Categories | GPO3 Fiberglass Sheet |
---|---|
Brand Name: | Hongcheng |
Model Number: | GPO-3 |
Certification: | UL(E344098)/RoHS 2.0 /Reach/SGS |
Place of Origin: | China |
Payment Terms: | T/T |
IEC Standard: | UPGM203 |
German Standard: | HM2471 |
Flame Resistance: | V-0 |
PTI Proof Tracking Index PTI: | ≥600 V |
Toxicant(Emission halogen etc.): | Low |
The anti microbial properties of bacteria: | good |
UL Certification GPO-3 fiberglass Sheet / UL Certification upgm203
Product Introduction:
UL Certification GPO-3 fiberglass Sheet or related products are
consists of non-alkali glass mat impregnated and boned with an
unsaturated polyester resin ,and laminated under high temperature
and press
Feature:
It has good machinability,high mechanical strength,good dielectric
properties,excellent proof tracking resistance and arc resistance.
Application:
it is applicable for making insulation structure components or
parts in F-class electric motors,transformer,switchgear,circuit
breakers and electrical equipments. UPGM can be moulded into all
kinds of structure parts or profiles as per customer's special
requirement.
Thickness range :2mm-60mm
Sheet Size:1000mm*1200mm
Main Color:Red,White ,Brown,Yellow or Gray
Hong Cheng Grade | HC-GPO3 | |||
IEC 893 / EN 60893 Grade | UP GM 203 | |||
DIN 7735 Grade | HM 2471 | |||
ANSI (NEMA) Grade NEMA LI-1 | GPO-3 | |||
Items | Test Method | Unit | Typical Values | |
Physical Properties | Color | Visual inspection | ---- | Red/White/Brown/Grey |
Specific Gravity | IEC 60893-2:2003 | g/cm3 | 1.95-2.05 | |
Water absorption | ISO62:2008 | % | ≤0.5 | |
Mechanical properties | Tensile Strength | IEC 60893-2:2003 | Mpa | ≥130 |
Compressive strength | IEC 60893-2:2003 | ≥300 | ||
Flexural Strength | IEC 60893-2:2003 | ≥180 | ||
Impact strength | IEC 60893-2:2003 | KJ/m2 | ≥60 | |
Electrical properties | Volume Resistivity | IEC 60093:1980 | Ω·m | ≥ 1.0 x 1010 |
Surface Resistivity | IEC 60093:1980 | Ω | ≥ 1.0 x 1012 | |
Electric Strength ┴ | IEC 60893-2:2003 | kV/mm | ≥ 12 | |
Breakdown Voltage // | IEC 60893-2:2003 | kV/25mm | ≥ 80 | |
Arc Resistance | IEC 61621:1997 | sec | ≥180 | |
PTI Proof Tracking Index PTI | IEC 60893-2:2003 | --- | ≥600 | |
Dielectric Constant | IEC 60893-2:2003 | --- | 4.0-5.0 | |
tgδ Dissipation Factor | IEC 60893-2:2003 | --- | ≤0.03 | |
Thermal properties | Coefficient of Thermal Expansion | ASTME 228-11 | 1/K | ≤2x10-5 |
Temperature Index | IEC 60085:2004 | ℃ | 155 | |
Flame Resistance performance | Oxygen Index | ISO 4589-2:1996 | %O2 | ≥ 30 |
Flame Resistance | IEC 60893-2:2003 | --- | V-0 | |
Toxicant(Emission halogen etc.) | E662 | --- | Low | |
Other properties | The anti microbial properties of bacteria | G21-G22 | --- | good |
UL Certification GPO-3 fiberglass Sheet used in UPS
products: | UPS |
materials: | UL Certification GPO-3 fiberglass Sheet |
Description: | UPS is the uninterrupted power supply which is connected to the
host by the battery ,converts the direct current into the system
equipment of the AC by module circuit of the main engine inverter.
When the market input is normal,UPS supplies the AC to the load
after voltage stabilization .At this time, UPS is an AC voltage
regulator, and it also charges the battery inside the machine; When mains supply interruption (power outage), UPS use the battery's direct current energy to continue supply 220V alternating current to the load immediately through the inverter switching conversion method ,it makes the load keep working and protect the software and hardware from being damaged. UPS devices usually provide protection against voltage too high or too low .The flame retardant requirement for insulating materials is V0, high strength and temperature resistance , The commonly materials used in UPS is HC-GPO3 UPS are divided into:prepared UPS ,Online UPS,On line interactive UPS,The working principle of UPS is use the AC to charge the battery.than use the battery to supply the power for inverter cabinet,in order to supply power automaticly when the AC fails. GPO-3 sheet,PC are mainly used as Protective cover sheet , the structures plate,battery box which will improve the safety and durability of UPS. Main famous cooperative enterprises:Kehua Group(China) Co.,Ltd,East Group Co.,Ltd,Emerson electric(China) Co.,Ltd,Schneider(APC) |
Our company is located in Xiang’an manufacture base of Xiamen
Special Economic Zone.It is a national hi-tech enterprise with the
ability to R&D,production,sale and further processing,we has
became the solver of electric insulation technology project .We
have more than one hundred machines including CNC and Digital
controlled lathe.every kinds of Bending machine,Punching
machine,have establish the completely production chain of design
and precision further processing .We are the only modernization
company in the country which is totally operated by Numerical
control in respect of material production and the process for
non-metallic insulating spare parts.All of the products have gained
the UL certification of the USA,The French national standard
certification,CEMT,RoHS,Reach and many national& international
authoritative organization certification.
About Us
Customer Services
Sell On Us
Friendly Links: www.everychina.com
Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们