QXQM-8 TENCAN 8L Lab Grinding Ultra fine powder prepare Full
Directional Planetary Ball Mill Machine
QXQM series planetary ball mill has four ball grinding tanks
installed on one disc. When the turn disc rotates, the mill pots
revolve on their own axis and make 360 degree rotation. And the
balls in the tanks grind and mix samples in high speed movement.
The product can smash and blend various products of different
materials and granularity with dry or wet methods. Minimum
granularity of ground samples can be as small as 0.1 micron meter.
It is widely used in the fields of Geology, Mining, Metallurgy,
Electronics, Construction Material, Ceramics, Chemical Engineering,
Light Industry Medicine, Environmental Protection etc.
- Ideal for wet or dry grinding application
- Automatic and programmable control with LED display
- multiple grinding modes to choose
- High Uniformity and excellent repeatability
- Four samples with different sizes and materials in one experiment
- Grinding chamber with a built-in fan for ventilation and long time
Planetary disk turnover rolling
Motor for turnover rolling can be controlled for stop and lock. 360
degrees turnover makes grinding jars rotating in multiply
directions without any dead angle.
Distinct designed gear with good stability and lower noise
Distinct gear with noise of 15-20db less than that of the same
Elegant process and fine workmanship
500 thousand high-end mold molding, 3 million precision machine
manuafacturing, exquisite and durable.
The main fileds of Application for planetary ball mill are
- Biology and Biotechnology
- Ceramics and Glass
- Construction Materials
- Environmental Research
- Mineralogy and Metallurgy
to name just a few.
Planetary ball mills are available in versions with 2 or 4 grinding
stations. The freely selectable machine settings, comprehensive
range of grinding jars made from top-quality materials as well as
the numerous possible balls charge combinations(number and ball
size) allow individual adaption of the grinding parameters to the particular
size reduction task.
Guidelines for sample amount and ball charge
As a rule of thumb, the grinding balls should be approximately 3 x
larger than the largest sample particle. In addition to the
instrument settings and the ball size, the filling level of the jar
is also of crucial importance for a successful grinding process in
When grinding bulk materials, the jar should be filled with approx.
1/3 sample and 1/3 ball charge. The remaining third is the free jar
volume that is necessary for the free movement of the balls.
If an increase or decrease in sample volume is to be expected
during the grinding process, the filling levels may be changed
according to the range give in the table below (in case of an
expected decrease in sample volume, a further deviation is
For wet grinding with grinding balls <3mm the ball charge should
make up 60% of the jar volume, while the sample amount should be
30%, Then density of the grinding ball materials is used to
calculate the mass of the required amount of grinding balls.
*Please note: The maximum recommended speed should be considered
when using those grinding ball sizes, please refer to the operating
manual for further information.
Application Area of Best price Small Lab Planetary Ball Mill with output 0.1 micron:
1. Geology and Mineralogy: rock, gravel, sand, minerals
2. Ceramics: porcelain, sintered ceramics, clay, fireclay
3. Chemistry: pesticides, fertilisers, salts, inorganic and organic materials
4. Biology: plants, leaves, freeze-dried samples
5. Pharmaceuticals: ophthalmological agents, gels, creams, extracts, drugs, pastes,
6. Metallurgy: ores, sinters
7. Material technology: pigments, precious materials, new materials, alloys, mechanical
alloying and activating
8. Analysis preparation: spectroscopy, X-ray fluorescence, X-ray structure analysis,
Technical Datas of Best price Small Lab Planetary Ball Mill with output 0.1 micron:
|Working Principle||impact and friction force|
|Compatible Non Vacuum Grinding Jars||(50ml~2000ml) * 4|
|Compatible Vacuum Grinding Jars||2000ml *4 grinding jars|
|Operation Mode||2 or 4 grinding jars working simultaneously|
|Feeding Granularity||Soil materials < 10mm, others materials < 3mm|
|Discharging Granularity||down to 0.1μm|
|Sample Type||hard, medium-hard, soft, fibrous, brittle, moist|
|Rotational Speed of Grinding Jar||580rpm|
|Rotational Speed Ratio (planetary disk/jar)||1 : -2|
|Drive Mode||gear drive and belt drive|
|Speed Control||stepless speed regulation|
|Electrical Details||220VAC, 50Hz, 1.5kW,|
|Max Continuous Grinding Time (full-load)||72hours|
|Weight (Net /Gross)||420KG /530KG|
Please note: for this TENCAN ball mill, you require two or four
grinding jars of your choice and the corresponding number of
grinding balls. The grinding jar material must be harder than the
material to be ground. In normal cases, grinding jars and balls of
the same material are used. To shorten the grinding time, larger or
heavier grinding jars and grinding balls with a higher density can
|Main Parameters of 8L 110 - 220v Full directional Laboratory
Planetary Ball Mill|
|Alternating Run Time of Forward & Reversal Rotation|
Accessories of Mill Jars & Balls
Available Mill Jars:
304 stainless steel mill jar, 316 stainless steel mill jar,
tungsten carbide mill jar, agate mill jar, alumina ceramic mill
jar(also called corundum mill jar), zirconia mill jar, nylon mill
jar, polyurethane mill jar, Teflon mill jar (PTFE), and etc.
Available Mill Balls:
304 stainless steel mill balls, 316 stainless steel mill balls,
tungsten carbide mill balls, agate mill balls, alumina balls,
zirconia mill balls, and etc.
Want to know more? Some questions? Want to buy?
Don't hesitate, contact us directly. You are warmly welcomed!