XLB-08CF higt-speed bottle blowing machine:
|Number of cavities||8|
|Operating air consuming||1.2~1.5min|
|Blowing air consuming||3.0~5.0m3/min|
|Neck Diameter Range||12mm~38mm|
|Bottle Height(Below Neck)||≤240mm|
XLB series two-step full-automatic PETbottle blowingmachine is
consist of mechanical system, electric system, and pneumatic
system. The whole process is completed by the machine independently
instead of manual operation, which ensures the bottles are more
sanitary avoiding contamination.
The features of mechanical system:
A.The structure is single and the performance is stable and
B.Automatization and intellectualization
C.High efficiency and low energy consumption
D.It is stable running, energy-saving , easy to operate and
The features of electric system:
A. The Japanese series Mitsubishi motor with high performance or
European series Schneider PLC is adopted as CPU.
B. Adopt Japanese series or European series servo system for high-
C. Adopt the color touch screen as the human-computer interface,
which is simple and convenient for operating and monitoring
D. The monitoring system can monitor the operating status of every
part, automatically detect the mulfunctions, which is convenient
The advantages of our machine
1. Simple structure--- stable running
Xili blow molding machines are all of linear structure, main
components used are
all real imported pieces.” only an electrician can find and solve
the problem at one look when the machine gets malfunctions”
summarized by one of our customers. Its simple structure needs
minimum maintenance, so it can save cost for you.
2. Technological innovation in clamping system.
We adopt clamping manipulator of simple structure, special designed
to the height of bottle, which ensure balance power capacity of
each part of the bottle. It is an effective solution to swelling
mould and big mould line; it avoids the insecurity of the hydraulic
system (high-pressure pipeline burst) and oil spills (hydraulic
station spills). Cylinder promote template, will protect mould.
3. The main spare parts are accorded to the international standard
We choose international standard assemblage which will ensure our
machine reliable and stable performance and convenience to machine.
4. Applying the servo system.
We use servo system of Mitsubishi to locate in high speed, finding
the position of chain by fiber and photoelectric switch, then
signal the PLC of Mitsubishi in high speed, the dictate locate mode
10PG will signal the servo magnifier, pass through the high
exactitude rolling coder inside the servo motor to inspect the
position of chain, feed back to the control system, so that the
dictate locate mode 10PG of PLC of Mitsubishi begin locating. So
once the machine is turned on, the heating head and the seal face
of pleasure cylinder will locate fleetly, exactly and steadily,
this increase the working efficiency.
5. Apply the auto-settle preform machine
When the auto-settle preform machine settle the preform, every
tunnel has a photoelectric sensor to inspect the preform to insure
the preforms are averaged in every tunnel; if one tunnel is lack of
preforms in allowed time, the warning system will warn to filling
preforms into the hopper instead of stopping the whole machine. It
insures the machine go on wheels.
6. Open heating system
Xili blow molding machines adopting open heating system, make full
use of hot air flow as a heat transfer medium, and lenthened
heating orbit to prolong the heating time. By measuring, it saves
nearly half the energy that closed heating system consumed.
7. Low maintenance cost.
A. It is well-known that in the market the price of non-standard
pieces is lower at least half than the standard. Xili blow molding
machines all adopt standard ones, the maintenance fittings are very
B. Xili blow molding machines’ simple structure determines low
requirement of maintenance personnel, which also can save labor