Solvey Galden Specialty Polymers HT-55 PFPE heat transfer fluid 5
kg / 1 Gal Bottle
Brand: Solvey Galden
Place Of Origin: Itlay
Bolling Point: 55℃
Pour point: ＜-100
OTHER SUPERIOR PRODUCTS
Yasakawa Motor, Driver SG- Mitsubishi Motor HC-,HA-
Westinghouse Modules 1C-,5X- Emerson VE-,KJ-
Honeywell TC-,TK- Fanuc motor A0-
Rosemount transmitter 3051- Yokogawa transmitter EJA-
Contact person: Anna
Chemical product and Company information
Date Revised: May 24, 2005
Product Name: Galden HT 55
Chemical Name: Propene, 1,1,2,3,3,3-hexafluoro, oxidized,
Chemical Family: Fluorocarbons,
Perfluorinated polyethers Synonyms: None
Clear, colorless liquid. Thermal decomposition will generate
hydrogen fluoride (HF), which is corrosive.
Potential Health Effects
Effects of Overexposure:
Eye contact may cause slight irritation.
Skin contact may cause slight irritation.
Inhalation of vapors or mists may cause respiratory tract
No ill effects are expected.
First Aid Measures
Flush eyes for 15 minutes with copious amounts of water, retracting
eyelids often. Seek medical attention if irritation persists.
Wash skin thoroughly with mild soap and water. Flush with lukewarm
water for 15 minutes.
If symptoms of irritation, discomfort or overcome by exposure,
remove affected person to fresh air. Give oxygen or artificial
respiration as needed.
If conscious, drink three to four 8 ounce glasses of water or milk.
Call a physician. If unconscious, immediately take affected person
to a hospital. Do not give anything by mouth to an unconscious
Fire Fighting Measures
Flash Point: Not Applicable
Lower Explosive Limit: Not Applicable
Upper Explosive Limit: Not Applicable
Autoignition Temperature: Not Applicable
Extinguishing Media: Water (spray or fog), foam, dry chemical or
carbon dioxide (CO2).
Unusual Fire Hazards:
Fluoropolymers will degrade upon prolonged heating or in a fire,
liberating hydrogen fluoride (HF) and carbonyl fluoride (COF2).
This gas is toxic if inhaled or it comes into contact with moist
skin. HF has an ACGIH PEL TLV (8hr TWA) of 0.5ppm and a ceiling
limit of 2 ppm (1.7mg/m3). COF2 has an ACGIH TLV of 2 ppm (5.4
mg/m3) and an OSHA PEL TWA of 2 ppm (5 mg/m3).
Fire Fighting Procedures:
Use self contained breathing apparatus (SCBA) and skin protection
for acid gas exposure. Do not enter fire area without proper
protection. Fight fire from safe distance. If possible, air
monitoring should be performed.
Accidental Release Measures
Releases: In case of a release or spill, absorb material onto
vermiculite or similar inert absorbent. Use Perfluorosolv0 PFS-1 as
an aid in cleaning. Place spilled material into covered container
for disposal. Dispose of according to applicable local, state and
federal regulations. Extinguish all ignition sources and evacuate
the area. Exercise caution; spill area may be slippery.
Handling and Storage
Wash hands after use and before handling food or applying
cosmetics. Do not use tobacco products in the immediate area. Keep
containers closed. Keep away from heat, sparks and flames. Do not
store near combustible materials.
Exposure Controls/Personal Protection
ACGIH Threshold Limit Value (8 hr. time weighted average):
OSHA Permissible Exposure Limit Value (8 hr. time weighted
Ventilation Requirements: Local Exhaust:
Vent vapors or mists generated by processing away from operating
personnel. Local exhaust ventilation at a rate of 50 feet per
Personal Protective Equipment:
No occupational exposure standards have been developed for this
material. In situations where exposure to vapors or mists is
likely, NIOSH/MSHA approved respirators are recommended. Respirator
use limitations made by NIOSH/MSHA or the manufacturer must be
observed. Respiratory protection programs must be in accordance
with 29 CFR 1910.134.
Eye/Face Protection: ANSI Z87.1 approved safety glasses with side
shields or equivalent.
Rubber or latex recommended but not necessary.
Physical and Chemical Properties
Appearance: Clear liquid
Vapor Pressure: 228 torr
Vapor Density (Air=1): Not available
Boiling Point: 55
Melting Point: Not available
Specific Gravity: 1.7-1.9
Solubility in Water: Insoluble %
Volatile by Volume: 0
Stability and Reactivity
Stability: This material is stable.
Reactivity: This material is not reactive.
Conditions to Avoid: Heat, sparks, flames, and other ignition
sources; avoid heating above 290 C/554 F. Materials to Avoid:
Strong or non-aqueous alkali and Lewis acids above 100 C/212 F.
Hazardous Decomposition Products: Thermal decomposition of this
product will generate hydrogen fluoride (HF), which is corrosive,
causing burns on contact with skin and other tissue.
Incompatibility (Materials to Avoid): Alkali metals and halogenated
Rat oral LD50: greater than 25.65 g/kg
Rat intraperitoneal LD50: greater than 25 g/kg
Rat dermal LD50: greater than 2 g/kg Rabbit skin irritation: not
Rabbit eye irritation: not irritating Guinea pig sensitization: not
a sensitizer Material Safety Data Sheets contain country-specific
regulatory information; therefore, the MSDS’s provided are for use
only by customers of Solvay Solexis, Inc. in North America. If you
are located in a country other than Canada, Mexico or the United
States, please contact the Solvay Group company in your country for
MSDS information applicable to your location.
No ecotoxicological information is available for this material.
Disposal Considerations Waste Disposal:
Material, as supplied, is not a hazardous waste. Landfill according
to current federal, state and local regulations, or incinerate in a
high-temperature incinerator designed to burn fluorine-containing
materials. Processing, use or contamination may make this
information inaccurate or incomplete.
Shipping Class: Not regulated by DOT.
The previous information is based upon our current knowledge and
experience of our product and is not exhaustive. It applies to the
product as defined by the specifications. In case of combinations
or mixtures, one must confirm that no new hazards are likely to
exist. In any case, the user is not exempt from observing all
legal, administrative and regulatory procedures relating to the
product, personal hygiene, and integrity of the work environment.
(Unless noted to the contrary, the technical information applies
only to pure product).
Transportation information Shipping Class:
Not regulated by DOT.