Sign In | Join Free | My spintoband.com
spintoband.com
Products
Search by Category
Wholesale Marketplace
Home > Other General Mechanical Components >

JUYI JYQD-6.5E Three-phases BLDC Motor Driver O.V / L.V Protection PWM Frequency 1-20KHZ

Categories BLDC Motor Driver
Brand Name: JUYI
Model Number: JYQD-V6.5E
MOQ: 1 set
Delivery Time: 5-10 days
Place of Origin: China
Price: Negotiable
Packaging Details: PE bag+ carton
Payment Terms: T/T,L/C,Paypal
Supply Ability: 1000sets/day
Working Voltage: 36-72V DC
Working current: 15A
Speed control: PWM or 0-5V
O.V / L.V protection:: Yes
Speed pulse signal output: Yes
Shape: Rectangle
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    • Product Details
    • Company Profile

    JUYI JYQD-6.5E Three-phases BLDC Motor Driver O.V / L.V Protection PWM Frequency 1-20KHZ

    JYQD-V6.5E 36-72VDC 15A current BLDC motor driver for sensorless BLDC motor​
    Model number :JYQD-V6.5E
    Operating temp. :-20—85℃
    Operating voltage :36V-72V DC
    Cont.working current :15A
    • PWM speed control :PWM frequency:1-20KHZ; Duty cycle 0-100%
    Analog voltage speed regulation :0-5V
    O.V / L.V protection: YES
    Speed pulse signal output :YES
    Application notes:

    1. Please confirm that the voltage and power parameters of the motor not exceed the range of the driver board as specified.


    2. This BLDC motor driver board is used for 3-phase brushless sensorless motor, but not suit for all 3-phase brushless sensorless motors directly. If the driving effect is not good (such as starting jitter, reversing, the motor noload working current is too large, the speed is not stable, the efficiency is low, and can’t start-up with load.) Customers can adjust the resistance and capacitance of the driver board according to the actual situation to achieve the best driving effect (see the attachment for how to do the adjustment)

    3. JYQD-V6.5E driver board is bare board without housing and heatsink. If the power of the motor below 100W ,its no need to add heatsink, It only needed to ensure normal ventilation and well insulation. If the power of the motor more than 100W, it must add heatsink like the diagram as below.


    4. Please take note that JYQD-V6.5E driver board has no anti-reverse connection protection, it will permanently damage the driver board if reversed polarity connection.

    5. The 5V output port on the driver board prohibits connect external device. It is only applicable to the external potentiometer and switch of the board for speed regulation and reversal.


    6. The “Signal” terminal on the JYQD-V6.5E driver board is the motor speed pulse output signal (push-pull output), and the maximum output current is less than 5mA.


    Driver board diagram Driver board diagram with heatsink
    Wiring diagram
    5V -----Driver board internal output voltage
    Signal ---- Motor speed pulse signal output port, 5V pulse signal.
    1. Control port
    Z/F---- Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0 V low level or connect to GND is reverse direction.
    VR ----Speed control port. Analog voltage linear speed regulation 0.1v -5V, The input resistance is 20K Ohm ,connect with GND when input PWM speed regulation, PWM frequency:1-20KHZ; Duty cycle 0-100%
    GND---Used for Drive board internal control
    Torque---For starting torque adjustment use, make sure remove the resistors for fixed-torque on the board before use this function (contact us if you want use this function before using)
    2. Power port
    MAmotor phase A
    MBmotor phase B
    MCmotor phase C
    GNDDC-
    VCCDC +

    3. Use shielded wires if the drivers board has more than 50 cm distance from the motor, otherwise it may lead to abnormal driving, affecting the normal use.
    4.Control port distance: 2.54mm,Power port distance:3.96 mm
    5. Pay attention to the insulation between the driver MOSFET and the heatsink or the installation plate.
    Dimensional drawing

    DOWNLOAD JYQD-V6.5E USER MANUAL

    Quality JUYI JYQD-6.5E Three-phases BLDC Motor Driver O.V / L.V Protection PWM Frequency 1-20KHZ for sale
    Send your message to this supplier
     
    *From:
    *To: Shanghai Juyi Electronic Technology Development Co., Ltd
    *Subject:
    *Message:
    Characters Remaining: (0/3000)
     
    Inquiry Cart 0

    Friendly Links: www.everychina.com

    Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们

    Copyright © 2009 - 2024 spintoband.com. All rights reserved.