Concrete Penetrating Sealer, Competitive Price
Professional Manufacturer, Core Technology!
First Class Quality, but Competitive Price!
Provide OEM service!
Goodcrete Deep Penetrating Sealer(DPS) is a water-based, inorganic,
permanent waterproofing and protective agent forconcrete construction. It is environment friendly, colorless,
odorless, non-toxic, non-flammable, free of VOC, easy and safe to
use.Beside durablewaterproof and anti-seepage functions, it also can give the
concrete construction comprehensive improvement andprotection, such as self-sealing, hardening, cracking resisting,
anti-corrosion, anti-efflorescence, anti-chloride, etc.
The inner alkali content of the concrete is about 360 times more
thanthe surface’s, through the pores, DPS penetrates into the concrete
structures, chemically reacts with the free alkalispresented in the concrete and forms silicate gel, which seals the
micro cracks and capillary pores becomes the integral partof the concrete, strengthens the concrete structure, and blocks the
harmful substances ingress; when water losses, it partlysolidifies into crystalline powder, let the concrete breathe
freely, when meets with moisture or water, this reaction repeatsagain, thus, gives the concrete permanent waterproofing and
protection, such as sealing, waterproofing, anti-permeating,hardening, dust-proofing, anti-corrosion etc.
(Crystals that generated from the crystallization test of DPS and
Characteristics and Functions:
01. Permanent waterproofing, moisture-proofing and anti-seepage;
02. Reinforces the density and hardness of concrete;
03. Reduces dusting, efflorescence, cracking and damage of
04. Self-seals hairline cracks <<0.3mm repeatedly;
05. Resists the corrosion of chloride, UV, chemicals and salts;
06. Discourages the growth of bacteria, mold and microorganism;
07. Prolongs the service life of paint and concrete buildings.
08. Not changes the color and structure of the substrate.
10. Non-toxic, absolutely environment friendly.
11. Easy and fast to use, spray, brush or roll evenly on the
12. Rigid waterproofing, doesn’t need screed-coat and protective
13. Inorganic products, permanent functions.
(Full set of test report)
|Basement, subway, sewage treatment plant, dam,reservoir,variouspools, dock, green roof, grain depot, warehouse, civil air defenseconstruction, floor’s waterproof layer, etc.|
|Clean workshop, winery, food factory, grain depot, ancientarchitectures, etc.|
|Anti-acid/alkali/salt||Chemical plant, waste yard, power plant etc.|
Reduce freeze/thaw damage
Prolong service life
|Bridge and culvert, airport runway, parking lot, tunnel, etc.|
Prevent finish coating peel off
Concrete cracks/damage repair;
As primer coating of finish coating, etc.
How to use:
01. Equipment: Broom, respirator, low pressure sprayer (or brush,
roller), gloves, work
clothes and boots, etc.
02. Visible cracks≥0.3mm, should be repaired first.
03. Thoroughly clean up the surface, thoroughly remove
contamination, laitance, oil, film
and coating toensure the DPS can efficiently penetrate into the surface..
04. The surface should be dry or semi-wet.
05. Shake well before using.
06. Spray the DPS evenly and saturatedly on the clean concrete
surface, the areas become
dry too quickly,immediately spray again.
07. Coverage: 3-5 m2/kg(2 times spraying), the higher the substrate
density, the less
08. Air temperature 5-35℃, surface temperature 2-33℃,relativehumidity10-90% is the best.
09. When the whole surface become semi-wet after the 1sttime spraying, spray DPS for the
10. Avoid the surface suffering from water and rain within 24h
after construction, and after
3-7days, thetreated surface can be started following works.
Packing:20KG/ Pail, 220KG/Pail i.e. 5 US Gal/Pail, 55 US Gal/Pail(HDPE Pail)
(Exported from 2010, old label from 2009-2014.07)
Available Product Documents:
01. Product Data Sheet.
03. Test Reports
04. Construction Guideline
05. Company Brochure
07. Free sample