Hydraulic Paper Cutter guillotine
High speed CD series paper cutting machine use the worlds most
simple convenient operation of the computer. The displaying panel
use 5.7inch single colour industry computer with Chinese and
English language. It has 10 programs units, more than 999different
cutting positionThe motor for backguage variable frequency motor.
The data resolution0.05mm, The stepess and high precision paper
pusher can reach 10m/min. The position precision for paper pusher
can reach 0.10mm. Withcutting memory function and automatic paper
feeding function. The cutting speed can be up to 45 time/min and
the machine has automatic knife exchange assistance function. Adopt
the hydraulic components, Japan of Shanghai, Schneider, omron,
Components, the use of Japan low-maintenance bearings.
1. The working tables are all chrome-plated and equipped with air
balls which makes paper pushing easily and rusty proof. Push the
paper deft and mattress formed, shipped paper light weight mattress
effortless. Can be selected large side working table (1000*800 mm)
2. T lead screw(can be selected ball lead screw)and linear double
guide makes paper impeller run smooth, low noise, accurate
positioning, enhance the cutting precision and speed greatly,
prolong the service lift of paper cutter.
3. Flat worm speed reducer transmission.
4. The key part use Japan NSK bearings.
5. Electric control appliance adopt from French Schneider, safety
performance is high.
6. IR(Infrared Radiation) photoelectric protection, buttons by two
hands safety devices.
7. Safety device for knife bed, overloading protection for cutting,
automatic return safety device.
8. ISO standard hydraulic components are adopted in single
hydraulic system, the pressure can be adjusted. The paper is
pressed twice by pressure increased system.
9. Mechanical assistance device for knife replacement makes knife
replaced quickly and safely.
10. Equipped with the optical knife alignment to make cutting more
11. Ejecting device for knife bar.
12. Can be selected: (1)PLC control system
(2)Inside electronic knife locker to make the cutting more safety
|Cutting width(cm)||78||92 ||115 ||130|
|Cutting height(cm)||12||13||16.5||13 |
|Cutting length(cm)||78||92 ||115||130 |
|Main motor power(kw)||3||3 ||4||4 |
|Net weight(kg)||1800||2500 ||3800 ||3500 |
|width with sideway(cm)||195||212 ||265||280 |
|width without sideway(cm)||190||198 ||236.5 ||245 |
|length(cm)||183||205 ||246.5||258.5 |
|height(cm)||151||156 ||165 ||156 |
|Front table length(cm)||60||69 ||73.5||73.5 |
|table height(cm)||90||90 ||90 ||90 |
|Clamp pressure min(dan)||150||150 ||150 ||150 |
|Clamp pressure max(dan)||6000||6000 ||8000 ||8000 |
|Knife thickness(mm)||12.7||12.7 ||13.75||12.7 |
|Grinding reserve(cm)||3||3 ||6 ||3 |
|Smallest cut with out
false clamp(cm)||2||2.5 ||2.5 ||2.5 |
|Smallest cut with
false clamp(cm)||9||9 ||9.5 ||9 |
|Cutting speed(times/min)||45||45 ||45 ||45 |
|Packing sizel(cm)||215*137*185||225*140*191 ||275*140*200||275*140*191 |