Fabric Inspection Machine With Fabric Rolling Machine And Fabric
1. This machine is designed for inspection high quality open-width
2. Open-width entering device with fabric tighten frame.
3. Rolled fabric entering device
4. Tension pole adjust the speed in forward and backward, cause the
fabric inspection without tension.
5. Inspection platform with lighting box installed, the diagonal
design makes the inspection work easier and simpler, and increase
the works speed.
6. Electric length calculator calculates the length of fabric
7. Electric eye tracing edge device, cause the fabric upload
8. Work platform installed between fabric inspection and uploading
9. Machine top lighting device.
10. Double roller uploading device.
11. Fabric and automatic stop device.
12. Blowing device.
13. Shape fabric rolling stretching roller, stretch out the fabric.
14. Roll to roll, plait to roll, roll to plait, plait to plait
function can meet all kinds of requirements.
1. Automatic cutting device.
2. Automatic weighing up device.
3. Defect fabric edge labeling device.
4. Fabric inspection recording software.
5. Spray device.
6. Vertical fabric shaking device.
1. One set motor driven twin roller un-winding device inspecting
fabric in roll form equipped with two holding plate.
2. One set plaiting entry device with tension bar for inspecting
fabric in fold form or from fabric trolley .
3. aMachine is driven by four ac gear-motors with inverters for
infinitely variable speed control.
4. With three potential meters controlled dancing rollers, for
delivery and winding up to guarantee true tensionless operation.
5. Two scroll rollers for delicate curled edges.
6. One set ergonomically designed inspection table for high speed
operation with easy vision of fabric faults, with internal
7. One set overhead illumination.
8. One set remote on/off control by foot pedal.
9. True length measurement of running fabric at tensionless relaxed
state with two stage electronic preset length counter.
10. Photo-cell fabric end detector to stop machine automatically at
end of fabric.
11. One set operator platform place between inspection and winding
12. Adjustable roll hardness on winging device make sure fabric
13. One set electronic scanning device at winding unit assures
accurate edge-alignment control before winding.
14. One set air nozzles to provide uncurling effect on fabric edge.
15. One fabric winding device to provide fabric finished in roll
16. One set plaiting device on exit.
17.Voltage:380v/50Hz three phase (can be customized)
|1, Standard work area||2300mm,2500mm,2800mm|
|2, Speed||0~60 m/min|
|3, Size||3600(L)*3000(W)*2000 (H)mm|
|4, Total power||3.5KW|
|1, Automatic cutting device|
|2, Automatic weight up device|
|3, Defect fabric edge labeling device|
|4, Fabric inspection recording software|
|5, Spray device|
6, Vertical fabric shaking device