Low Temperature Impact Test Device LTI-1 IEC60884 Use With Cryostat
|
...fit for impact test of wire while the latter one is applied for the impact test of plug, socket, switch, wire and electrical conduit. Technical parameters: This device is used with the cryostat. It should be put in the sponge-rubber pad of 40mm-thickness....
shanghai kerang technology co ltd
|
Low Temperature Impact Test Device with VDE 0472 IEC 884-1 CQC 1147 Standars
|
... Compliance This device complies with multiple international standards including GB 2951.14.8.2-2008, GB 2099-2008, VDE 0472, IEC ......
Dongguan Zhongli Instrument Technology Co., Ltd.
|
IEC 60811-1-4 Compliant Low Temperature Impact Test Apparatus with 100 mm Drop Height and Single or Three Station Configuration
|
...Low Temperature Impact Test Apparatus (100 mm Drop Height) Product Overview The IEC 60811-1-4 Low Temperature Impact Test Apparatus is designed to evaluate the impact resistance of electrical cables, insulation, and sheath materials under low-temperature conditions. Compliant with IEC 60811-1-4 standard requirements, this device is widely used by cable manufacturers, third-party testing......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
1 Or 3 Stations Switch Life Tester IEC 60884-1 Figure 27 And 42 Power Cables Low Temperature Impact Test Apparatus
|
...Low Temperature Impact Test Apparatus Product information: The low temperature impact test apparatus meets the requirements of IEC 60884-1 2013 clause 24.4, 30.4, figure 27 and 42, IEC60811-1-4, VDE0620 and so on. This device is used to check the impact resistance at low temperature of electrical accessories, as well as wires and cables. Equipment characteristics: This device should be used with low temperature...
Sinuo Testing Equipment Co. , Limited
|
JBDW-C Auto low temperature impact testing machine
|
.... The pendulum of the machine can be raised or released automatically. It is designed according to national standard GB/T3808-1995 “Charpy Impact Test Method for Metals” and ISO standard. It can be also accordance with ASTM E23 standard as customer’s...
jinan hardness STING EQUIPMENT CO., LTD
|
Condenser Mode Air-cooled High and Low Temperature Impact Test Chamber with Safety Protection Device
|
Condenser Mode Air-cooled High and Low Temperature Impact Test Chamber with Safety Protection Device *, *::before, *::after {box-sizing: border-box;}* {margin: 0;}html, body {height: 100%;}body {line-height: 1.5;-webkit-font-smoothing: ......
Infinity Machine International Inc.
|
Liyi ASTM D1790 Low Temperature Impact Testing Machine, Charpy Impact Tester
|
...Low Temperature Impact Testing Machine, Charpy Impact Tester Product Description This impact tester is an instrument for testing the impact resistance of metal materials under dynamic loads. It can continuously conduct a large number of metal impact tests. It adopts full automatic control. The control system uses programmable logic controller (PLC) to control the whole process of swing taking and impact test......
Dongguan Liyi Environmental Technology Co., Ltd.
|
ISO 6722 SAEJ 1128 Automotive Electrical Wire Low Temperature Impact Testing Instrument
|
...Low-Temp Impact Test Apparatus SAEJ 1128 Vehicle Wire Low-Temperature Impact Tester Product Description Test standard ISO 6722, ISO 14572, ISO 19642, SAEJ 1128, QC/T 730, JASOD 611-2009 ISO 19642 6722 Automotive Electrical Wire Low-Temp Impact Test Apparatus SAEJ 1128 Vehicle Wire Low-Temperature Impact Tester Technical Specification Low-Temperature Impact......
DONGGUAN LONROY EQUIPMENT CO LTD
|
New Condition Plug Socket Tester Low Temperature Impact Test Apparatus IEC60884-1 Figure 42
|
...Low Temperature Impact Test Apparatus 1. Introduction of Low Temperature Impact Test Apparatus: Low temperature impact test apparatus is designed according to IEC60884-1 clause 30.4 figure 27 & figure 42, IEC60811-1-4, VDE0620, GB2951.4, GB2099.1 clause 24.4 and 30.4 figure 27 & figure 42 and etc. It is applied to do the impact test under the condition of low temperature......
Pego Electronics (Yi Chun) Company Limited
|
A333 Grade6 Low Temperature Impact Test Seamless Steel Tubes , Rectangular Steel Tube
|
.... Product application: suitable for -45℃～-195℃ grade low temperature pressure vessel pipeline and seamless steel pipe for low temperature heat exchanger pipeline. Product Name Carbon steel pipe Thickness 1 - 15mm or Customized Length 12M, 6m, 6.4M, 5...
WUXI SYLAITH SPECIAL STEEL CO.,LTD
|
Submit your “low temperature impact test device” inquiry in a minute :