1.Description of liquid silicone rubber
C830 Silicone rubber is condensation cure silicone rubber for mold
making. The silicone rubber will be cured under room temperature,
It’s two-components, the mixing ratio is 100:2 . Part A is a
flowable liquid silicone , part B is the catalyst. It has an
exceptional fluidity and good operability. C-830 tin cure mold
silicone has a good property , it is suitable for various mold
2.Characteristics of liquid silicone rubber
*An exceptional fluidity and good operability, easy to demold
*Good tensile strength and tear strength
*long shelf-time &lifetime
3.Application of liquid silicone rubber
stone mold ,concrete mold , cement casting mold
polyurethane casting mold , GRC casting mold , fiberglass cating
statue mold , sculpture mold , resin craft mold ,artificial wooden
gypsum mold , plaster mold ,bronze casting mold
candle mold ,soap mold, shoe mold , tyre mold ,etc.
C830 Silicone rubber is mainly suitable middle sized product and
big size with simple pattern.
4.Using instructions of liquid silicone rubber
Step 1: prepare and clean the prototype.
You must make sure your original molds perfect. fix the original
mold on a board , then using some assistant material(like
cardpaper) to make a frame for to surround the prototype. The frame
is no need ,if we make the mold by brushing way .
Step 2: Take the silicone and catalyst as the ratio 100:2
(silicone:catalyst=100:2) ,mix the silicone rubber and catalyst
*Notes: Molding silicon rubber is a kind of flowing liquid and it
contains two parts. Part A is a kind of flowing liquid and part B
is the curing agent. Remember to mix part A and part B evenly,
otherwise the silicon rubber will be partly solidified and this
will bring troubles for your final operation. What’s more, the
finished molds will have a short life. All of these will cause a
waste of silicon rubber.
Step 3: Vacuum pumping
After mixed the silicone evenly, it is better to release the bubble
by Vacuum pumping.
Step 4: Pouring cast or brushing cast
After released the bubble, we can pour/brush the silicone rubber on
*Notes:Please finished all the steped within the operation time .If
not it will cause cross linking reaction, and no more further steps
will be available.So,we have to pay attention to the pot life and
Shelf life and transportation
1. Twelve(12) months when stored at 25C in tightly closed original
2. This kind of product is non-dangerous product, which could be
transported as general chemicals.