Categories | Battery Pack Assembly Line |
---|---|
Brand Name: | ZeCheng |
Model Number: | ZC-AA-47 |
Place of Origin: | China |
MOQ: | 1 |
Price: | Negotiation, email communication |
Payment Terms: | L/C, T/T |
Supply Ability: | 10 sets per months |
Delivery Time: | 90 Working day |
Packaging Details: | Wooden box |
stable: | 97% |
speed: | ≥12PPM/min |
qualified: | 99.50% |
weight: | 800KG |
Warranty: | 1 Year |
voltage: | AC220±10% |
Cadmium Nickel Battery Pack Assembly Line Zinc Nickel Battery Plate Blanking Machine
2.1.1.Brief description of pole sheet punching machine
The equipment is suitable for the blanking process of pull-type
electrode belt of various alkaline batteries such as cadmium-nickel
battery, zinc-nickel battery, nickel-hydrogen battery, iron-nickel
battery, etc.There are two working modes: automatic and
manual.Automatic working mode of the basic workflow, rolling
machine, rolls installed in polar zone through the conveying
mechanism, conveying mechanism according to the length of the pole
piece dimension clearance feeding, bring into the pack on the punch
mould, the mould of the upper die is installed in the press slide
block, block up and down motion on the drive mode will be located
in the mould of extremely belt cutting into slices.Through the
blanking hole in the center of the die and punch table, the pole
pieces are dropped into the belt conveyor under the punch. The belt
conveyor transmits the pole pieces to the sorting station.The
finished pole strip is formed into incomplete porous strip waste,
which is wound on the reaping machine and collected into coil.
2.1.2. Design requirements
2.1.2.1.The maximum width of pole band is 220mm.2.1.
2.2.The maximum shear speed is no less than 80 times /min (when the
length of the pole sheet is 75mm), and the shear speed is
adjustable.
2.1.2.3. The maximum shear length is 300mm.
2.1.2.4. The device has at least two working modes: point movement
and automatic operation.Set up two - handed safety console.
2.1.2.5. The safety door protection device is provided on the front
and back of the equipment workbench. Only when the safety doors on
both sides are closed can the equipment operate in the automatic
working mode.
2.1.2.6. The operation control panel of the equipment has such
functions as power switch, monitoring data of the running status of
the equipment and LCD display of fault indication.
2.1.2.7 the sliding and rotating parts of the equipment, such as
guide rail and spindle, are equipped with perfect lubrication
devices.The equipment has the function of stroke, batch,
maintenance count and so on.The equipment is equipped with the
interface of distribution with the receiving, discharging machine,
feeder and belt conveyor.
2.1.2.8 the rewinder is electrically driven to collect clearance,
which is suitable for frequent starting.Voltage 220V (380V),50Hz.
2.1.2.9. After punching and shearing, when the pole strip wastes
are stretched to the upper limit, the uncoiler stops collecting
materials.When the waste strip falls to the lower limit, the winder
unloads the material.The feeder must have a counterweight to ensure
sufficient tension on the scrap strip to ensure the speed of the
feeder.The diameter of the waste tape reel mounting shaft of the
rewinding machine is 38mm.The rewinder shaft is provided with a
waste reel orientation device.The position of the pole band
position detection sensor is adjustable.The installation axial
position of the speed reducer of the feeding device is parallel to
the vertical axis of the feeding device.The receiving device has an
independent electrical operation mechanism.
2.1.2.10. Coordinate the work movement of each part of the
production line of pole shears, and each part has the function of
independent operation and debugging.
2.1.2.11. The design, manufacture, installation and debugging of
pole shears are in line with the relevant national and industrial
specifications.
2.1.2.12. The manual working mode of pole plate puncher is used for
equipment maintenance and debugging, new mold debugging and initial
work.During the initial work, the manual drawing pole belt enters
the feeding mechanism, and the manual guiding pole belt enters the
punch mold. After several times of point operation, the waste
material is wrapped around the feeding machine shaft and can be
transferred to the automatic working mode when the normal feeding
tension is generated by the rewinding machine.
2.1.4. Technical parameters of the equipment
| ZBCA01A-00 |
Efficiency | The maximum shear speed is no less than 80 times /min (when the length of the pole sheet is 75mm), and the shear speed is adjustable. |
The total power(kw) | 13 |
Normal operating power(kw) | 12.5 |
The weight | 1000KG |
Cooperation commitment
1. New equipment promise
Our company guarantees that the goods provided to customers are
brand new, complete and unused equipment.
2. Confidentiality commitment
Our company promises that without the written permission of any
party, the other party's related drawings, technical information,
business information and other business secrets and technical
secrets must not be leaked to third parties in any way.
3. After-sales service commitment
(1) Two months from the date of shipment of the equipment, Party B
is responsible for non-human faults in a timely and free warranty
within one year (when the equipment is faulty, the after-sales
service staff will respond within 2 hours after receiving the
notification. According to the situation, personnel must be in
place within 48 hours. No later than 60 hours, to ensure the
continuity of production by the buyer;
(2) After the equipment has passed the warranty period, if there is
a problem, the two parties communicate and deal with it. If
necessary, after-sales personnel will be sent to repair it, and
only the cost will be charged. Zh
(3) During the warranty period stipulated in the contract and
technical agreement signed by the two parties, the company will
provide a warranty for quality problems that are not caused by
human damage during the normal use of our products.
About Us
Customer Services
Sell On Us
Friendly Links: www.everychina.com
Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们