The Vamo is a sleek, reliable device with a quality finish
supporting 18350 and 18650 batteries.
The Vamo V2 is for the more experienced vaper! The Vamo V2 gives
you complete control over the vapor output voltage. LED battery
power display. Overtime vaping warning. Built-in three digital
displays (ohms meter, volts/watts, atomizer voltage output).
- 1* Battery body
- 2* 18350 Battery
- 2* CE4
- 1* wall Charger
- 1* Manual
- 1* Gift Box
1.Output Voltage/Wattage is from 3.0V to 6.0V, or 3 -15W by
adjusting the working volt (+- 0.1V) and watt by pressing + and -
2.Keep pressing the + button more than 3 sec, LCD screen displays
the present working resistance.
3.Keep pressing the - button more than 3 sec, the LCD screen will
show the battery voltage.
4.5X click, LCD screen displays " on " or " off ".
5.Output power is 3W~15W.
6.Max Armature Current 5A.
7.The on/off Mode will shut the unit off completely.
8.Reverse battery protection keeps circuit safe if the battery is
9.Battery Monitoring shuts the unit off once battery has reached
end of charge.
10.Amperage limiting system protects against over current
11.Thermal Monitoring shuts the device off if it detects a high
12.It works well if the resistance of atomizer is between
13.Time limit protection function, it will automatically shut down
after 10 seconds' working.
14.LCD displays " LO-Ω" if resistance is lower than 1.2ohm, "LO-V"
if short circuit.
IMPORTANT NOTE: DO NOT OVER-TIGHTEN THE ATOMIZER/CARTOMIZER ON THE
DEVICE, IT WILL CAUSE IT TO BREAK AND VOID THE WARRANTY. WE WILL
NOT ACCEPT RETURNS ON VAMO'S WITH BROKEN CENTER PINS.