5.6Kw Rotary Automatic Capsule Filling Machine Quantitative Dose Filling

Technical parameters:

The machine may make technical improvements without prior notice, and the attached picture shows the options that may be offered.

The process of capsule filling:

The smooth drive system:

---

1.The DF110 and DF80 type grading box combination are used to make reasonable adaptation. Greatly improves the stability and service life of the machine.

2.Improve the transmission cam of all stations, use high quality special steel to make the inner groove wheel drive, eliminate the disadvantages of spring pulling easy fatigue and fracture, and wear resistance, stable operation.

3.The new layout design of the mechanical transmission part and with the "inner cam" instead of the traditional "lever" filling transmission mechanism, so that the machine runs more quiet and stable.

Indexing box	Transmission part	Inside groove cam

Closed station turntable:

---

1.Use the imported silicone sealing ring to reduce the condition that the powder is brought into the turntable due to the expansion of the movement axis, and smooth operation, high accuracy;
2.It solves the complicated problem of installing and dismantling the mold, reduces the labor intensity of the staff, and strengthens the service life of the station rotary table.

Three-dimensional adjustment mechanism:

---

1.Eliminate the metering plate, copper ring natural deformation degree, uniform clearance, reduce the phenomenon of powder leakage;

2.Easy to disassemble and disassemble, easy to clean;

3.Ensure device differences.

Locking unit:

---

1.The front slope can make the capsule ready to lock settle down in advance to avoid the phenomenon of the old locking device cutting cap and flying cap.

2.Added the locking cleaning device, locking while locking the sac cleaning block to work, remove the fine dust raised between the upper and lower molds.

Easy to remove the hopper:

	The old hopper, loosen the hand wheel on the supporting column when disassembly and cleaning, and stretch on the long pressure spring in the column. Most of the hopper must be extended out of the upper Plexiglass to be removed. During the installation, the pressure spring needs to be squeezed to the bottom before tightening the hand wheel, and the employees need to spend a lot of effort to operate.
	A screw was added to the supporting post, the screw passed through the panel, the top connecting the hopper support, and the motor and turbine box were installed at the bottom. During hopper disassembly and installation, the whole lifting process can be operated on the PLC operation panel. Due to the use of a single screw support, the work when there is a slight shaking phenomenon.
	The split structure is directly fixed on the lower plane of the roof, with simple structure, stable and reliable when working, and convenient hopper disassembly. Release the fast interface of the material cylinder, then loosen the four screws on the hopper, then rotate out the small pin on the paddle, you can horizontally pan out of the filling part.

Copper collar:

1.Hard column: stable particle weight, loading amount close to the maximum value, one or two groups of filling rods have obvious beating, the adjustment range is too small, the machine load is large, the corresponding parts wear fast. 2.Soft column: stable grain weight, large adjustment range, small load, small wear of parts. Half column: sometimes appear puff powder particle weight and light. 3.Scattered sand: leakage, dirty machine table, installation difference. The gap type copper ring can be replaced with the sealing type.

According to the material situation, the company provides the optional replacement copper ring

Vacuum separation mechanism:

Modular powder filling mechanism:

Other performance:

Zhejiang Canaan Kesinlong Technology Co., Ltd. is a listed company - Zhejiang Canaan Technology Co., LTD. (Stock code: 300412) A joint venture with Ruian Kaixinlong Pharmaceutical Machinery Technology Co., LTD., which specializes in manufacturing and selling automatic capsule filling machine and high-speed rotary tablet press, has won the title of national high-tech enterprise, and is one of the enterprises with strong scale and comprehensive strength of filling machine and tablet press production enterprises in China.

Canaan Kaixinlong is dedicated to the research, development, design and production of pharmaceutical filling, tablet pressing and related equipment. On the basis of the technology cultivated after more than 20 years of efforts and cultivation, we design the products with all our heart to meet the GMP pharmaceutical industry, and our excellent product quality and excellent after-sales service have won the high trust and favor of the users both at home and abroad. So far, our products have been sold to more than 30 provinces and cities in China, Hong Kong and Macau, and have been exported to more than 60 countries such as the United States, Mexico, Norway, Canada, Brazil, Russia, Greece, Syria, the Philippines, Vietnam, Bangladesh, and so on.

The company's series of products to introduce new international design concepts and advanced technology, a complete range of specifications, technical level, smooth operation, filling dose accuracy, easy to clean, perfect performance, quality at the domestic high level.

Over the years, the enterprise in line with the "quality-oriented, customer first, scientific and technological innovation, excellence" quality policy, the product series, won a number of Zhejiang Province, science and technology achievements appraisal and the title of the provincial excellent scientific and technological products. For two consecutive years, the company has become one of the hundred advantageous growth enterprises in Ruian City, science and technology enterprises in Zhejiang Province, specializing in new enterprises in Zhejiang Province, and has the right to import and export, and its products have passed the CE mark certification of the European Union, and has been awarded a number of national patents.

Canaan Kaixinlong sincerely hopes to establish close business cooperation relationship with domestic and foreign enterprises, and provide excellent service to customers with its management concept, strong technical force and rich professional experience.