Interconnected Photoelectric Smoke Alarm Detector 95%RH Humidity
|
...fire ground and timely send out the alarm signal. Passed EN14604 certificate. Suit for home, hotel, office, etc. Features: Photoelectric technology Delicate new design 5 years battery life Measuring gas: smoke Alarm sound: ≥85dB(3m) Technical parameters:...
Zhengzhou Tuohai Technology Co., Ltd.
|
Standalone wired optical smoke sensor
|
...buzzer, alarm independently 5. Simulate alarm test 6. Low voltage alarm when it less than 6.8V Technical Parameters 1. Working volatage:9V 2. Static current: ≤10uA 3. Alarm current: ≤12mA 4. Low power alarm 5. Alarm volume: ≥85dB 6.Temperature range:...
JSUS ELECTRONIC TECHNOLOGY CO.,LIMITED
|
3V WiFi Smoke Detector 400mA Tuya Smoke Alarm Network Low Power Consumption
|
...Smoke Sensor, Fire Alarm Sensor, 85db Alarm Alert, 3 Years Battery Life The optical sensing principle is adopted to accurately perceive the smoke density at smouldering fire. When the smoke density or indoor temperature reaches the alarm threshold, 85dB buzzer will be triggered immediately. At the same time, the red light will flash quickly and the alarm......
SHENZHEN MULTI IR TECHNOLOGY CO., LTD.
|
2 loops Early smoke detection Aspirating Smoke Alarm For Fire Safety system
|
...alarm for early fire (overheating, smoldering, or low heat radiation and aerosol generation). the alarm is several hours ahead of traditional fire detection, it can minimize the fire damage. this detector use advanced gas detection technology, laser optical technology and microprocessor control technology, combined with high-end smoke sampling and detection alarm device to achive high sensitivity alarm......
Shenzhen Xinhe'an Technology Co., Ltd.
|
Smoke sensor
|
...Smoke sensor, wired, with 9V working voltage Main Parameter Optical standalone smoke detector Standalone surface mounted, easy operate Built-in IC card, stable performance, high sensitivity Apply optical smoke test room With buzzer, alarm independently Simulate alarm test Low voltage alarm when it less than 6.8V Technical parameters: Working volatage: 9V Static current: ≤10uA Alarm current: ≤12mA Low power alarm...
Shandong China Coal Group
|
Smoke sensor
|
... sensitivity Apply optical smoke test room With buzzer, alarm independently Simulate alarm test Low voltage alarm when it less than 6.8V Technical parameters: Working volatage: 9V Static current: ≤10uA Alarm current: ≤12mA Low power alarm Alarm volume:...
Shandong China Coal Industry & Mining Group Co.,Ltd
|
LZ-1902 Independent photoelectric smoke detector\Standards：EN 14604:2005/AC:2008/AS 3786:2014
|
... smoke detector, which is one of the smoke alarm series products. The alarm adopts optical smoke inductive device and excellent production technology, stable work, beautiful appearance, simple installation, no need to debug, can be widely used in ......
Shandong Jvante Fire Protection Technology Co., Ltd.
|
Fire alarm battery powered smoke detector with buzzer alarm
|
...alarm battery powered smoke detector with buzzer alarm 1.Unit Size:Φ107X44mm 2.Working Current: 1-Static Current: ≤10μA 2-Alarm Current: ≤12mA 3.Operation Voltage: DC 9V Battery 4.Alarm Sound: ≥85dB(3m) 5.Ambient Temperature: -10°C～+60°C 6.Ambient Humidity: ≤95%RH 7.Sensor: Optical......
Jingo International CO., LTD
|
Fire alarm battery powered smoke detector with buzzer alarm
|
|
...alarm battery powered smoke detector with buzzer alarm 1.Unit Size:Φ107X44mm 2.Working Current: 1-Static Current: ≤10μA 2-Alarm Current: ≤12mA 3.Operation Voltage: DC 9V Battery 4.Alarm Sound: ≥85dB(3m) 5.Ambient Temperature: -10°C～+60°C 6.Ambient Humidity: ≤95%RH 7.Sensor: Optical......
Shenzhen KINGUI Limited
|
Fire Alarm System Reflective Optical Beam Smoke Detector
|
Model Number TX6701 Fire Detection and Alarm Systems Specifications Operating Voltage 20 V to 28 V DC Current Parameters Standby:23mA Commission:40mA Alarm:33mA Beam Sensor Sensitivity Level 1: 2.6 dB High Sensitivity Level 2: 3.4 Medium Sensitivity Level......
Yiwu Yidun E-commerce Firm
|