CE Approval FFP2 Dust Face Mask , Pollution Dust Mask For Textile Industry

CE FFP2 Cup Mask ,Face Mask,Dust Particle Mask , Non-Woven Polypropylene

Directions for use

• The mask is only for single use .
• The mask should't be removed from its packaging until its required for use.
• Use the respirator in accordance with applicable health and safety regulations.
• Transport and stockage of unused masks should be such that the product is not stored in direct sunlight and in frost free conditions,not in contact with solvents and cannot be damaged by physical contact with hard surfaces/items.
• Fit the respirator and check leak-tightness before entering the contaminated area.
• Wear the respirator for the whole duration of exposure to contaminants.It should not be used for more than 8 hours continuously and should be discarded after use.
• As required by European Health and Safety requirements,the user is advised that when the mask is in contact with the wearer’s skin,it may cause allergic reaction to susceptible individuals.If this is the case,leave the hazard area,remove the mask and seek doctor’s advice.
• If maintained as per storage instructions , product can be used up to 5 years from date of manufacture.

Certification

This product has been tested according to the following European Standard:

EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking.

It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.

EU type examination certificate (module B) issued by BSI , notified body n°0086.The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product checks at random intervals (Module C2) set out in Annex VII under surveillance of BSI , notified body n°0086.

Product Features:

1. Breathable, light and environment-friendly;

2. High elasticity head strap help fit different users and dual point attachment helps provide a secure seal;

3. Soft nose cushion for easy and comfortable fit;

4. Adjustable nose piece for extra comfort;

5. Breathing valve enables easy breathing and helps avoid moisture fogging inside the mask;

Xiantao Xincheng Plastic Products Co.,Ltd specializes in the manufacture of disposable and nonwoven series, such as bouffant caps, face masks, shoe covers, boot covers, lab coats, coveralls, oversleeves, etc. We can do processing with imported materials and processing with supplied materials.We welcome your visiting anytime!

With over five years of regional manufacturing experience, advanced equipment, from selecting the raw materials to the processing with the imported materials, to testing product, a series of strict management system and clean production environment, we can produce any quantities as your needs, duplicate your existing package design, and also create a package design that will uniquely brand your company’s product.