LifePO4 6.4V 1800mAh built-in battery electronic led converter for LED panel or LED downlight

LifePO4 6.4V 1800mAh built-in battery electronic led converter for LED panel or LED downlight

1. Description

1) Constant Power Output: Experience consistent and reliable power supply for your LED lighting systems, ensuring uninterrupted illumination.
2) Input/Output Relay Switching: Seamlessly switch between normal and emergency modes during power outages for continuous lighting operation
3) Multiple Protection Functions: Benefit from battery overcharge and over-discharge protection, along with output short circuit protection for enhanced safety.
4) Built-in Battery, Easy Replacement: Enjoy the convenience of a built-in battery with easy replacement, ensuring hassle-free maintenance.

2. Parameters

Charge Part	KE006	KE006-02M180HB	KE006-03M180HB
		KE006-02A180HB	KE006-03A180HB
	Rated input voltage	220-240Vac 50Hz /60Hz
	Rated input current	0.05A Max. @230Vac
	Input inrush current	10A(Twidth=100uS 50% Ipeak )@230Vac(Cold start at full load )
	Power factor	≥0.5@230Vac
	Input power	<4W
	Battery charging current	200mA Max
	Battery charging time	24 hours Max
Emergency Part	Operating mode	Emergency mode
	Load type	LED
	Emergency power	2W	2.5W
	Emergency time	3 hours
	Load output current	100-30mA	150-45mA
	Load output voltage	20-60VDC
Battery	LifePO4 (The battery capacity meets the emergency time at 25℃)	6.4V 1800mAh
	Battery warranty	Warranty 3 years, Design Life 5 years.
Exception Driver Requirements	Surge current	8A
	Input current	3 A Max.
	Output current	3 A Max.
LED Indication (Manual test)	Charging	Greenlight
	Fault	Green light off
Emergency Function Test	Manual test	KE006-02M180HB / KE006-02M180HB
	Autotest	KE006-02A180HB / KE006-02A180HB
Auto Testing	Fault/test / Status	Reason	Charge Indicator Status
	Battery fully charged and operational	Standard daily use
			solid green
	Battery Charging	Initial Charge/Battery Top Up
			solid green
	Auto Test 3 Hours (every 12 months)	Periodic self-test
			Flashing Green 3 sec on 1 sec off
	Auto Test 5 Min (every 30 days)	Periodic self-test
			Flashing Green 3 sec on 3 sec off
	Duration test fault	Failed the 3-hour annual test
			Flashing Red 0.5 sec on 0.5 sec off
	LED fault	Not plugged in or damaged/faulty
			Flashing Red 2 sec on – 2 sec off
	Battery Disconnected/Faulty	Not plugged in or damaged/faulty
			solid red
Abnormal protection	over-charge/deep discharge protection	Yes
	Output over-voltage protection	Yes
	Output overload protection	Yes
	Output short circuit protection	Yes
Operating Environment	Operating temperature/humidity	0℃…+50℃; humidity:20%-75%(without condensation)
	Storage temperature/humidity	-5℃-35℃
	Case Max. Temp(Tc)	75℃
Safety & EMC	Withstand voltage	3000Vac 5mA 60S (Input “L N” – output “SEC+ SEC-)
	Safety standard	EN61347-1, EN61347-2-7
	EMC standard	EN55015, EN61000-3-2, EN61000-3-3
	Battery standard	UN38.3
	Environmental protection requirements	Compliant to RoHS
	Certification	CE
Others	In/output(terminal/wiring)specification	Press terminal, wire diameter:0.75-1.5mm2
	IP rating	IP20
	Type of protection	Class 2
	Installation type	Built-in installation
	Installation dimension	211*42.5*25mm
	Packaging requirement	White box+Instruction manual+clapboard+outer carton(K=A)
	Weight	200g;
	Lifespan	5 Year @Ta ( Battery not included )
Notes: All parameters are tested on the input voltage 230Vac, environment temperature 25℃ unless otherwise specified.

3. Dimension (Unit:mm)

4. Wiring Diagram

OR

5 . Manual Test & Operation Instructions

1). Connect the wire according to the wiring diagram.

2). L, N power on, Switch on S1. then the load lamp turns on, The emergency driver indicator light turns green, emergency power supply normally charging. Turn off Switch S1, and the load lamp turns off.

3). Emergency Simulation: Switch on, the load lamp turns on, press the switch(TEST SWITCH), then switch to emergency mode, the indicator light of the emergency driver will be extinguished. Release the switch(TEST SWITCH), then the lamp is powered by the LED driver, the indicator light will turn on.

7. Battery Application Notice

1)The battery should be recharged and discharged semiannually in normal use conditions.

2)Do not connect to the circuit when the battery is not used to prevent over-discharge of the battery due to self-consumption of the circuit board.

3)Please keep the battery from the heat source when installing and using it, and only be allowed to use it in a certain working temperature range.

4)The battery should be stored in a cool and dry environment.

5)After a long time of storage, the battery is cycled every 12 months as required.

Focus on intelligent lighting control and innovate constantly！

About Merrytek

Shenzhen Merrytek Technology Co. Ltd, founded in 2011 in Shenzhen China. For more than 13 years, we have been dedicated to research electronical products for professional lighting & smart control applications. Our main products include microwave and PIR fixture sensor, human breathing detection sensor, daylight sensor, DALI & 1-10V dimmable driver, emergency pack, & IOT controls.

Why Merrytek?

Merrytek has a leading R&D team with 75 engineers, and owns pre-research team 14 members. We got over 600 patents in China and oversea countries, including 80 invention patents.

Merrytek has invested the automation line for microwave sensors in 2018. All process from plug-in, assembling, testing and packaging are completed automatically, which raise the production efficiency as well as qualified rate.

All Merrytek products are 100% tested during production, and after product is packaged, sampling test must be carried by OQC, to make sure every product received by customer can work normally.

Contact us when you have any query of Merrytek product, we will respond you fast within 24 hours in working days. Merrytek sales team is in this industry over 10 years’ experience, service over 1000 customers all over the world, we can offer you fast and professional service.

Euro, Asia & Africa market：Ray  raylei@merrytek.com

America & Australia market：May  may@merrytek.com

Others:  sales@merrytek.com

Core Technologies Advantages

Microwave Motion Sensor

Based on principle of Doppler effect and 5.8GHz microwave detection technology for motion detecting. Currently, Merrytek developed over 200 models motion sensors which support long detection area up to 20m, 15m mounting height and outdoor use motion sensors. Those are at the leading position in our industry.

Typical products: MC and MLC series.

LifeBeing Presence Sensor Technology

As only support big range movement detecting, microwave is normally used in the places people only make a brief stay, for example, corridor, stair well, warehouse and parking lot. Merrytek use high frequency microwave and unique programming, microwave sensors are able to detect very minor movements, i.e. typing and breathing to avoid false reporting and underreporting. Merrytek provides series sensors with KNX, DALI, 485 and Bluetooth for building automation.

Application: office, classroom, meeting room, kitchen, rest room and so on.

Typical products: MSA series.

Daylight Sensor

As always, Merrytek concentrates on simple intelligent light solutions and luminaries’ construction. We successfully completed an in depth study of our patented self-adaptive LED drivers which can identify artificial light and natural light. We therefore can supply an extremely cost-effective and energy saving daylight harvesting solution for office use.

Typical products: MS series

Flicker-free DALI/1-10V Dimmable LED Driver

Replacing traditional incandescent and fluorescent lights with more efficient and longer-lasting LED-based solid-state lighting (SSL) is an undeniable trend in the lighting industry. However, since SSL fixtures are directly connected to an AC power supply, (consistent with legacy lighting), there is a risk that 100-Hz or 120-Hz flicker could occur as a result of the driving AC current’s fluctuation at the supply's output. Flicker can make people uncomfortable, causing headaches, stress and fatigue even though the human eye may not detect the flicker.

Currently, most of dimmable LED drivers have flickering issues (especially PWM types), when dimmed below 5%. Merrytek newly-developed flicker-free dimming technology can eliminate nearly all flickering and even when dimmed to 2%.

Typical products: ML and KL series.

Emergency Pack for LED Lighting

From 2016, Merrytek has dedicated to quality emergency pack for LED fittings, such as ceiling lights, tri-proof lights, down lights and panel lights. Top quality battery will be use in all our range and make sure excellent life time and good reputation.

Typical products: KE and ME series.