Special Customized 10 Bands Inner Antennas Wireless RF Signal
1. This cell phone jammer can be used to jam all cell phone signals
such as GSM,CDMA,DCS,3G,4G, 2.4G, WLAN, WIFI, Bluetooth, and other
wireless signals without interference to other electronic devices
outside jamming range.
2. Configured a new type of ultra-large aluminum alloy heat sink
and fan to form a highly efficient intelligent cooling system to
ensure that the devicecontinue to work for long time without hot.
Stable performance, safety, and reliability. Appearance patent
certificate has been obtained.
3. Obtained a certificate of inspection of the Institute of
Environment and Health-related Product Safety of the Chinese Center
for Disease Control and Prevention. Green environmental protection,
electromagnetic field strength is much lower than the national
standard, without any impact on the human body.
4. Obtained the test report of the Security and Electronic Product
Quality Testing Center of the Ministry of Public Security, and
selected foreign high-performance integrated circuits and patch
components for high integration and reliable quality.
5. The antenna uses a built-in omnidirectional whip antenna, no
external antenna, easy installation and management.
6. The product uses high-quality silent fan, noise is small while
7. Effective jamming scope 100-300 square meters (the distance
between cell phone and signal base station> 200 meters).
Multifunction 10 Inner Antennas Wireless Cell Phone Signal Jammer is a high-tech product that has been developed by our company using
the most advanced technology. It is aimed at the continuous
development of communication standard. 2.4G 5.8G WiFi Signal Jammer for Wireless Devices Security
Protection has been successfully developed according to the actual situation
of mobile communication at home and abroad.
The signal jammer can cut off
phone signals/WIFI signals/interphones, bone conduction headphones,
erasers, rulers, watches, glasses cameras and other digital
transmission tools within a radius of 2-50 meters.
All kinds of wireless spy bug can also be disabled. And the WiFi signal jammer will not interfere with the work of other
electronic devices, thus ensuring the safety of the required
places, leaving the partition range, you can resume normal use, and
without any damage to the human body. Our cell phone blocker meet
the GB9175-88 "environmental electromagnetic wave health standards
"Level 1 standard".
Power Adjustable, More convenient and safe.
1. The National Education Department designates special models for
college entrance examinations for all frequencies
2. The Inner Directional Antennas 10 Bands Cell Phone Signal Jammer can effectively interfere with a variety of tools (including 4G and
many other customized signals)
3. The most extensive frequency range coule be 100MHZ-2700MHZ full
4. The highest effective power of the machine: single-channel
output power of low frequency 100-800MHZ can be as high as 10W,
high-frequency 800-2700MHZ single output power of 5-8W.
Innovative technology of manufacturers, full-band wireless signal
shielding equipment, wireless headset, Bluetooth, interphone signal
The full-band wireless signal shielding apparatus is a high-tech,
new-type information security and security product that has been
successfully developed by our company in response to the detailed
requirements of various wireless signal plagiarism tools in the
current examination room in response to the requirements of the
National Education Ministry's standardized examination room
construction. The device effectively blocks all cell phone signals
(CDMA, GSM, DCS, PHS, TDSCDMA, CDMA2000, WCDMA), walkie-talkies,
wireless, bone conduction headsets, 2.4G (WLAN, WIFI, Bluetooth),
cameras, and built-in LED display digits in the examination room
Transmission and reception tools (rubber files, watches, rulers,
pens, glasses probes) and other wireless copy tool signals.
Selected in the list of relevant equipment for the standardized
examination room of the Ministry of Education Examination Center.
Installation and usage instructions
1 installation steps and methods
1.1 Remove the shielded instrument host from the box.
1.2 Hang the shielding instrument on the wall or place it in the
appropriate position. The optimal installation height is 1-1.8
1.3 Insert the AC input of the power supply into the mains socket,
and then turn on the power switch. The work indicator light on the
power supply is on.
1.4 For large and small space installation location point method,
as shown below
Example 1: Indoor Space (less than 200 square meters)
Example 2: Indoor space (greater than 200 square meters, multiple
units must be used)
Example 3: Outdoor large space (greater than 1000 square meters,
with multiple cellular effects best)
2.1 The Multifunction 10 Inner Antennas Wireless Cell Phone Signal Jammer is a built-in antenna and the antenna does not need to be
installed. Power on the host and turn on the switch.
2.2 The effective coverage area of the shielded instrument is a
circular area centered on the shielded instrument. Therefore, when
using it, make sure that the shielded instrument is properly
positioned so as not to produce a blind corner.
2.3 The Inner Directional Antennas 10 Bands Cell Phone Signal Jammer should be placed in a well ventilated place, try to avoid the
obstruction of large objects, avoid strong heat source and strong
electromagnetic source. To ensure the shielding effect and
long-term stable work.
2.4 When shielding the instrument, do not stack other items on it
and disassemble the antenna so as not to affect the shielding
effect and damage the machine.
2.5 When the Blocker is not used, the power should be cut off in
time to avoid affecting the normal operation of the mobile phone.
2.6 When using Multifunction 10 Inner Antennas Wireless Cell Phone Signal Jammer outdoors, pay attention to waterproof.
2.7 When the area of the used site is larger than the effective
blocking range, it is recommended to use more Wireless RF Signal Blocker sfor honeycomb installation to ensure the shielding effect.
2.8 Keep away from corrosive gases and liquids, and do dust and
moisture protection so as not to accelerate the aging of the
internal components of the equipment.
2.9 When placing outdoors or in the wild, care should be taken to
install additional protective devices in the presence of
destructive animals such as rats and ants.
2.10. The equipment must remain upright.
2.11 The power cord must be fully open so that the power supply is
as far away from the equipment as possible.
2.12 Keep dry, do not invade any liquid, do not get near fire.
3.1 This Multifunction 10 Inner Antennas Wireless Cell Phone Signal Jammer is a maintenance-free device and does not require maintenance.
3.2 When wiping the surface of this Special Customized 10 Bands Inner Antennas Wireless RF Signal
Blocker, do not use chemical solvents and avoid water in the machine.
3.3 The Wireless RF Signal Blocker should be stored in a dry and ventilated place to avoid prolonged
exposure to salt spray and harmful gases When not in use.