function. The number of insertions and removals can be set arbitrarily. That is, the machine will ...

Brand Name:CHENGFENG

Model Number:CF8349

Place of Origin:China

I. Product Overview: This equipment is a test device used to evaluate the ability of directly installed bundled wires, cables or optical cables to suppress the vertical spread of flames under specified conditions. The equipment casing is made of all SUS304...

Brand Name:CHENGFENG

Model Number:CF8381

Place of Origin:China

Manufactured and produced in accordance with the national standards GB/T19216.11-2003 and IEC60331-11. The test instrument is used to test the ability of wires and cables to operate continuously in a specified state under certain fire sources and for a ...

Brand Name:CHENGFENG

Model Number:CF8402

Place of Origin:China

It is used for tensile tests of insulation sheaths of polymer materials, wires and cables, rubber, plastics, etc. in low-temperature environments, in compliance with standards: This device complies with test standards such as GB/T 2951.4, VDE 0472Part616...

Brand Name:CHENGFENG

Model Number:CF8407

Place of Origin:China

... test: Sample diameter: Aluminum wire Φ1.25-Φ6.00mm, steel wire Φ1.25-Φ3.80mm Mandrel diameter: Φ1.25-Φ19.00mm Spindle speed: ≤8r/min 4. Displacement distance of the right shaft head: ≥40 Overall speed ratio: ...

Brand Name:CHENGFENG

Model Number:CF8419

Place of Origin:China

The mine cable transition resistance tester is developed in accordance with the technical requirements of the national standard GB12972 and meets the test requirements of MT818.1-2009. It is a dedicated instrument for detecting the transition resistance...

Brand Name:CHENGFENG

Model Number:CF8422

Place of Origin:China

I. Equipment Overview: This equipment is used to determine whether cables and optical cables can continuously operate in the specified state when burning under the specified fire source and time Ability. Ii. Compliance with Standards This testing machine ...

Brand Name:CHENGFENG

Model Number:CF8435

Place of Origin:China

plug-in bending testing machine (Power connection port Bending testing machine) is strictly designed in accordance with DIN VDE0620-1-23.4 standard. It complies with the test standards of GB2099, GB4706, GB5013, GB5023 and the Japanese standard JWDS, and...