Anti Pollution FFP2 Mask Asbestos , FFP2 Face Mask With Built In Sponge Strip Device

Anti Pollution FFP2 Mask Asbestos , FFP2 Face Mask With Built In Sponge Strip Device

1 . Descriptions

2 . Material of each layer

Outer layer : Protective needle punched cotton
Middle layde : FFP2 melt blown filter(have filter efficiency level of 94%)
Inner layer : Shaped needle punched cotton

3 . Certification

This product has been tested according to the following European Standard:

• EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking.It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.
• EU type examination certificate (module B) issued by BSI , notified body n°0086.The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product checks at random intervals (Module C2) set out in Annex VII under surveillance of BSI , notified body n°0086.

4 . Direction for use:

1. Fit the respirator and check leak-ight ness BEFORE en ten ng the contaminated area

2. Wear the respirator for the whole duration of exposure to contaminants.

3. Use the respirator in accordance with applicable health and safety regulations.

4. Discard the respirator and replace with a new one if*the respirator is re roved while in acontaminated area*excessive clogging of the respirator causes breathing dii culty ordiscomfort*the respirator becomes damaged*(for respirators protecting against vapours-thesmell of vapours present becomes detectable.

5. Leave the contaminated area if dizziness, irritation or other distress occurs.

6. Only for single use, No maintenance necessary.Do not store and/or re-use after single use.m Discard the respirator after single use(one shift, maximum) .

7. Keep un-used respirators in their closed box and store in a dry non-contaminated areabetween+2 and+55deg.

5. Protection level

FFP2 NR provides protection against non-toxic or low to moderately toxic solid and liquid aerosols having a concentration of up to 12 times

the TLV (threshold danger limit value) or 10 times the APF (assigned protection factor).

6 . Expiry date

If maintained as per storage instructions , products can be used up to 5 years from date of manufacture.

7 . FAQ

Q:Are you a manufacturer or a trading company?

A:We are a manufacturer located in Zhejiang,China. Welcome to visit our factory.

Q: Can you provide free samples?

A: All samples are provided freely, it will takes3-5 days to prepare the samples.

Q: How does your factory control the quality?
A: All manufacturing are absolutely base on the pre-production samples. Meanwhile, we have a complete after-sales system.

Q: Could you embossed printing the logo on the face mask?
A: Yes, we can embossed printing the logo on the surface of face mask, OEM production is ok.

Beijing Global Dowin Technology CO.,LTD is an exporter company specializing in personal protective equipment. Our products are directly from Chinese factories with CE and FDA certification.We have 27 branches across the country, and we inspect the cooperative factories every month.
n95dustmask.com is our global online wholesale platform which helps global buyers to buy personal protective equipment directly from China.
Our goods will be delivered to customers as fast as possible via DHL or UPS. Spot and low price are the core concepts of our platform.