8.0 Inch 1280*800 Sunlight Readable TFT LCD Display With 40PIN LVDS Interface

8.0 Inch 1280*800 TFT LCD Display With 40PIN LVDS Interface

YT080B006 is an 8.0" diagonal a-Si TFT-LCD display panel product, integrated WLED backlight system, no backlight driver, no touch screen. The operating temperature range is -10~60°C, and the storage temperature range is -20 ~ 70 °C. Its general characteristics are summarized as follows: portrait, WLED backlight.

General Specifications

Outline Dimension (unit: mm)

Related Products

PRECAUTIONS

1. HANDLING

1.1.Polarizer Cleaning, Petroleum ether (or N-hexane) is recommended for cleaning the front/rear polarizers and reflectors, acetone, toluene and ethanol are not allowed to avoid damaging the surface.

1.2. Body grounding, must wear Anti-ESD wrist strap while pick up LCDs.

1.3. FPC Soldering, less than 300℃/3S, solder must be grounding on grounding bench.

1.4. If use electric Screwdriver to do assembly, screwdriver must be grounding.

2. STORAGE

2.1. Keep in a sealed polyethylene bag.

2.2. Keep in a dark place.

2.3. Keep in temperature between 0°C and 35°C.

NOT allowed at 70°C for more than 160 Hours, or at -20°C for more than 48 Hrs.

3. SAFETY

If liquid crystal leak out of a damaged glass cell, DO NOT put it in your mouth or touch eyes, if the liquid crystal touch your skin or clothes, please wash it off immediately using soap and water.

4. LIMITED WARRANTY

Unless otherwise agreed between ADIA and customer, ADIA will replace or repair any of its LCD modules which are found to be functionally defective when inspected in accordance with ADIA LCD acceptance standards (copies available upon request) for a period of one year from date of shipments. Cosmetic/visual defects over specs must be returned to ADIA within 30 days of shipment. Confirmation of such date shall be based on freight documents. The warranty liability of ADIA limited to repair and/or replacement on the terms set forth above. ADIA shall not be responsible for any subsequent or consequential events.

4.1 RETURNING LCM UNDER WARRANTY – TERMS AND CONDITIONS

4.1.No warranty can be granted if the precautions stated above have been disregarded. The typical examples of violations are :

- Broken LCD glass.

- Circuit modified in any way, including addition of components.

4.2.Module repairs will be invoiced to the customer upon mutual agreement. Modules must be returned with sufficient description of the failures or defects. Any connectors or cable installed by the customer must be removed completely without damaging the PCB’s eyelet, conductors and terminals.

FAQ

Q1. How can I trust your product quality?

A:

--Our Raw materials are all ROHS compliant .

--Display is an ISO9001:2008 and ISO9001:2015 Certified company, we’ve been adhering to the ISO standards strictly in our production.

--Our products are 100% Visual and Function test before shipments.

Meanwhile, we do necessary Aging test and Reliability tests to our TFT Display modules, eg. Store and Operate in High and Low Temperature & High Humidity Environment, ESD and anti-interference test , Drop(with package) and Vibration Test.

Our Touch Screens goes through Salt spray test, Hardness test, Steel ball Drop test, Flatness test, Thermal shock test…

--Our experience and proficiency make the qualification rate always being 99.7% or above.

Q2. Which sizes of LCDs and Touch Panels do you provide?

A:

--Small sizes which include: 0.96”, 1.22”, 1.3”, 1.44”, 1.54”, 1.77”, 2.0”, 2.4”, 2.7”, 2.8”, 3.0”, 3.2”, 3.5”, 3.95”, 3.97”, 4.3”, 5”, 5.6”, 6.86”.

--Middle sizes which include: 7”, 8”, 9”, 10.1”, 10.2”, 13.3”,14.1",15.6",17",21.5",23

Q3. Can I have a sample order of before formal order?
A: Yes, sample order is always welcome for new projects or replacement of running projects. We have stock of many standard models of TFT LCD modules and Touch screens from 0.96inch to 13.3inch , which means delivery is able to be made the same day as order.

Q4. What is the lead time for Sample order and Mass Production order?
A:
--For LXDisplay standard products, the lead time for samples is usually 1-7 days, for mass production it could be as fast as 10 days.

--For Customized products,

We are able to get new FPC ready in 7days, new Backlight in 15days, and new Capacitive touch panel or Resistive touch panel in 18days.

Mass production of special products could be as fast as 3weeks.

--In summary, based on our years of big output, we have been keeping good relationship with LCD panel, IC and other material suppliers, we had a steady supply even when there was heavy shortage of materials.

Q5. Do you have MOQ requirement?
A: Yes, it depends on different sizes of products. Please refer to our sales, thanks.

Advantage

We are professional LCD module manufacture in China with precise and advanced equipments.

High quality Control with CE, ROHS and so on approved.

More than 10 years of industry experience and involved main markets all over the world

Dedicated and professional sales team will offer you 24 hours online and immediate service

OEM and ODM support,12 months warranty for all of our products

Our mission is to help our customers achieve success, then fulfill our both dreams

        Founded in 2011, Shenzhen Adia Technology Co., Ltd. is a high-tech private enterprise specializing in R & D, production and sales of liquid crystal display (LCD), liquid crystal display module (LCM), TFT color LCD, touch screen and industrial intelligent serial port screen. And can provide a complete set of display screen and display scheme (PCBA).

        With a variety of standard and differential LCD module (LCM), LCD and TFT color display products. Make LCD and LCM of different specifications and technical requirements according to customers' requirements. The products are widely used in the fields of instruments, smart phones, tablets, POS machines, medical devices, car machines, intelligent robots, smart home, intelligent wearable products, UAVs, VR / AR eyes and military products. The products strive to achieve high quality, micro power consumption, fast delivery, reasonable price and timely technical support. With a wide range of well-known enterprises at home and abroad, the products have been widely used and recognized in the market.

        The company attaches great importance to product quality and strictly implements IOS9001 and RoHS management. Stable quality, professional technical support and timely service are the commitment of Adia to customers. Today, the TFT market is more and more widely used, Adia strives to create a professional and well-known manufacturer of TFT display screen industry with consistent adherence, together with customers and suppliers.